2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "omap443x.dtsi"
11 #include "elpida_ecb240abacn.dtsi"
14 model = "TI OMAP4 SDP board";
15 compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
18 device_type = "memory";
19 reg = <0x80000000 0x40000000>; /* 1 GB */
28 vdd_eth: fixedregulator-vdd-eth {
29 compatible = "regulator-fixed";
30 regulator-name = "VDD_ETH";
31 regulator-min-microvolt = <3300000>;
32 regulator-max-microvolt = <3300000>;
33 gpio = <&gpio2 16 0>; /* gpio line 48 */
38 vbat: fixedregulator-vbat {
39 compatible = "regulator-fixed";
40 regulator-name = "VBAT";
41 regulator-min-microvolt = <3750000>;
42 regulator-max-microvolt = <3750000>;
47 compatible = "gpio-leds";
49 label = "omap4:green:debug0";
50 gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
54 label = "omap4:green:debug1";
55 gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
59 label = "omap4:green:debug2";
60 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
64 label = "omap4:green:debug3";
65 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
69 label = "omap4:green:debug4";
70 gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
74 label = "omap4:blue:user";
75 gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
79 label = "omap4:red:user";
80 gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
84 label = "omap4:green:user";
85 gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
90 compatible = "pwm-leds";
92 label = "omap4::keypad";
93 pwms = <&twl_pwm 0 7812500>;
94 max-brightness = <127>;
98 label = "omap4:green:chrg";
99 pwms = <&twl_pwmled 0 7812500>;
100 max-brightness = <255>;
105 compatible = "pwm-backlight";
106 pwms = <&twl_pwm 1 7812500>;
107 brightness-levels = <
112 default-brightness-level = <13>;
116 compatible = "ti,abe-twl6040";
117 ti,model = "SDP4430";
119 ti,jack-detection = <1>;
120 ti,mclk-freq = <38400000>;
125 ti,twl6040 = <&twl6040>;
129 "Headset Stereophone", "HSOL",
130 "Headset Stereophone", "HSOR",
131 "Earphone Spk", "EP",
136 "Vibrator", "VIBRAL",
137 "Vibrator", "VIBRAR",
138 "HSMIC", "Headset Mic",
139 "Headset Mic", "Headset Mic Bias",
140 "MAINMIC", "Main Handset Mic",
141 "Main Handset Mic", "Main Mic Bias",
142 "SUBMIC", "Sub Handset Mic",
143 "Sub Handset Mic", "Main Mic Bias",
146 "DMic", "Digital Mic",
147 "Digital Mic", "Digital Mic1 Bias";
150 /* regulator for wl12xx on sdio5 */
151 wl12xx_vmmc: wl12xx_vmmc {
152 pinctrl-names = "default";
153 pinctrl-0 = <&wl12xx_gpio>;
154 compatible = "regulator-fixed";
155 regulator-name = "vwl1271";
156 regulator-min-microvolt = <1800000>;
157 regulator-max-microvolt = <1800000>;
158 gpio = <&gpio2 22 0>;
159 startup-delay-us = <70000>;
163 tpd12s015: encoder@0 {
164 compatible = "ti,tpd12s015";
166 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
167 <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
168 <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
171 #address-cells = <1>;
177 tpd12s015_in: endpoint@0 {
178 remote-endpoint = <&hdmi_out>;
185 tpd12s015_out: endpoint@0 {
186 remote-endpoint = <&hdmi_connector_in>;
193 compatible = "hdmi-connector";
199 hdmi_connector_in: endpoint {
200 remote-endpoint = <&tpd12s015_out>;
207 pinctrl-names = "default";
213 uart2_pins: pinmux_uart2_pins {
214 pinctrl-single,pins = <
215 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
216 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
217 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
218 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
222 uart3_pins: pinmux_uart3_pins {
223 pinctrl-single,pins = <
224 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
225 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
226 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
227 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
231 uart4_pins: pinmux_uart4_pins {
232 pinctrl-single,pins = <
233 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
234 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
238 twl6040_pins: pinmux_twl6040_pins {
239 pinctrl-single,pins = <
240 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
241 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
245 mcpdm_pins: pinmux_mcpdm_pins {
246 pinctrl-single,pins = <
247 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
