2 * Copyright 2014 Freescale Semiconductor, Inc.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
9 #include <dt-bindings/clock/imx6sx-clock.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include "imx6sx-pinfunc.h"
13 #include "skeleton.dtsi"
56 compatible = "arm,cortex-a9";
59 next-level-cache = <&L2>;
66 fsl,soc-operating-points = <
72 clock-latency = <61036>; /* two CLK32 periods */
73 clocks = <&clks IMX6SX_CLK_ARM>,
74 <&clks IMX6SX_CLK_PLL2_PFD2>,
75 <&clks IMX6SX_CLK_STEP>,
76 <&clks IMX6SX_CLK_PLL1_SW>,
77 <&clks IMX6SX_CLK_PLL1_SYS>;
78 clock-names = "arm", "pll2_pfd2_396m", "step",
79 "pll1_sw", "pll1_sys";
80 arm-supply = <®_arm>;
81 soc-supply = <®_soc>;
85 intc: interrupt-controller@00a01000 {
86 compatible = "arm,cortex-a9-gic";
87 #interrupt-cells = <3>;
89 reg = <0x00a01000 0x1000>,
91 interrupt-parent = <&intc>;
99 compatible = "fixed-clock";
102 clock-frequency = <32768>;
103 clock-output-names = "ckil";
107 compatible = "fixed-clock";
110 clock-frequency = <24000000>;
111 clock-output-names = "osc";
115 compatible = "fixed-clock";
118 clock-frequency = <0>;
119 clock-output-names = "ipp_di0";
123 compatible = "fixed-clock";
126 clock-frequency = <0>;
127 clock-output-names = "ipp_di1";
132 #address-cells = <1>;
134 compatible = "simple-bus";
135 interrupt-parent = <&gpc>;
139 compatible = "arm,cortex-a9-pmu";
140 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
143 ocram: sram@00900000 {
144 compatible = "mmio-sram";
145 reg = <0x00900000 0x20000>;
146 clocks = <&clks IMX6SX_CLK_OCRAM>;
149 L2: l2-cache@00a02000 {
150 compatible = "arm,pl310-cache";
151 reg = <0x00a02000 0x1000>;
152 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
155 arm,tag-latency = <4 2 3>;
156 arm,data-latency = <4 2 3>;
159 dma_apbh: dma-apbh@01804000 {
160 compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
161 reg = <0x01804000 0x2000>;
162 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
163 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
164 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
165 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
166 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
169 clocks = <&clks IMX6SX_CLK_APBH_DMA>;
172 gpmi: gpmi-nand@01806000{
173 compatible = "fsl,imx6sx-gpmi-nand";
174 #address-cells = <1>;
176 reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
177 reg-names = "gpmi-nand", "bch";
178 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
179 interrupt-names = "bch";
180 clocks = <&clks IMX6SX_CLK_GPMI_IO>,
181 <&clks IMX6SX_CLK_GPMI_APB>,
182 <&clks IMX6SX_CLK_GPMI_BCH>,
183 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
184 <&clks IMX6SX_CLK_PER1_BCH>;
185 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
186 "gpmi_bch_apb", "per1_bch";
187 dmas = <&dma_apbh 0>;
192 aips1: aips-bus@02000000 {
193 compatible = "fsl,aips-bus", "simple-bus";
194 #address-cells = <1>;
196 reg = <0x02000000 0x100000>;
200 compatible = "fsl,spba-bus", "simple-bus";
201 #address-cells = <1>;
203 reg = <0x02000000 0x40000>;
206 spdif: spdif@02004000 {
207 compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
208 reg = <0x02004000 0x4000>;
209 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
210 dmas = <&sdma 14 18 0>,
212 dma-names = "rx", "tx";
213 clocks = <&clks IMX6SX_CLK_SPDIF>,
214 <&clks IMX6SX_CLK_OSC>,
215 <&clks IMX6SX_CLK_SPDIF>,
216 <&clks 0>, <&clks 0>, <&clks 0>,
217 <&clks IMX6SX_CLK_IPG>,
218 <&clks 0>, <&clks 0>,
219 <&clks IMX6SX_CLK_SPBA>;
220 clock-names = "core", "rxtx0",
228 ecspi1: ecspi@02008000 {
229 #address-cells = <1>;
231 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
232 reg = <0x02008000 0x4000>;
233 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
234 clocks = <&clks IMX6SX_CLK_ECSPI1>,
235 <&clks IMX6SX_CLK_ECSPI1>;
236 clock-names = "ipg", "per";
240 ecspi2: ecspi@0200c000 {
241 #address-cells = <1>;
243 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
244 reg = <0x0200c000 0x4000>;
245 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
246 clocks = <&clks IMX6SX_CLK_ECSPI2>,
247 <&clks IMX6SX_CLK_ECSPI2>;
248 clock-names = "ipg", "per";
252 ecspi3: ecspi@02010000 {
253 #address-cells = <1>;
255 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
256 reg = <0x02010000 0x4000>;
257 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
258 clocks = <&clks IMX6SX_CLK_ECSPI3>,
259 <&clks IMX6SX_CLK_ECSPI3>;
