arch/arm/boot/dts/omap3-n900.dts

   1 /*
   2  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
   3  * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 (or later) as
   7  * published by the Free Software Foundation.
   8  */
   9
  10 /dts-v1/;
  11
  12 #include "omap34xx-hs.dtsi"
  13 #include <dt-bindings/input/input.h>
  14
  15 / {
  16         model = "Nokia N900";
  17         compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
  18
  19         aliases {
  20                 i2c0;
  21                 i2c1 = &i2c1;
  22                 i2c2 = &i2c2;
  23                 i2c3 = &i2c3;
  24         };
  25
  26         cpus {
  27                 cpu@0 {
  28                         cpu0-supply = <&vcc>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34                 heartbeat {
  35                         label = "debug::sleep";
  36                         gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
  37                         linux,default-trigger = "default-on";
  38                         pinctrl-names = "default";
  39                         pinctrl-0 = <&debug_leds>;
  40                 };
  41         };
  42
  43         memory {
  44                 device_type = "memory";
  45                 reg = <0x80000000 0x10000000>; /* 256 MB */
  46         };
  47
  48         gpio_keys {
  49                 compatible = "gpio-keys";
  50
  51                 camera_lens_cover {
  52                         label = "Camera Lens Cover";
  53                         gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
  54                         linux,input-type = <5>; /* EV_SW */
  55                         linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
  56                         gpio-key,wakeup;
  57                 };
  58
  59                 camera_focus {
  60                         label = "Camera Focus";
  61                         gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
  62                         linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
  63                         gpio-key,wakeup;
  64                 };
  65
  66                 camera_capture {
  67                         label = "Camera Capture";
  68                         gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
  69                         linux,code = <0xd4>; /* KEY_CAMERA */
  70                         gpio-key,wakeup;
  71                 };
  72
  73                 lock_button {
  74                         label = "Lock Button";
  75                         gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
  76                         linux,code = <0x98>; /* KEY_SCREENLOCK */
  77                         gpio-key,wakeup;
  78                 };
  79
  80                 keypad_slide {
  81                         label = "Keypad Slide";
  82                         gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
  83                         linux,input-type = <5>; /* EV_SW */
  84                         linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
  85                         gpio-key,wakeup;
  86                 };
  87
  88                 proximity_sensor {
  89                         label = "Proximity Sensor";
  90                         gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
  91                         linux,input-type = <5>; /* EV_SW */
  92                         linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
  93                 };
  94         };
  95
  96         isp1704: isp1704 {
  97                 compatible = "nxp,isp1704";
  98                 nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
  99                 usb-phy = <&usb2_phy>;
 100         };
 101
 102         tv: connector {
 103                 compatible = "composite-video-connector";
 104                 label = "tv";
 105
 106                 port {
 107                         tv_connector_in: endpoint {
 108                                 remote-endpoint = <&venc_out>;
 109                         };
 110                 };
 111         };
 112
 113         sound: n900-audio {
 114                 compatible = "nokia,n900-audio";
 115
 116                 nokia,cpu-dai = <&mcbsp2>;
 117                 nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
 118                 nokia,headphone-amplifier = <&tpa6130a2>;
 119
 120                 tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
 121                 jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
 122                 eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
 123                 speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
 124         };
 125
 126         battery: n900-battery {
 127                 compatible = "nokia,n900-battery";
 128                 io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
 129                 io-channel-names = "temp", "bsi", "vbat";