248 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
249 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
250 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
251 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
255 dmic_pins: pinmux_dmic_pins {
256 pinctrl-single,pins = <
257 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
258 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
259 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
260 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
264 mcbsp1_pins: pinmux_mcbsp1_pins {
265 pinctrl-single,pins = <
266 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
267 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
268 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
269 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
273 mcbsp2_pins: pinmux_mcbsp2_pins {
274 pinctrl-single,pins = <
275 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
276 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
277 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
278 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
282 mcspi1_pins: pinmux_mcspi1_pins {
283 pinctrl-single,pins = <
284 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
285 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
286 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
287 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
291 dss_hdmi_pins: pinmux_dss_hdmi_pins {
292 pinctrl-single,pins = <
293 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
294 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
295 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
299 tpd12s015_pins: pinmux_tpd12s015_pins {
300 pinctrl-single,pins = <
301 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
302 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
303 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
307 i2c1_pins: pinmux_i2c1_pins {
308 pinctrl-single,pins = <
309 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
310 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
314 i2c2_pins: pinmux_i2c2_pins {
315 pinctrl-single,pins = <
316 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
317 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
321 i2c3_pins: pinmux_i2c3_pins {
322 pinctrl-single,pins = <
323 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
324 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
328 i2c4_pins: pinmux_i2c4_pins {
329 pinctrl-single,pins = <
330 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
331 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
335 /* wl12xx GPIO output for WLAN_EN */
336 wl12xx_gpio: pinmux_wl12xx_gpio {
337 pinctrl-single,pins = <
338 0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
342 /* wl12xx GPIO inputs and SDIO pins */
343 wl12xx_pins: pinmux_wl12xx_pins {
344 pinctrl-single,pins = <
345 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
346 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
347 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
348 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
349 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
350 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
351 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
357 pinctrl-names = "default";
358 pinctrl-0 = <&i2c1_pins>;
360 clock-frequency = <400000>;
364 /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
365 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
366 interrupt-parent = <&gic>;
370 compatible = "ti,twl6040";
373 pinctrl-names = "default";
374 pinctrl-0 = <&twl6040_pins>;
376 /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
377 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
378 interrupt-parent = <&gic>;
379 ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
381 vio-supply = <&v1v8>;
382 v2v1-supply = <&v2v1>;
385 /* regulators for vibra motor */
386 vddvibl-supply = <&vbat>;
387 vddvibr-supply = <&vbat>;
390 /* Vibra driver, motor resistance parameters */
391 ti,vibldrv-res = <8>;
392 ti,vibrdrv-res = <3>;
393 ti,viblmotor-res = <10>;
394 ti,vibrmotor-res = <10>;
399 #include "twl6030.dtsi"
400 #include "twl6030_omap4.dtsi"
403 pinctrl-names = "default";
404 pinctrl-0 = <&i2c2_pins>;
406 clock-frequency = <400000>;
410 pinctrl-names = "default";