260 clock-names = "ipg", "per";
264 ecspi4: ecspi@02014000 {
265 #address-cells = <1>;
267 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
268 reg = <0x02014000 0x4000>;
269 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
270 clocks = <&clks IMX6SX_CLK_ECSPI4>,
271 <&clks IMX6SX_CLK_ECSPI4>;
272 clock-names = "ipg", "per";
276 uart1: serial@02020000 {
277 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
278 reg = <0x02020000 0x4000>;
279 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
280 clocks = <&clks IMX6SX_CLK_UART_IPG>,
281 <&clks IMX6SX_CLK_UART_SERIAL>;
282 clock-names = "ipg", "per";
283 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
284 dma-names = "rx", "tx";
288 esai: esai@02024000 {
289 reg = <0x02024000 0x4000>;
290 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
291 clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
292 <&clks IMX6SX_CLK_ESAI_MEM>,
293 <&clks IMX6SX_CLK_ESAI_EXTAL>,
294 <&clks IMX6SX_CLK_ESAI_IPG>,
295 <&clks IMX6SX_CLK_SPBA>;
296 clock-names = "core", "mem", "extal",
302 #sound-dai-cells = <0>;
303 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
304 reg = <0x02028000 0x4000>;
305 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
306 clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
307 <&clks IMX6SX_CLK_SSI1>;
308 clock-names = "ipg", "baud";
309 dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
310 dma-names = "rx", "tx";
311 fsl,fifo-depth = <15>;
316 #sound-dai-cells = <0>;
317 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
318 reg = <0x0202c000 0x4000>;
319 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
320 clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
321 <&clks IMX6SX_CLK_SSI2>;
322 clock-names = "ipg", "baud";
323 dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
324 dma-names = "rx", "tx";
325 fsl,fifo-depth = <15>;
330 #sound-dai-cells = <0>;
331 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
332 reg = <0x02030000 0x4000>;
333 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
334 clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
335 <&clks IMX6SX_CLK_SSI3>;
336 clock-names = "ipg", "baud";
337 dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
338 dma-names = "rx", "tx";
339 fsl,fifo-depth = <15>;
343 asrc: asrc@02034000 {
344 reg = <0x02034000 0x4000>;
345 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
346 clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
347 <&clks IMX6SX_CLK_ASRC_IPG>,
348 <&clks IMX6SX_CLK_SPDIF>,
349 <&clks IMX6SX_CLK_SPBA>;
350 clock-names = "mem", "ipg", "asrck", "dma";
351 dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
352 <&sdma 19 20 1>, <&sdma 20 20 1>,
353 <&sdma 21 20 1>, <&sdma 22 20 1>;
354 dma-names = "rxa", "rxb", "rxc",
361 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
362 reg = <0x02080000 0x4000>;
363 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
364 clocks = <&clks IMX6SX_CLK_PWM1>,
365 <&clks IMX6SX_CLK_PWM1>;
366 clock-names = "ipg", "per";
371 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
372 reg = <0x02084000 0x4000>;
373 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
374 clocks = <&clks IMX6SX_CLK_PWM2>,
375 <&clks IMX6SX_CLK_PWM2>;
376 clock-names = "ipg", "per";
381 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
382 reg = <0x02088000 0x4000>;
383 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
384 clocks = <&clks IMX6SX_CLK_PWM3>,
385 <&clks IMX6SX_CLK_PWM3>;
386 clock-names = "ipg", "per";
391 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
392 reg = <0x0208c000 0x4000>;
393 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
394 clocks = <&clks IMX6SX_CLK_PWM4>,
395 <&clks IMX6SX_CLK_PWM4>;
396 clock-names = "ipg", "per";
400 flexcan1: can@02090000 {
401 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
402 reg = <0x02090000 0x4000>;
403 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
404 clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
405 <&clks IMX6SX_CLK_CAN1_SERIAL>;
406 clock-names = "ipg", "per";
410 flexcan2: can@02094000 {
411 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
412 reg = <0x02094000 0x4000>;
413 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
414 clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
415 <&clks IMX6SX_CLK_CAN2_SERIAL>;
416 clock-names = "ipg", "per";
421 compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