 130         };
 131 };
 132
 133 &omap3_pmx_core {
 134         pinctrl-names = "default";
 135
 136         uart2_pins: pinmux_uart2_pins {
 137                 pinctrl-single,pins = <
 138                         0x14a (PIN_INPUT | MUX_MODE0)           /* uart2_rx */
 139                         0x148 (PIN_OUTPUT | MUX_MODE0)          /* uart2_tx */
 140                 >;
 141         };
 142
 143         uart3_pins: pinmux_uart3_pins {
 144                 pinctrl-single,pins = <
 145                         0x16e (PIN_INPUT | MUX_MODE0)           /* uart3_rx */
 146                         0x170 (PIN_OUTPUT | MUX_MODE0)          /* uart3_tx */
 147                 >;
 148         };
 149
 150         ethernet_pins: pinmux_ethernet_pins {
 151                 pinctrl-single,pins = <
 152                         OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)       /* gpmc_ncs3.gpio_54 */
 153                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)               /* dss_data16.gpio_86 */
 154                         OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)               /* uart3_rts_sd.gpio_164 */
 155                 >;
 156         };
 157
 158         gpmc_pins: pinmux_gpmc_pins {
 159                 pinctrl-single,pins = <
 160
 161                         /* address lines */
 162                         OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
 163                         OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
 164                         OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 165
 166                         /* data lines, gpmc_d0..d7 not muxable according to TRM */
 167                         OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
 168                         OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
 169                         OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
 170                         OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
 171                         OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
 172                         OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
 173                         OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
 174                         OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 175
 176                         /*
 177                          * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 178                          * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 179                          */
 180                         OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
 181                         OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
 182                 >;
 183         };
 184
 185         i2c1_pins: pinmux_i2c1_pins {
 186                 pinctrl-single,pins = <
 187                         0x18a (PIN_INPUT | MUX_MODE0)           /* i2c1_scl */
 188                         0x18c (PIN_INPUT | MUX_MODE0)           /* i2c1_sda */
 189                 >;
 190         };
 191
 192         i2c2_pins: pinmux_i2c2_pins {
 193                 pinctrl-single,pins = <
 194                         0x18e (PIN_INPUT | MUX_MODE0)           /* i2c2_scl */
 195                         0x190 (PIN_INPUT | MUX_MODE0)           /* i2c2_sda */
 196                 >;
 197         };
 198
 199         i2c3_pins: pinmux_i2c3_pins {
 200                 pinctrl-single,pins = <
 201                         0x192 (PIN_INPUT | MUX_MODE0)           /* i2c3_scl */
 202                         0x194 (PIN_INPUT | MUX_MODE0)           /* i2c3_sda */
 203                 >;
 204         };
 205
 206         debug_leds: pinmux_debug_led_pins {
 207                 pinctrl-single,pins = <
 208                         OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)       /* mcbsp1_clkx.gpio_162 */
 209                 >;
 210         };
 211
 212         mcspi4_pins: pinmux_mcspi4_pins {
 213                 pinctrl-single,pins = <
 214                         0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
 215                         0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
 216                         0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
 217                         0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 218                 >;
 219         };
 220
 221         mmc1_pins: pinmux_mmc1_pins {
 222                 pinctrl-single,pins = <
 223                         0x114 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_clk */
 224                         0x116 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_cmd */
 225                         0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat0 */
 226                         0x11a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat1 */
