arch/arm/boot/dts/omap5-board-common.dtsi

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 #include "omap5.dtsi"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11
  12 / {
  13         aliases {
  14                 display0 = &hdmi0;
  15         };
  16
  17         vmmcsd_fixed: fixedregulator-mmcsd {
  18                 compatible = "regulator-fixed";
  19                 regulator-name = "vmmcsd_fixed";
  20                 regulator-min-microvolt = <3000000>;
  21                 regulator-max-microvolt = <3000000>;
  22         };
  23
  24         mmc3_pwrseq: sdhci0_pwrseq {
  25                 compatible = "mmc-pwrseq-simple";
  26                 clocks = <&clk32kgaudio>;
  27                 clock-names = "ext_clock";
  28         };
  29
  30         vmmcsdio_fixed: fixedregulator-mmcsdio {
  31                 compatible = "regulator-fixed";
  32                 regulator-name = "vmmcsdio_fixed";
  33                 regulator-min-microvolt = <1800000>;
  34                 regulator-max-microvolt = <1800000>;
  35                 gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;    /* gpio140 WLAN_EN */
  36                 enable-active-high;
  37                 startup-delay-us = <70000>;
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&wlan_pins>;
  40         };
  41
  42         /* HS USB Host PHY on PORT 2 */
  43         hsusb2_phy: hsusb2_phy {
  44                 compatible = "usb-nop-xceiv";
  45                 reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
  46                 clocks = <&auxclk1_ck>;
  47                 clock-names = "main_clk";
  48                 clock-frequency = <19200000>;
  49         };
  50
  51         /* HS USB Host PHY on PORT 3 */
  52         hsusb3_phy: hsusb3_phy {
  53                 compatible = "usb-nop-xceiv";
  54                 reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
  55         };
  56
  57         leds {
  58                 compatible = "gpio-leds";
  59                 led@1 {
  60                         label = "omap5:blue:usr1";
  61                         gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
  62                         linux,default-trigger = "heartbeat";
  63                         default-state = "off";
  64                 };
  65         };
  66
  67         tpd12s015: encoder@0 {
  68                 compatible = "ti,tpd12s015";
  69
  70                 pinctrl-names = "default";
  71                 pinctrl-0 = <&tpd12s015_pins>;
  72
  73                 /* gpios defined in the board specific dts */
  74
  75                 ports {
  76                         #address-cells = <1>;
  77                         #size-cells = <0>;
  78
  79                         port@0 {
  80                                 reg = <0>;
  81
  82                                 tpd12s015_in: endpoint@0 {
  83                                         remote-endpoint = <&hdmi_out>;
  84                                 };
  85                         };
  86
  87                         port@1 {
  88                                 reg = <1>;
  89
  90                                 tpd12s015_out: endpoint@0 {
  91                                         remote-endpoint = <&hdmi_connector_in>;
  92                                 };
  93                         };
  94                 };
  95         };
  96
  97         hdmi0: connector@0 {
  98                 compatible = "hdmi-connector";
  99                 label = "hdmi";
 100
 101                 type = "b";
 102
 103                 port {
 104                         hdmi_connector_in: endpoint {
 105                                 remote-endpoint = <&tpd12s015_out>;
 106                         };
 107                 };
 108         };
 109
 110         sound: sound {
 111                 compatible = "ti,abe-twl6040";
 112                 ti,model = "omap5-uevm";
 113
 114                 ti,mclk-freq = <19200000>;
 115
 116                 ti,mcpdm = <&mcpdm>;
 117
 118                 ti,twl6040 = <&twl6040>;
 119
 120                 /* Audio routing */
 121                 ti,audio-routing =
 122                         "Headset Stereophone", "HSOL",
 123                         "Headset Stereophone", "HSOR",
 124                         "Line Out", "AUXL",
 125                         "Line Out", "AUXR",
 126                         "HSMIC", "Headset Mic",
 127                         "Headset Mic", "Headset Mic Bias",
 128                         "AFML", "Line In",
 129                         "AFMR", "Line In";
 130         };
 131 };
 132
 133 &gpio8 {
 134         /* TI trees use GPIO instead of msecure, see also muxing */
 135         p234 {
 136                 gpio-hog;
 137                 gpios = <10 GPIO_ACTIVE_HIGH>;
 138                 output-high;
 139                 line-name = "gpio8_234/msecure";