422 reg = <0x02098000 0x4000>;
423 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
424 clocks = <&clks IMX6SX_CLK_GPT_BUS>,
425 <&clks IMX6SX_CLK_GPT_3M>;
426 clock-names = "ipg", "per";
429 gpio1: gpio@0209c000 {
430 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
431 reg = <0x0209c000 0x4000>;
432 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
433 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
436 interrupt-controller;
437 #interrupt-cells = <2>;
440 gpio2: gpio@020a0000 {
441 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
442 reg = <0x020a0000 0x4000>;
443 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
444 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
447 interrupt-controller;
448 #interrupt-cells = <2>;
451 gpio3: gpio@020a4000 {
452 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
453 reg = <0x020a4000 0x4000>;
454 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
455 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
458 interrupt-controller;
459 #interrupt-cells = <2>;
462 gpio4: gpio@020a8000 {
463 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
464 reg = <0x020a8000 0x4000>;
465 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
466 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
469 interrupt-controller;
470 #interrupt-cells = <2>;
473 gpio5: gpio@020ac000 {
474 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
475 reg = <0x020ac000 0x4000>;
476 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
477 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
480 interrupt-controller;
481 #interrupt-cells = <2>;
484 gpio6: gpio@020b0000 {
485 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
486 reg = <0x020b0000 0x4000>;
487 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
488 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
491 interrupt-controller;
492 #interrupt-cells = <2>;
495 gpio7: gpio@020b4000 {
496 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
497 reg = <0x020b4000 0x4000>;
498 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
499 <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
502 interrupt-controller;
503 #interrupt-cells = <2>;
507 compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
508 reg = <0x020b8000 0x4000>;
509 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
510 clocks = <&clks IMX6SX_CLK_DUMMY>;
514 wdog1: wdog@020bc000 {
515 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
516 reg = <0x020bc000 0x4000>;
517 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
518 clocks = <&clks IMX6SX_CLK_DUMMY>;
521 wdog2: wdog@020c0000 {
522 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
523 reg = <0x020c0000 0x4000>;
524 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
525 clocks = <&clks IMX6SX_CLK_DUMMY>;
530 compatible = "fsl,imx6sx-ccm";
531 reg = <0x020c4000 0x4000>;
532 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
533 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
535 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
536 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
539 anatop: anatop@020c8000 {
540 compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
541 "syscon", "simple-bus";
542 reg = <0x020c8000 0x1000>;
543 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
544 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
545 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
548 compatible = "fsl,anatop-regulator";
549 regulator-name = "vdd1p1";
550 regulator-min-microvolt = <800000>;
551 regulator-max-microvolt = <1375000>;
553 anatop-reg-offset = <0x110>;
554 anatop-vol-bit-shift = <8>;
555 anatop-vol-bit-width = <5>;
556 anatop-min-bit-val = <4>;
557 anatop-min-voltage = <800000>;
558 anatop-max-voltage = <1375000>;
562 compatible = "fsl,anatop-regulator";
563 regulator-name = "vdd3p0";
564 regulator-min-microvolt = <2800000>;
565 regulator-max-microvolt = <3150000>;
567 anatop-reg-offset = <0x120>;
568 anatop-vol-bit-shift = <8>;
569 anatop-vol-bit-width = <5>;
570 anatop-min-bit-val = <0>;
571 anatop-min-voltage = <2625000>;
572 anatop-max-voltage = <3400000>;
576 compatible = "fsl,anatop-regulator";
577 regulator-name = "vdd2p5";
578 regulator-min-microvolt = <2100000>;
579 regulator-max-microvolt = <2875000>;
581 anatop-reg-offset = <0x130>;
582 anatop-vol-bit-shift = <8>;
583 anatop-vol-bit-width = <5>;
584 anatop-min-bit-val = <0>;
585 anatop-min-voltage = <2100000>;
