2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "omap34xx.dtsi"
13 model = "TI OMAP3 BeagleBoard";
14 compatible = "ti,omap3-beagle", "ti,omap3";
23 device_type = "memory";
24 reg = <0x80000000 0x10000000>; /* 256 MB */
33 compatible = "gpio-leds";
35 label = "beagleboard::pmu_stat";
36 gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
40 label = "beagleboard::usr0";
41 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
42 linux,default-trigger = "heartbeat";
46 label = "beagleboard::usr1";
47 gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
48 linux,default-trigger = "mmc0";
52 /* HS USB Port 2 Power */
53 hsusb2_power: hsusb2_power_reg {
54 compatible = "regulator-fixed";
55 regulator-name = "hsusb2_vbus";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
58 gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
59 startup-delay-us = <70000>;
62 /* HS USB Host PHY on PORT 2 */
63 hsusb2_phy: hsusb2_phy {
64 compatible = "usb-nop-xceiv";
65 reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
66 vcc-supply = <&hsusb2_power>;
70 compatible = "ti,omap-twl4030";
71 ti,model = "omap3beagle";
74 ti,codec = <&twl_audio>;
78 compatible = "gpio-keys";
82 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
90 compatible = "ti,tfp410";
91 powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
93 pinctrl-names = "default";
94 pinctrl-0 = <&tfp410_pins>;
103 tfp410_in: endpoint@0 {
104 remote-endpoint = <&dpi_out>;
111 tfp410_out: endpoint@0 {
112 remote-endpoint = <&dvi_connector_in>;
119 compatible = "dvi-connector";
124 ddc-i2c-bus = <&i2c3>;
127 dvi_connector_in: endpoint {
128 remote-endpoint = <&tfp410_out>;
134 compatible = "svideo-connector";
138 tv_connector_in: endpoint {
139 remote-endpoint = <&venc_out>;
145 compatible = "arm,coresight-etb10", "arm,primecell";
146 reg = <0x5401b000 0x1000>;
148 clocks = <&emu_src_ck>;
149 clock-names = "apb_pclk";
153 remote-endpoint = <&etm_out>;
159 compatible = "arm,coresight-etm3x", "arm,primecell";
160 reg = <0x54010000 0x1000>;
162 clocks = <&emu_src_ck>;
163 clock-names = "apb_pclk";
166 remote-endpoint = <&etb_in>;
173 gpio1_pins: pinmux_gpio1_pins {
174 pinctrl-single,pins = <
175 0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
181 pinctrl-names = "default";
186 hsusb2_pins: pinmux_hsusb2_pins {
187 pinctrl-single,pins = <
188 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
189 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
190 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
191 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
192 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
193 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
197 uart3_pins: pinmux_uart3_pins {
198 pinctrl-single,pins = <
199 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
200 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
204 tfp410_pins: pinmux_tfp410_pins {
205 pinctrl-single,pins = <
206 0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
210 dss_dpi_pins: pinmux_dss_dpi_pins {
211 pinctrl-single,pins = <
212 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
213 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
214 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
215 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
216 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
217 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
218 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
219 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
220 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
221 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
222 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
223 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
224 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
225 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
226 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
227 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
228 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
229 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
230 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
231 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
232 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
233 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
234 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
235 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
236 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
237 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
238 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
239 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
245 pinctrl-names = "default";
250 hsusb2_2_pins: pinmux_hsusb2_2_pins {
251 pinctrl-single,pins = <
252 OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
253 OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
254 OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
255 OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
256 OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
257 OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
263 clock-frequency = <2600000>;
267 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
268 interrupt-parent = <&intc>;
271 compatible = "ti,twl4030-audio";
278 #include "twl4030.dtsi"
279 #include "twl4030_omap3.dtsi"
282 clock-frequency = <100000>;
286 vmmc-supply = <&vmmc1>;
287 vmmc_aux-supply = <&vsim>;
300 port2-mode = "ehci-phy";
304 phys = <0 &hsusb2_phy>;
309 /* pullups: BIT(1) */
310 ti,pullups = <0x000002>;
313 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
314 * BIT(15), BIT(16), BIT(17)
316 ti,pulldowns = <0x03a1c4>;
320 pinctrl-names = "default";
321 pinctrl-0 = <&uart3_pins>;
322 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&gpio1_pins>;
331 interface-type = <0>;
332 usb-phy = <&usb2_phy>;
334 phy-names = "usb2-phy";
340 regulator-name = "vdd_ehci";
341 regulator-min-microvolt = <1800000>;
342 regulator-max-microvolt = <1800000>;
350 /* Needed to power the DPI pins */
358 pinctrl-names = "default";
359 pinctrl-0 = <&dss_dpi_pins>;
363 remote-endpoint = <&tfp410_in>;
372 vdda-supply = <&vdac>;
376 remote-endpoint = <&tv_connector_in>;