 140         };
 141 };
 142
 143 &omap5_pmx_core {
 144         pinctrl-names = "default";
 145         pinctrl-0 = <
 146                         &usbhost_pins
 147                         &led_gpio_pins
 148         >;
 149
 150         twl6040_pins: pinmux_twl6040_pins {
 151                 pinctrl-single,pins = <
 152                         0x17e (PIN_OUTPUT | MUX_MODE6)  /* mcspi1_somi.gpio5_141 */
 153                 >;
 154         };
 155
 156         mcpdm_pins: pinmux_mcpdm_pins {
 157                 pinctrl-single,pins = <
 158                         0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* abe_clks.abe_clks */
 159                         0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* abemcpdm_ul_data.abemcpdm_ul_data */
 160                         0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* abemcpdm_dl_data.abemcpdm_dl_data */
 161                         0x160 (PIN_INPUT_PULLUP | MUX_MODE0)    /* abemcpdm_frame.abemcpdm_frame */
 162                         0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* abemcpdm_lb_clk.abemcpdm_lb_clk */
 163                 >;
 164         };
 165
 166         mcbsp1_pins: pinmux_mcbsp1_pins {
 167                 pinctrl-single,pins = <
 168                         0x14c (PIN_INPUT | MUX_MODE1)           /* abedmic_clk2.abemcbsp1_fsx */
 169                         0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
 170                         0x150 (PIN_INPUT | MUX_MODE1)           /* abeslimbus1_clock.abemcbsp1_clkx */
 171                         0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* abeslimbus1_data.abemcbsp1_dr */
 172                 >;
 173         };
 174
 175         mcbsp2_pins: pinmux_mcbsp2_pins {
 176                 pinctrl-single,pins = <
 177                         0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* abemcbsp2_dr.abemcbsp2_dr */
 178                         0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
 179                         0x158 (PIN_INPUT | MUX_MODE0)           /* abemcbsp2_fsx.abemcbsp2_fsx */
 180                         0x15a (PIN_INPUT | MUX_MODE0)           /* abemcbsp2_clkx.abemcbsp2_clkx */
 181                 >;
 182         };
 183
 184         i2c1_pins: pinmux_i2c1_pins {
 185                 pinctrl-single,pins = <
 186                         0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl */
 187                         0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda */
 188                 >;
 189         };
 190
 191         mcspi2_pins: pinmux_mcspi2_pins {
 192                 pinctrl-single,pins = <
 193                         0xbc (PIN_INPUT | MUX_MODE0)            /*  mcspi2_clk */
 194                         0xbe (PIN_INPUT | MUX_MODE0)            /*  mcspi2_simo */
 195                         0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)     /*  mcspi2_somi */
 196                         0xc2 (PIN_OUTPUT | MUX_MODE0)           /*  mcspi2_cs0 */
 197                 >;
 198         };
 199
 200         mcspi3_pins: pinmux_mcspi3_pins {
 201                 pinctrl-single,pins = <
 202                         0x78 (PIN_INPUT | MUX_MODE1)            /*  mcspi3_somi */
 203                         0x7a (PIN_INPUT | MUX_MODE1)            /*  mcspi3_cs0 */
 204                         0x7c (PIN_INPUT | MUX_MODE1)            /*  mcspi3_simo */
 205                         0x7e (PIN_INPUT | MUX_MODE1)            /*  mcspi3_clk */
 206                 >;
 207         };
 208
 209         mmc3_pins: pinmux_mmc3_pins {
 210                 pinctrl-single,pins = <
 211                         OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
 212                         OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
 213                         OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
 214                         OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
 215                         OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
 216                         OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
 217                 >;
 218         };
 219
 220         wlan_pins: pinmux_wlan_pins {
 221                 pinctrl-single,pins = <
 222                         OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
 223                 >;
 224         };
 225
 226         /* TI trees use GPIO mode; msecure mode does not work reliably? */
 227         palmas_msecure_pins: palmas_msecure_pins {
 228                 pinctrl-single,pins = <
 229                         OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
 230                 >;
 231         };
 232
 233         usbhost_pins: pinmux_usbhost_pins {
 234                 pinctrl-single,pins = <
 235                         0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