411 pinctrl-0 = <&i2c3_pins>;
413 clock-frequency = <400000>;
417 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
420 compatible = "ti,tmp105";
425 * Ambient Light Sensor
426 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
429 compatible = "rohm,bh1780";
435 pinctrl-names = "default";
436 pinctrl-0 = <&i2c4_pins>;
438 clock-frequency = <400000>;
441 * 3-Axis Digital Compass
442 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
445 compatible = "honeywell,hmc5843";
451 pinctrl-names = "default";
452 pinctrl-0 = <&mcspi1_pins>;
455 compatible = "ks8851";
456 spi-max-frequency = <24000000>;
458 interrupt-parent = <&gpio2>;
459 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
460 vdd-supply = <&vdd_eth>;
465 vmmc-supply = <&vmmc>;
470 vmmc-supply = <&vaux1>;
484 pinctrl-names = "default";
485 pinctrl-0 = <&wl12xx_pins>;
486 vmmc-supply = <&wl12xx_vmmc>;
494 device-handle = <&elpida_ECB240ABACN>;
499 device-handle = <&elpida_ECB240ABACN>;
503 keypad,num-rows = <8>;
504 keypad,num-columns = <8>;
505 linux,keymap = <0x00000012 /* KEY_E */
506 0x00010013 /* KEY_R */
507 0x00020014 /* KEY_T */
508 0x00030066 /* KEY_HOME */
509 0x0004003f /* KEY_F5 */
510 0x000500f0 /* KEY_UNKNOWN */
511 0x00060017 /* KEY_I */
512 0x0007002a /* KEY_LEFTSHIFT */
513 0x01000020 /* KEY_D*/
514 0x01010021 /* KEY_F */
515 0x01020022 /* KEY_G */
516 0x010300e7 /* KEY_SEND */
517 0x01040040 /* KEY_F6 */
518 0x010500f0 /* KEY_UNKNOWN */
519 0x01060025 /* KEY_K */
520 0x0107001c /* KEY_ENTER */
521 0x0200002d /* KEY_X */
522 0x0201002e /* KEY_C */
523 0x0202002f /* KEY_V */
524 0x0203006b /* KEY_END */
525 0x02040041 /* KEY_F7 */
526 0x020500f0 /* KEY_UNKNOWN */
527 0x02060034 /* KEY_DOT */
528 0x0207003a /* KEY_CAPSLOCK */
529 0x0300002c /* KEY_Z */
530 0x0301004e /* KEY_KPLUS */
531 0x03020030 /* KEY_B */
532 0x0303003b /* KEY_F1 */
533 0x03040042 /* KEY_F8 */
534 0x030500f0 /* KEY_UNKNOWN */
535 0x03060018 /* KEY_O */
536 0x03070039 /* KEY_SPACE */
537 0x04000011 /* KEY_W */
538 0x04010015 /* KEY_Y */
539 0x04020016 /* KEY_U */
540 0x0403003c /* KEY_F2 */
541 0x04040073 /* KEY_VOLUMEUP */
542 0x040500f0 /* KEY_UNKNOWN */
543 0x04060026 /* KEY_L */
544 0x04070069 /* KEY_LEFT */
545 0x0500001f /* KEY_S */
546 0x05010023 /* KEY_H */
547 0x05020024 /* KEY_J */
548 0x0503003d /* KEY_F3 */
549 0x05040043 /* KEY_F9 */
550 0x05050072 /* KEY_VOLUMEDOWN */
551 0x05060032 /* KEY_M */
552 0x0507006a /* KEY_RIGHT */
553 0x06000010 /* KEY_Q */
554 0x0601001e /* KEY_A */
555 0x06020031 /* KEY_N */
556 0x0603009e /* KEY_BACK */
557 0x0604000e /* KEY_BACKSPACE */
558 0x060500f0 /* KEY_UNKNOWN */
559 0x06060019 /* KEY_P */
560 0x06070067 /* KEY_UP */
561 0x07000094 /* KEY_PROG1 */
562 0x07010095 /* KEY_PROG2 */
563 0x070200ca /* KEY_PROG3 */
564 0x070300cb /* KEY_PROG4 */
565 0x0704003e /* KEY_F4 */
566 0x070500f0 /* KEY_UNKNOWN */
567 0x07060160 /* KEY_OK */
568 0x0707006c>; /* KEY_DOWN */
569 linux,input-no-autorepeat;
573 interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
574 &omap4_pmx_core OMAP4_UART2_RX>;
575 pinctrl-names = "default";
576 pinctrl-0 = <&uart2_pins>;
580 interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
581 &omap4_pmx_core OMAP4_UART3_RX>;
582 pinctrl-names = "default";
583 pinctrl-0 = <&uart3_pins>;
587 interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
588 &omap4_pmx_core OMAP4_UART4_RX>;
589 pinctrl-names = "default";
590 pinctrl-0 = <&uart4_pins>;
594 pinctrl-names = "default";
595 pinctrl-0 = <&mcbsp1_pins>;
600 pinctrl-names = "default";
601 pinctrl-0 = <&mcbsp2_pins>;
606 pinctrl-names = "default";
607 pinctrl-0 = <&dmic_pins>;
612 pinctrl-names = "default";
613 pinctrl-0 = <&mcpdm_pins>;
617 &twl_usb_comparator {
618 usb-supply = <&vusb>;
622 interface-type = <1>;
633 vdd-supply = <&vcxio>;
636 dsi1_out_ep: endpoint {
637 remote-endpoint = <&lcd0_in>;
638 lanes = <0 1 2 3 4 5>;
643 compatible = "tpo,taal", "panel-dsi-cm";
646 reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
650 remote-endpoint = <&dsi1_out_ep>;
658 vdd-supply = <&vcxio>;
661 dsi2_out_ep: endpoint {
662 remote-endpoint = <&lcd1_in>;
663 lanes = <0 1 2 3 4 5>;
668 compatible = "tpo,taal", "panel-dsi-cm";
671 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
675 remote-endpoint = <&dsi2_out_ep>;
683 vdda-supply = <&vdac>;
687 remote-endpoint = <&tpd12s015_in>;