 227                         0x11c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat2 */
 228                         0x11e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat3 */
 229                 >;
 230         };
 231
 232         mmc2_pins: pinmux_mmc2_pins {
 233                 pinctrl-single,pins = <
 234                         0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk */
 235                         0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd */
 236                         0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0 */
 237                         0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1 */
 238                         0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2 */
 239                         0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3 */
 240                         0x134 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat4 */
 241                         0x136 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat5 */
 242                         0x138 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat6 */
 243                         0x13a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat7 */
 244                 >;
 245         };
 246
 247         acx565akm_pins: pinmux_acx565akm_pins {
 248                 pinctrl-single,pins = <
 249                         0x0d4 (PIN_OUTPUT | MUX_MODE4)          /* RX51_LCD_RESET_GPIO */
 250                 >;
 251         };
 252
 253         dss_sdi_pins: pinmux_dss_sdi_pins {
 254                 pinctrl-single,pins = <
 255                         0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
 256                         0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
 257                         0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
 258                         0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
 259
 260                         0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
 261                         0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
 262                 >;
 263         };
 264
 265         wl1251_pins: pinmux_wl1251 {
 266                 pinctrl-single,pins = <
 267                         0x0ce (PIN_OUTPUT | MUX_MODE4)          /* gpio 87 => wl1251 enable */
 268                         0x05a (PIN_INPUT | MUX_MODE4)           /* gpio 42 => wl1251 irq */
 269                 >;
 270         };
 271
 272         ssi_pins: pinmux_ssi {
 273                 pinctrl-single,pins = <
 274                         0x150 (PIN_INPUT_PULLUP | MUX_MODE1)    /* ssi1_rdy_tx */
 275                         0x14e (PIN_OUTPUT | MUX_MODE1)          /* ssi1_flag_tx */
 276                         0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
 277                         0x14c (PIN_OUTPUT | MUX_MODE1)          /* ssi1_dat_tx */
 278                         0x154 (PIN_INPUT | MUX_MODE1)           /* ssi1_dat_rx */
 279                         0x156 (PIN_INPUT | MUX_MODE1)           /* ssi1_flag_rx */
 280                         0x158 (PIN_OUTPUT | MUX_MODE1)          /* ssi1_rdy_rx */
 281                         0x15a (PIN_OUTPUT | MUX_MODE1)          /* ssi1_wake */
 282                 >;
 283         };
 284
 285         modem_pins: pinmux_modem {
 286                 pinctrl-single,pins = <
 287                         0x0ac (PIN_OUTPUT | MUX_MODE4)          /* gpio 70 => cmt_apeslpx */
 288                         0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
 289                         0x0b2 (PIN_OUTPUT | MUX_MODE4)          /* gpio 73 => cmt_rst_rq */
 290                         0x0b4 (PIN_OUTPUT | MUX_MODE4)          /* gpio 74 => cmt_en */
 291                         0x0b6 (PIN_OUTPUT | MUX_MODE4)          /* gpio 75 => cmt_rst */
 292                         0x15e (PIN_OUTPUT | MUX_MODE4)          /* gpio 157 => cmt_bsi */
 293                 >;
 294         };
 295 };
 296
 297 &i2c1 {
 298         pinctrl-names = "default";
 299         pinctrl-0 = <&i2c1_pins>;
 300
 301         clock-frequency = <2200000>;
 302
 303         twl: twl@48 {
 304                 reg = <0x48>;
 305                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 306                 interrupt-parent = <&intc>;
 307         };
 308 };
 309
 310 #include "twl4030.dtsi"
 311 #include "twl4030_omap3.dtsi"
 312
 313 &vaux1 {
 314         regulator-name = "V28";
 315         regulator-min-microvolt = <2800000>;
 316         regulator-max-microvolt = <2800000>;
 317         regulator-always-on; /* due to battery cover sensor */
 318 };
 319
 320 &vaux2 {
 321         regulator-name = "VCSI";
 322         regulator-min-microvolt = <1800000>;
 323         regulator-max-microvolt = <1800000>;
 324 };
 325
 326 &vaux3 {
 327         regulator-name = "VMMC2_30";
 328         regulator-min-microvolt = <2800000>;
 329         regulator-max-microvolt = <3000000>;
 330 };
 331
 332 &vaux4 {