 236                         0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
 237
 238                         0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
 239                         0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
 240
 241                         0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
 242                         0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
 243                 >;
 244         };
 245
 246         led_gpio_pins: pinmux_led_gpio_pins {
 247                 pinctrl-single,pins = <
 248                         0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
 249                 >;
 250         };
 251
 252         uart1_pins: pinmux_uart1_pins {
 253                 pinctrl-single,pins = <
 254                         0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
 255                         0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
 256                         0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
 257                         0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
 258                 >;
 259         };
 260
 261         uart3_pins: pinmux_uart3_pins {
 262                 pinctrl-single,pins = <
 263                         0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
 264                         0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
 265                 >;
 266         };
 267
 268         uart5_pins: pinmux_uart5_pins {
 269                 pinctrl-single,pins = <
 270                         0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
 271                         0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
 272                         0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
 273                         0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
 274                 >;
 275         };
 276
 277         dss_hdmi_pins: pinmux_dss_hdmi_pins {
 278                 pinctrl-single,pins = <
 279                         0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)    /* hdmi_cec.hdmi_cec */
 280                         0x100 (PIN_INPUT | MUX_MODE0)   /* hdmi_ddc_scl.hdmi_ddc_scl */
 281                         0x102 (PIN_INPUT | MUX_MODE0)   /* hdmi_ddc_sda.hdmi_ddc_sda */
 282                 >;
 283         };
 284
 285         tpd12s015_pins: pinmux_tpd12s015_pins {
 286                 pinctrl-single,pins = <
 287                         0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)  /* hdmi_hpd.gpio7_193 */
 288                 >;
 289         };
 290 };
 291
 292 &omap5_pmx_wkup {
 293         pinctrl-names = "default";
 294         pinctrl-0 = <
 295                         &usbhost_wkup_pins
 296         >;
 297
 298         palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
 299                 pinctrl-single,pins = <
 300                         OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
 301                 >;
 302         };
 303
 304         usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 305                 pinctrl-single,pins = <
 306                         0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
 307                 >;
 308         };
 309
 310         wlcore_irq_pin: pinmux_wlcore_irq_pin {
 311                 pinctrl-single,pins = <
 312                         OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6)    /* llia_wakereqin.gpio1_wk14 */
 313                 >;
 314         };
 315 };
 316
 317 &mmc1 {
 318         vmmc-supply = <&ldo9_reg>;
 319         bus-width = <4>;
 320 };
 321
 322 &mmc2 {
 323         vmmc-supply = <&vmmcsd_fixed>;
 324         bus-width = <8>;
 325         ti,non-removable;
 326 };
 327
 328 &mmc3 {
 329         vmmc-supply = <&vmmcsdio_fixed>;
 330         mmc-pwrseq = <&mmc3_pwrseq>;
 331         bus-width = <4>;
 332         non-removable;
 333         cap-power-off-card;
 334         pinctrl-names = "default";
 335         pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>;
 336         interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 337                                &omap5_pmx_core 0x168>;
 338
 339         #address-cells = <1>;
 340         #size-cells = <0>;
 341         wlcore: wlcore@2 {
 342                 compatible = "ti,wl1271";
 343                 reg = <2>;
 344                 interrupt-parent = <&gpio1>;
 345                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;  /* gpio 14 */
 346                 ref-clock-frequency = <26000000>;
 347         };
 348 };
 349
 350 &mmc4 {
 351         status = "disabled";
 352 };
 353
 354 &mmc5 {
 355         status = "disabled";
 356 };
 357
 358 &i2c1 {
 359         pinctrl-names = "default";
 360         pinctrl-0 = <&i2c1_pins>;
 361
