arch/arm/boot/dts/omap3-sbc-t3530.dts

   1 /*
   2  * Suppport for CompuLab SBC-T3530 with CM-T3530
   3  */
   4
   5 #include "omap3-cm-t3530.dts"
   6 #include "omap3-sb-t35.dtsi"
   7
   8 / {
   9         model = "CompuLab SBC-T3530 with CM-T3530";
  10         compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
  11
  12         aliases {
  13                 display0 = &dvi0;
  14                 display1 = &tv0;
  15         };
  16 };
  17
  18 &omap3_pmx_core {
  19         pinctrl-names = "default";
  20         pinctrl-0 = <&sb_t35_usb_hub_pins>;
  21
  22         sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
  23                 pinctrl-single,pins = <
  24                         OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
  25                 >;
  26         };
  27 };
  28
  29 /*
  30  * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
  31  * SB-T35 baseboard respectively.
  32  * This setting includes both chips in SBC-T3530 board device tree.
  33  */
  34 &gpmc {
  35         ranges = <5 0 0x2c000000 0x01000000>,
  36                  <4 0 0x2d000000 0x01000000>;
  37 };
  38
  39 &mmc1 {
  40         cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
  41 };
  42
  43 &dss {
  44         port {
  45                 dpi_out: endpoint {
  46                         remote-endpoint = <&tfp410_in>;
  47                         data-lines = <24>;
  48                 };
  49         };
  50 };
  51