 333         regulator-name = "VCAM_ANA_28";
 334         regulator-min-microvolt = <2800000>;
 335         regulator-max-microvolt = <2800000>;
 336 };
 337
 338 &vmmc1 {
 339         regulator-name = "VMMC1";
 340         regulator-min-microvolt = <1850000>;
 341         regulator-max-microvolt = <3150000>;
 342 };
 343
 344 &vmmc2 {
 345         regulator-name = "V28_A";
 346         regulator-min-microvolt = <2800000>;
 347         regulator-max-microvolt = <3000000>;
 348         regulator-always-on; /* due VIO leak to AIC34 VDDs */
 349 };
 350
 351 &vpll1 {
 352         regulator-name = "VPLL";
 353         regulator-min-microvolt = <1800000>;
 354         regulator-max-microvolt = <1800000>;
 355         regulator-always-on;
 356 };
 357
 358 &vpll2 {
 359         regulator-name = "VSDI_CSI";
 360         regulator-min-microvolt = <1800000>;
 361         regulator-max-microvolt = <1800000>;
 362         regulator-always-on;
 363 };
 364
 365 &vsim {
 366         regulator-name = "VMMC2_IO_18";
 367         regulator-min-microvolt = <1800000>;
 368         regulator-max-microvolt = <1800000>;
 369 };
 370
 371 &vio {
 372         regulator-name = "VIO";
 373         regulator-min-microvolt = <1800000>;
 374         regulator-max-microvolt = <1800000>;
 375 };
 376
 377 &vintana1 {
 378         regulator-name = "VINTANA1";
 379         /* fixed to 1500000 */
 380         regulator-always-on;
 381 };
 382
 383 &vintana2 {
 384         regulator-name = "VINTANA2";
 385         regulator-min-microvolt = <2750000>;
 386         regulator-max-microvolt = <2750000>;
 387         regulator-always-on;
 388 };
 389
 390 &vintdig {
 391         regulator-name = "VINTDIG";
 392         /* fixed to 1500000 */
 393         regulator-always-on;
 394 };
 395
 396 &twl {
 397         twl_audio: audio {
 398                 compatible = "ti,twl4030-audio";
 399                 ti,enable-vibra = <1>;
 400         };
 401
 402         twl_power: power {
 403                 compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 404                 ti,use_poweroff;
 405         };
 406 };
 407
 408 &twl_keypad {
 409         linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
 410                          MATRIX_KEY(0x00, 0x01, KEY_O)
 411                          MATRIX_KEY(0x00, 0x02, KEY_P)
 412                          MATRIX_KEY(0x00, 0x03, KEY_COMMA)
 413                          MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
 414                          MATRIX_KEY(0x00, 0x06, KEY_A)
 415                          MATRIX_KEY(0x00, 0x07, KEY_S)
 416
 417                          MATRIX_KEY(0x01, 0x00, KEY_W)
 418                          MATRIX_KEY(0x01, 0x01, KEY_D)
 419                          MATRIX_KEY(0x01, 0x02, KEY_F)
 420                          MATRIX_KEY(0x01, 0x03, KEY_G)
 421                          MATRIX_KEY(0x01, 0x04, KEY_H)
 422                          MATRIX_KEY(0x01, 0x05, KEY_J)
 423                          MATRIX_KEY(0x01, 0x06, KEY_K)
 424                          MATRIX_KEY(0x01, 0x07, KEY_L)
 425
 426                          MATRIX_KEY(0x02, 0x00, KEY_E)
 427                          MATRIX_KEY(0x02, 0x01, KEY_DOT)
 428                          MATRIX_KEY(0x02, 0x02, KEY_UP)
 429                          MATRIX_KEY(0x02, 0x03, KEY_ENTER)
 430                          MATRIX_KEY(0x02, 0x05, KEY_Z)
 431                          MATRIX_KEY(0x02, 0x06, KEY_X)
 432                          MATRIX_KEY(0x02, 0x07, KEY_C)
 433                          MATRIX_KEY(0x02, 0x08, KEY_F9)
 434
 435                          MATRIX_KEY(0x03, 0x00, KEY_R)
 436                          MATRIX_KEY(0x03, 0x01, KEY_V)
 437                          MATRIX_KEY(0x03, 0x02, KEY_B)
 438                          MATRIX_KEY(0x03, 0x03, KEY_N)
 439                          MATRIX_KEY(0x03, 0x04, KEY_M)
 440                          MATRIX_KEY(0x03, 0x05, KEY_SPACE)
 441                          MATRIX_KEY(0x03, 0x06, KEY_SPACE)
 442                          MATRIX_KEY(0x03, 0x07, KEY_LEFT)
 443
 444                          MATRIX_KEY(0x04, 0x00, KEY_T)
 445                          MATRIX_KEY(0x04, 0x01, KEY_DOWN)
 446                          MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
 447                          MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
 448                          MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
 449                          MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
 450                          MATRIX_KEY(0x04, 0x08, KEY_F10)
 451
 452                          MATRIX_KEY(0x05, 0x00, KEY_Y)
 453                          MATRIX_KEY(0x05, 0x08, KEY_F11)
 454
 455                          MATRIX_KEY(0x06, 0x00, KEY_U)
 456
 457                          MATRIX_KEY(0x07, 0x00, KEY_I)
 458                          MATRIX_KEY(0x07, 0x01, KEY_F7)
 459                          MATRIX_KEY(0x07, 0x02, KEY_F8)