 362         clock-frequency = <400000>;
 363
 364         palmas: palmas@48 {
 365                 compatible = "ti,palmas";
 366                 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
 367                 reg = <0x48>;
 368                 interrupt-controller;
 369                 #interrupt-cells = <2>;
 370                 ti,system-power-controller;
 371                 pinctrl-names = "default";
 372                 pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 373
 374                 extcon_usb3: palmas_usb {
 375                         compatible = "ti,palmas-usb-vid";
 376                         ti,enable-vbus-detection;
 377                         ti,enable-id-detection;
 378                         ti,wakeup;
 379                 };
 380
 381                 clk32kgaudio: palmas_clk32k@1 {
 382                         compatible = "ti,palmas-clk32kgaudio";
 383                         #clock-cells = <0>;
 384                 };
 385
 386                 palmas_pmic {
 387                         compatible = "ti,palmas-pmic";
 388                         interrupt-parent = <&palmas>;
 389                         interrupts = <14 IRQ_TYPE_NONE>;
 390                         interrupt-name = "short-irq";
 391
 392                         ti,ldo6-vibrator;
 393
 394                         regulators {
 395                                 smps123_reg: smps123 {
 396                                         /* VDD_OPP_MPU */
 397                                         regulator-name = "smps123";
 398                                         regulator-min-microvolt = < 600000>;
 399                                         regulator-max-microvolt = <1500000>;
 400                                         regulator-always-on;
 401                                         regulator-boot-on;
 402                                 };
 403
 404                                 smps45_reg: smps45 {
 405                                         /* VDD_OPP_MM */
 406                                         regulator-name = "smps45";
 407                                         regulator-min-microvolt = < 600000>;
 408                                         regulator-max-microvolt = <1310000>;
 409                                         regulator-always-on;
 410                                         regulator-boot-on;
 411                                 };
 412
 413                                 smps6_reg: smps6 {
 414                                         /* VDD_DDR3 - over VDD_SMPS6 */
 415                                         regulator-name = "smps6";
 416                                         regulator-min-microvolt = <1200000>;
 417                                         regulator-max-microvolt = <1200000>;
 418                                         regulator-always-on;
 419                                         regulator-boot-on;
 420                                 };
 421
 422                                 smps7_reg: smps7 {
 423                                         /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 424                                         regulator-name = "smps7";
 425                                         regulator-min-microvolt = <1800000>;
 426                                         regulator-max-microvolt = <1800000>;
 427                                         regulator-always-on;
 428                                         regulator-boot-on;
 429                                 };
 430
 431                                 smps8_reg: smps8 {
 432                                         /* VDD_OPP_CORE */
 433                                         regulator-name = "smps8";
 434                                         regulator-min-microvolt = < 600000>;
 435                                         regulator-max-microvolt = <1310000>;
 436                                         regulator-always-on;
 437                                         regulator-boot-on;
 438                                 };
 439
 440                                 smps9_reg: smps9 {
 441                                         /* VDDA_2v1_AUD over VDD_2v1 */
 442                                         regulator-name = "smps9";
 443                                         regulator-min-microvolt = <2100000>;
 444                                         regulator-max-microvolt = <2100000>;
 445                                         ti,smps-range = <0x80>;
 446                                 };
 447
 448                                 smps10_out2_reg: smps10_out2 {
 449                                         /* VBUS_5V_OTG */
 450                                         regulator-name = "smps10_out2";
 451                                         regulator-min-microvolt = <5000000>;
 452                                         regulator-max-microvolt = <5000000>;