 460                          >;
 461 };
 462
 463 &twl_gpio {
 464         ti,pullups      = <0x0>;
 465         ti,pulldowns    = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
 466 };
 467
 468 &i2c2 {
 469         pinctrl-names = "default";
 470         pinctrl-0 = <&i2c2_pins>;
 471
 472         clock-frequency = <100000>;
 473
 474         tlv320aic3x: tlv320aic3x@18 {
 475                 compatible = "ti,tlv320aic3x";
 476                 reg = <0x18>;
 477                 gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 478                 ai3x-gpio-func = <
 479                         0 /* AIC3X_GPIO1_FUNC_DISABLED */
 480                         5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
 481                 >;
 482
 483                 AVDD-supply = <&vmmc2>;
 484                 DRVDD-supply = <&vmmc2>;
 485                 IOVDD-supply = <&vio>;
 486                 DVDD-supply = <&vio>;
 487         };
 488
 489         tlv320aic3x_aux: tlv320aic3x@19 {
 490                 compatible = "ti,tlv320aic3x";
 491                 reg = <0x19>;
 492                 gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
 493
 494                 AVDD-supply = <&vmmc2>;
 495                 DRVDD-supply = <&vmmc2>;
 496                 IOVDD-supply = <&vio>;
 497                 DVDD-supply = <&vio>;
 498         };
 499
 500         tsl2563: tsl2563@29 {
 501                 compatible = "amstaos,tsl2563";
 502                 reg = <0x29>;
 503
 504                 amstaos,cover-comp-gain = <16>;
 505         };
 506
 507         lp5523: lp5523@32 {
 508                 compatible = "national,lp5523";
 509                 reg = <0x32>;
 510                 clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 511                 enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 512
 513                 chan0 {
 514                         chan-name = "lp5523:kb1";
 515                         led-cur = /bits/ 8 <50>;
 516                         max-cur = /bits/ 8 <100>;
 517                 };
 518
 519                 chan1 {
 520                         chan-name = "lp5523:kb2";
 521                         led-cur = /bits/ 8 <50>;
 522                         max-cur = /bits/ 8 <100>;
 523                 };
 524
 525                 chan2 {
 526                         chan-name = "lp5523:kb3";
 527                         led-cur = /bits/ 8 <50>;
 528                         max-cur = /bits/ 8 <100>;
 529                 };
 530
 531                 chan3 {
 532                         chan-name = "lp5523:kb4";
 533                         led-cur = /bits/ 8 <50>;
 534                         max-cur = /bits/ 8 <100>;
 535                 };
 536
 537                 chan4 {
 538                         chan-name = "lp5523:b";
 539                         led-cur = /bits/ 8 <50>;
 540                         max-cur = /bits/ 8 <100>;
 541                 };
 542
 543                 chan5 {
 544                         chan-name = "lp5523:g";
 545                         led-cur = /bits/ 8 <50>;
 546                         max-cur = /bits/ 8 <100>;
 547                 };
 548
 549                 chan6 {
 550                         chan-name = "lp5523:r";
 551                         led-cur = /bits/ 8 <50>;
 552                         max-cur = /bits/ 8 <100>;
 553                 };
 554
 555                 chan7 {
 556                         chan-name = "lp5523:kb5";
 557                         led-cur = /bits/ 8 <50>;
 558                         max-cur = /bits/ 8 <100>;
 559                 };
 560
 561                 chan8 {
 562                         chan-name = "lp5523:kb6";
 563                         led-cur = /bits/ 8 <50>;
 564                         max-cur = /bits/ 8 <100>;
 565                 };
 566         };
 567
 568         bq27200: bq27200@55 {
 569                 compatible = "ti,bq27200";
 570                 reg = <0x55>;
 571         };
 572
 573         tpa6130a2: tpa6130a2@60 {
 574                 compatible = "ti,tpa6130a2";
 575                 reg = <0x60>;
 576
 577                 Vdd-supply = <&vmmc2>;
 578
 579                 power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
 580         };
 581
 582         si4713: si4713@63 {
 583                 compatible = "silabs,si4713";
 584                 reg = <0x63>;
 585
 586                 interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
 587                 reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
 588                 vio-supply = <&vio>;
 589                 vdd-supply = <&vaux1>;
 590         };
 591
 592         bq24150a: bq24150a@6b {
 593                 compatible = "ti,bq24150a";
 594                 reg = <0x6b>;
 595
 596                 ti,current-limit = <100>;
 597                 ti,weak-battery-voltage = <3400>;
 598                 ti,battery-regulation-voltage = <4200>;
 599                 ti,charge-current = <650>;
 600                 ti,termination-current = <100>;
 601                 ti,resistor-sense = <68>;
 602
 603                 ti,usb-charger-detection = <&isp1704>;
 604         };
 605 };
 606
 607 &i2c3 {
 608         pinctrl-names = "default";
 609         pinctrl-0 = <&i2c3_pins>;
 610
 611         clock-frequency = <400000>;
 612
 613         lis302dl: lis3lv02d@1d {
 614                 compatible = "st,lis3lv02d";
 615                 reg = <0x1d>;
 616
 617                 Vdd-supply = <&vaux1>;
 618                 Vdd_IO-supply = <&vio>;
 619
 620                 interrupt-parent = <&gpio6>;
 621                 interrupts = <21 20>; /* 181 and 180 */
 622
 623                 /* click flags */
 624                 st,click-single-x;
 625                 st,click-single-y;
 626                 st,click-single-z;
 627
 628                 /* Limits are 0.5g * value */
 629                 st,click-threshold-x = <8>;
 630                 st,click-threshold-y = <8>;
 631                 st,click-threshold-z = <10>;
 632
 633                 /* Click must be longer than time limit */
 634                 st,click-time-limit = <9>;
 635
 636                 /* Kind of debounce filter */
 637                 st,click-latency = <50>;
 638
 639                 /* Interrupt line 2 for click detection */
 640                 st,irq2-click;
 641
 642                 st,wakeup-x-hi;
 643                 st,wakeup-y-hi;
 644                 st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
 645
 646                 st,wakeup2-z-hi;
 647                 st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
 648
 649                 st,hipass1-disable;
 650                 st,hipass2-disable;
 651
 652                 st,axis-x = <1>;    /* LIS3_DEV_X */
 653                 st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
 654                 st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
 655
 656                 st,min-limit-x = <(-32)>;
 657                 st,min-limit-y = <3>;
 658                 st,min-limit-z = <3>;
 659
 660                 st,max-limit-x = <(-3)>;
 661                 st,max-limit-y = <32>;
 662                 st,max-limit-z = <32>;
 663         };
 664 };
 665
 666 &mmc1 {
 667         pinctrl-names = "default";
 668         pinctrl-0 = <&mmc1_pins>;
 669         vmmc-supply = <&vmmc1>;
 670         bus-width = <4>;
 671         cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 672 };
 673
 674 /* most boards use vaux3, only some old versions use vmmc2 instead */
 675 &mmc2 {
 676         pinctrl-names = "default";
 677         pinctrl-0 = <&mmc2_pins>;
 678         vmmc-supply = <&vaux3>;
 679         vmmc_aux-supply = <&vsim>;
 680         bus-width = <8>;
 681         non-removable;
 682 };
 683
 684 &mmc3 {
 685         status = "disabled";
 686 };
 687
 688 &gpmc {
 689         ranges = <0 0 0x01000000 0x01000000>,   /* 16 MB for OneNAND */
 690                  <1 0 0x02000000 0x01000000>;   /* 16 MB for smc91c96 */
 691         pinctrl-names = "default";
 692         pinctrl-0 = <&gpmc_pins>;
 693
 694         /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
 695         onenand@0,0 {
 696                 #address-cells = <1>;
 697                 #size-cells = <1>;
 698                 reg = <0 0 0x20000>;    /* CS0, offset 0, IO size 128K */
 699
 700                 gpmc,sync-read;
 701                 gpmc,sync-write;
 702                 gpmc,burst-length = <16>;
 703                 gpmc,burst-read;
 704                 gpmc,burst-wrap;
 705                 gpmc,burst-write;
 706                 gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
 707                 gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
 708                 gpmc,cs-on-ns = <0>;
 709                 gpmc,cs-rd-off-ns = <87>;
 710                 gpmc,cs-wr-off-ns = <87>;
 711                 gpmc,adv-on-ns = <0>;
 712                 gpmc,adv-rd-off-ns = <10>;
 713                 gpmc,adv-wr-off-ns = <10>;
 714                 gpmc,oe-on-ns = <15>;
 715                 gpmc,oe-off-ns = <87>;
 716                 gpmc,we-on-ns = <0>;
 717                 gpmc,we-off-ns = <87>;
 718                 gpmc,rd-cycle-ns = <112>;
 719                 gpmc,wr-cycle-ns = <112>;
 720                 gpmc,access-ns = <81>;
 721                 gpmc,page-burst-access-ns = <15>;
 722                 gpmc,bus-turnaround-ns = <0>;
 723                 gpmc,cycle2cycle-delay-ns = <0>;
 724                 gpmc,wait-monitoring-ns = <0>;
 725                 gpmc,clk-activation-ns = <5>;
 726                 gpmc,wr-data-mux-bus-ns = <30>;
 727                 gpmc,wr-access-ns = <81>;
 728                 gpmc,sync-clk-ps = <15000>;
 729
 730                 /*
 731                  * MTD partition table corresponding to Nokia's
 732                  * Maemo 5 (Fremantle) release.