 453                                         regulator-always-on;
 454                                         regulator-boot-on;
 455                                 };
 456
 457                                 smps10_out1_reg: smps10_out1 {
 458                                         /* VBUS_5V_OTG */
 459                                         regulator-name = "smps10_out1";
 460                                         regulator-min-microvolt = <5000000>;
 461                                         regulator-max-microvolt = <5000000>;
 462                                 };
 463
 464                                 ldo1_reg: ldo1 {
 465                                         /* VDDAPHY_CAM: vdda_csiport */
 466                                         regulator-name = "ldo1";
 467                                         regulator-min-microvolt = <1500000>;
 468                                         regulator-max-microvolt = <1800000>;
 469                                 };
 470
 471                                 ldo2_reg: ldo2 {
 472                                         /* VCC_2V8_DISP: Does not go anywhere */
 473                                         regulator-name = "ldo2";
 474                                         regulator-min-microvolt = <2800000>;
 475                                         regulator-max-microvolt = <2800000>;
 476                                         /* Unused */
 477                                         status = "disabled";
 478                                 };
 479
 480                                 ldo3_reg: ldo3 {
 481                                         /* VDDAPHY_MDM: vdda_lli */
 482                                         regulator-name = "ldo3";
 483                                         regulator-min-microvolt = <1500000>;
 484                                         regulator-max-microvolt = <1500000>;
 485                                         regulator-boot-on;
 486                                         /* Only if Modem is used */
 487                                         status = "disabled";
 488                                 };
 489
 490                                 ldo4_reg: ldo4 {
 491                                         /* VDDAPHY_DISP: vdda_dsiport/hdmi */
 492                                         regulator-name = "ldo4";
 493                                         regulator-min-microvolt = <1500000>;
 494                                         regulator-max-microvolt = <1800000>;
 495                                 };
 496
 497                                 ldo5_reg: ldo5 {
 498                                         /* VDDA_1V8_PHY: usb/sata/hdmi.. */
 499                                         regulator-name = "ldo5";
 500                                         regulator-min-microvolt = <1800000>;
 501                                         regulator-max-microvolt = <1800000>;
 502                                         regulator-always-on;
 503                                         regulator-boot-on;
 504                                 };
 505
 506                                 ldo6_reg: ldo6 {
 507                                         /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 508                                         regulator-name = "ldo6";
 509                                         regulator-min-microvolt = <1200000>;
 510                                         regulator-max-microvolt = <1200000>;
 511                                         regulator-always-on;
 512                                         regulator-boot-on;
 513                                 };
 514
 515                                 ldo7_reg: ldo7 {
 516                                         /* VDD_VPP: vpp1 */
 517                                         regulator-name = "ldo7";
 518                                         regulator-min-microvolt = <2000000>;
 519                                         regulator-max-microvolt = <2000000>;
 520                                         /* Only for efuse reprograming! */
 521                                         status = "disabled";
 522                                 };
 523
 524                                 ldo8_reg: ldo8 {
 525                                         /* VDD_3v0: Does not go anywhere */
 526                                         regulator-name = "ldo8";
 527                                         regulator-min-microvolt = <3000000>;
 528                                         regulator-max-microvolt = <3000000>;
 529                                         regulator-boot-on;
 530                                         /* Unused */
 531                                         status = "disabled";
 532                                 };
 533
 534                                 ldo9_reg: ldo9 {