 733                  */
 734                 partition@0 {
 735                         label = "bootloader";
 736                         reg = <0x00000000 0x00020000>;
 737                         read-only;
 738                 };
 739                 partition@1 {
 740                         label = "config";
 741                         reg = <0x00020000 0x00060000>;
 742                 };
 743                 partition@2 {
 744                         label = "log";
 745                         reg = <0x00080000 0x00040000>;
 746                 };
 747                 partition@3 {
 748                         label = "kernel";
 749                         reg = <0x000c0000 0x00200000>;
 750                 };
 751                 partition@4 {
 752                         label = "initfs";
 753                         reg = <0x002c0000 0x00200000>;
 754                 };
 755                 partition@5 {
 756                         label = "rootfs";
 757                         reg = <0x004c0000 0x0fb40000>;
 758                 };
 759         };
 760
 761         /* Ethernet is on some early development boards and qemu */
 762         ethernet@gpmc {
 763                 compatible = "smsc,lan91c94";
 764                 interrupt-parent = <&gpio2>;
 765                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;  /* gpio54 */
 766                 reg = <1 0 0xf>;                /* 16 byte IO range */
 767                 bank-width = <2>;
 768                 pinctrl-names = "default";
 769                 pinctrl-0 = <&ethernet_pins>;
 770                 power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;     /* gpio86 */
 771                 reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;      /* gpio164 */
 772                 gpmc,device-width = <2>;
 773                 gpmc,sync-clk-ps = <0>;
 774                 gpmc,cs-on-ns = <0>;
 775                 gpmc,cs-rd-off-ns = <48>;
 776                 gpmc,cs-wr-off-ns = <24>;
 777                 gpmc,adv-on-ns = <0>;
 778                 gpmc,adv-rd-off-ns = <0>;
 779                 gpmc,adv-wr-off-ns = <0>;
 780                 gpmc,we-on-ns = <12>;
 781                 gpmc,we-off-ns = <18>;
 782                 gpmc,oe-on-ns = <12>;
 783                 gpmc,oe-off-ns = <48>;
 784                 gpmc,page-burst-access-ns = <0>;
 785                 gpmc,access-ns = <42>;
 786                 gpmc,rd-cycle-ns = <180>;
 787                 gpmc,wr-cycle-ns = <180>;
 788                 gpmc,bus-turnaround-ns = <0>;
 789                 gpmc,cycle2cycle-delay-ns = <0>;
 790                 gpmc,wait-monitoring-ns = <0>;
 791                 gpmc,clk-activation-ns = <0>;
 792                 gpmc,wr-access-ns = <0>;
 793                 gpmc,wr-data-mux-bus-ns = <12>;
 794         };
 795 };
 796
 797 &mcspi1 {
 798         /*
 799          * For some reason, touchscreen is necessary for screen to work at
 800          * all on real hw. It works well without it on emulator.
 801          *
 802          * Also... order in the device tree actually matters here.
 803          */
 804         tsc2005@0 {
 805                 compatible = "ti,tsc2005";
 806                 spi-max-frequency = <6000000>;
 807                 reg = <0>;
 808
 809                 vio-supply = <&vio>;
 810
 811                 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
 812                 interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
 813
 814                 touchscreen-fuzz-x = <4>;
 815                 touchscreen-fuzz-y = <7>;
 816                 touchscreen-fuzz-pressure = <2>;
 817                 touchscreen-max-x = <4096>;
 818                 touchscreen-max-y = <4096>;
 819                 touchscreen-max-pressure = <2048>;
 820
 821                 ti,x-plate-ohms = <280>;
 822                 ti,esd-recovery-timeout-ms = <8000>;
 823         };
 824
 825         acx565akm@2 {
 826                 compatible = "sony,acx565akm";
 827                 spi-max-frequency = <6000000>;
 828                 reg = <2>;
 829
 830                 pinctrl-names = "default";
 831                 pinctrl-0 = <&acx565akm_pins>;
 832
 833                 label = "lcd";
 834                 reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
 835
 836                 port {
 837                         lcd_in: endpoint {
 838                                 remote-endpoint = <&sdi_out>;
 839                         };
 840                 };
 841         };
 842 };
 843
 844 &mcspi4 {
 845         pinctrl-names = "default";
 846         pinctrl-0 = <&mcspi4_pins>;
 847
 848         wl1251@0 {
 849                 pinctrl-names = "default";
 850                 pinctrl-0 = <&wl1251_pins>;
 851
 852                 vio-supply = <&vio>;
 853
 854                 compatible = "ti,wl1251";
 855                 reg = <0>;
 856                 spi-max-frequency = <48000000>;
 857
 858                 spi-cpol;
 859                 spi-cpha;
 860
 861                 ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
 862
 863                 interrupt-parent = <&gpio2>;
 864                 interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
 865         };
 866 };
 867
 868 &usb_otg_hs {
 869         interface-type = <0>;
 870         usb-phy = <&usb2_phy>;
 871         phys = <&usb2_phy>;
 872         phy-names = "usb2-phy";
 873         mode = <2>;
 874         power = <50>;
 875 };
 876
 877 &uart1 {
 878         status = "disabled";
 879 };
 880
 881 &uart2 {
 882         interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 883         pinctrl-names = "default";
 884         pinctrl-0 = <&uart2_pins>;
 885 };
 886
 887 &uart3 {
 888         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 889         pinctrl-names = "default";
 890         pinctrl-0 = <&uart3_pins>;
 891 };
 892
 893 &dss {
 894         status = "ok";
 895
 896         pinctrl-names = "default";
 897         pinctrl-0 = <&dss_sdi_pins>;
 898
 899         vdds_sdi-supply = <&vaux1>;
 900
 901         ports {
 902                 #address-cells = <1>;
 903                 #size-cells = <0>;
 904
 905                 port@1 {
 906                         reg = <1>;
 907
 908                         sdi_out: endpoint {
 909                                 remote-endpoint = <&lcd_in>;
 910                                 datapairs = <2>;
 911                         };
 912                 };
 913         };
 914 };
 915
 916 &venc {
 917         status = "ok";
 918
 919         vdda-supply = <&vdac>;
 920
 921         port {
 922                 venc_out: endpoint {
 923                         remote-endpoint = <&tv_connector_in>;
 924                         ti,channels = <1>;
 925                 };
 926         };
 927 };
 928
 929 &mcbsp2 {
 930         status = "ok";
 931 };
 932
 933 &ssi_port1 {
 934         pinctrl-names = "default";
 935         pinctrl-0 = <&ssi_pins>;
 936
 937         ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
 938
 939         modem: hsi-client {
 940                 compatible = "nokia,n900-modem";
 941
 942                 pinctrl-names = "default";
 943                 pinctrl-0 = <&modem_pins>;
 944
 945                 hsi-channel-ids = <0>, <1>, <2>, <3>;
 946                 hsi-channel-names = "mcsaab-control",
 947                                     "speech-control",
 948                                     "speech-data",
 949                                     "mcsaab-data";
 950                 hsi-speed-kbps = <55000>;
 951                 hsi-mode = "frame";
 952                 hsi-flow = "synchronized";
 953                 hsi-arb-mode = "round-robin";
 954
 955                 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
 956
 957                 gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
 958                         <&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
 959                         <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
 960                         <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
 961                         <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
 962                 gpio-names = "cmt_apeslpx",
 963                              "cmt_rst_rq",
 964                              "cmt_en",
 965                              "cmt_rst",
 966                              "cmt_bsi";
 967         };
 968 };
 969
 970 &ssi_port2 {
 971         status = "disabled";
 972 };