 535                                         /* VCC_DV_SDIO: vdds_sdcard */
 536                                         regulator-name = "ldo9";
 537                                         regulator-min-microvolt = <1800000>;
 538                                         regulator-max-microvolt = <3000000>;
 539                                         regulator-boot-on;
 540                                 };
 541
 542                                 ldoln_reg: ldoln {
 543                                         /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 544                                         regulator-name = "ldoln";
 545                                         regulator-min-microvolt = <1800000>;
 546                                         regulator-max-microvolt = <1800000>;
 547                                         regulator-always-on;
 548                                         regulator-boot-on;
 549                                 };
 550
 551                                 ldousb_reg: ldousb {
 552                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 553                                         regulator-name = "ldousb";
 554                                         regulator-min-microvolt = <3250000>;
 555                                         regulator-max-microvolt = <3250000>;
 556                                         regulator-always-on;
 557                                         regulator-boot-on;
 558                                 };
 559
 560                                 regen3_reg: regen3 {
 561                                         /* REGEN3 controls LDO9 supply to card */
 562                                         regulator-name = "regen3";
 563                                         regulator-always-on;
 564                                         regulator-boot-on;
 565                                 };
 566                         };
 567                 };
 568
 569                 palmas_power_button: palmas_power_button {
 570                         compatible = "ti,palmas-pwrbutton";
 571                         interrupt-parent = <&palmas>;
 572                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 573                         wakeup-source;
 574                 };
 575         };
 576
 577         twl6040: twl@4b {
 578                 compatible = "ti,twl6040";
 579                 reg = <0x4b>;
 580
 581                 pinctrl-names = "default";
 582                 pinctrl-0 = <&twl6040_pins>;
 583
 584                 interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
 585                 ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
 586
 587                 vio-supply = <&smps7_reg>;
 588                 v2v1-supply = <&smps9_reg>;
 589                 enable-active-high;
 590
 591                 clocks = <&clk32kgaudio>;
 592                 clock-names = "clk32k";
 593         };
 594 };
 595
 596 &mcpdm {
 597         pinctrl-names = "default";
 598         pinctrl-0 = <&mcpdm_pins>;
 599         status = "okay";
 600 };
 601
 602 &mcbsp1 {
 603         pinctrl-names = "default";
 604         pinctrl-0 = <&mcbsp1_pins>;
 605         status = "okay";
 606 };
 607
 608 &mcbsp2 {
 609         pinctrl-names = "default";
 610         pinctrl-0 = <&mcbsp2_pins>;
 611         status = "okay";
 612 };
 613
 614 &usbhshost {
 615         port2-mode = "ehci-hsic";
 616         port3-mode = "ehci-hsic";
 617 };
 618
 619 &usbhsehci {
 620         phys = <0 &hsusb2_phy &hsusb3_phy>;
 621 };
 622
 623 &usb3 {
 624         extcon = <&extcon_usb3>;
 625         vbus-supply = <&smps10_out1_reg>;
 626 };
 627
 628 &mcspi1 {
 629
 630 };
 631
 632 &mcspi2 {
 633         pinctrl-names = "default";
 634         pinctrl-0 = <&mcspi2_pins>;
 635 };
 636
 637 &mcspi3 {
 638         pinctrl-names = "default";
 639         pinctrl-0 = <&mcspi3_pins>;
 640 };
 641
 642 &uart1 {
 643         pinctrl-names = "default";
 644         pinctrl-0 = <&uart1_pins>;
 645 };
 646
 647 &uart3 {
 648         pinctrl-names = "default";
 649         pinctrl-0 = <&uart3_pins>;
 650         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 651                               <&omap5_pmx_core 0x19c>;
 652 };
 653
 654 &uart5 {
 655         pinctrl-names = "default";
 656         pinctrl-0 = <&uart5_pins>;
 657 };
 658
 659 &cpu0 {
 660         cpu0-supply = <&smps123_reg>;
 661 };
 662
 663 &dss {
 664         status = "ok";
 665 };
 666
 667 &hdmi {
 668         status = "ok";
 669
 670         /* vdda-supply populated in board specific dts file */
 671
 672         pinctrl-names = "default";
 673         pinctrl-0 = <&dss_hdmi_pins>;
 674
 675         port {
 676                 hdmi_out: endpoint {
 677                         remote-endpoint = <&tpd12s015_in>;
 678                 };
 679         };
 680 };