586 anatop-max-voltage = <2875000>;
589 reg_arm: regulator-vddcore@140 {
590 compatible = "fsl,anatop-regulator";
591 regulator-name = "vddarm";
592 regulator-min-microvolt = <725000>;
593 regulator-max-microvolt = <1450000>;
595 anatop-reg-offset = <0x140>;
596 anatop-vol-bit-shift = <0>;
597 anatop-vol-bit-width = <5>;
598 anatop-delay-reg-offset = <0x170>;
599 anatop-delay-bit-shift = <24>;
600 anatop-delay-bit-width = <2>;
601 anatop-min-bit-val = <1>;
602 anatop-min-voltage = <725000>;
603 anatop-max-voltage = <1450000>;
606 reg_pcie: regulator-vddpcie@140 {
607 compatible = "fsl,anatop-regulator";
608 regulator-name = "vddpcie";
609 regulator-min-microvolt = <725000>;
610 regulator-max-microvolt = <1450000>;
611 anatop-reg-offset = <0x140>;
612 anatop-vol-bit-shift = <9>;
613 anatop-vol-bit-width = <5>;
614 anatop-delay-reg-offset = <0x170>;
615 anatop-delay-bit-shift = <26>;
616 anatop-delay-bit-width = <2>;
617 anatop-min-bit-val = <1>;
618 anatop-min-voltage = <725000>;
619 anatop-max-voltage = <1450000>;
622 reg_soc: regulator-vddsoc@140 {
623 compatible = "fsl,anatop-regulator";
624 regulator-name = "vddsoc";
625 regulator-min-microvolt = <725000>;
626 regulator-max-microvolt = <1450000>;
628 anatop-reg-offset = <0x140>;
629 anatop-vol-bit-shift = <18>;
630 anatop-vol-bit-width = <5>;
631 anatop-delay-reg-offset = <0x170>;
632 anatop-delay-bit-shift = <28>;
633 anatop-delay-bit-width = <2>;
634 anatop-min-bit-val = <1>;
635 anatop-min-voltage = <725000>;
636 anatop-max-voltage = <1450000>;
641 compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
642 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
643 fsl,tempmon = <&anatop>;
644 fsl,tempmon-data = <&ocotp>;
645 clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
648 usbphy1: usbphy@020c9000 {
649 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
650 reg = <0x020c9000 0x1000>;
651 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
652 clocks = <&clks IMX6SX_CLK_USBPHY1>;
653 fsl,anatop = <&anatop>;
656 usbphy2: usbphy@020ca000 {
657 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
658 reg = <0x020ca000 0x1000>;
659 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
660 clocks = <&clks IMX6SX_CLK_USBPHY2>;
661 fsl,anatop = <&anatop>;
664 snvs: snvs@020cc000 {
665 compatible = "fsl,sec-v4.0-mon", "simple-bus";
666 #address-cells = <1>;
668 ranges = <0 0x020cc000 0x4000>;
671 compatible = "fsl,sec-v4.0-mon-rtc-lp";
673 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
676 snvs_poweroff: snvs-poweroff@38 {
677 compatible = "fsl,sec-v4.0-poweroff";
683 epit1: epit@020d0000 {
684 reg = <0x020d0000 0x4000>;
685 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
688 epit2: epit@020d4000 {
689 reg = <0x020d4000 0x4000>;
690 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
694 compatible = "fsl,imx6sx-src", "fsl,imx51-src";
695 reg = <0x020d8000 0x4000>;
696 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
697 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
702 compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
703 reg = <0x020dc000 0x4000>;
704 interrupt-controller;
705 #interrupt-cells = <3>;
706 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
707 interrupt-parent = <&intc>;
710 iomuxc: iomuxc@020e0000 {
711 compatible = "fsl,imx6sx-iomuxc";
712 reg = <0x020e0000 0x4000>;
715 gpr: iomuxc-gpr@020e4000 {
716 compatible = "fsl,imx6sx-iomuxc-gpr",
717 "fsl,imx6q-iomuxc-gpr", "syscon";
718 reg = <0x020e4000 0x4000>;
721 sdma: sdma@020ec000 {
722 compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
723 reg = <0x020ec000 0x4000>;
724 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
725 clocks = <&clks IMX6SX_CLK_SDMA>,
726 <&clks IMX6SX_CLK_SDMA>;
727 clock-names = "ipg", "ahb";
729 /* imx6sx reuses imx6q sdma firmware */
730 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
734 aips2: aips-bus@02100000 {
735 compatible = "fsl,aips-bus", "simple-bus";
736 #address-cells = <1>;
738 reg = <0x02100000 0x100000>;
741 usbotg1: usb@02184000 {
742 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
743 reg = <0x02184000 0x200>;
744 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
745 clocks = <&clks IMX6SX_CLK_USBOH3>;
746 fsl,usbphy = <&usbphy1>;
747 fsl,usbmisc = <&usbmisc 0>;
748 fsl,anatop = <&anatop>;
752 usbotg2: usb@02184200 {
753 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
754 reg = <0x02184200 0x200>;
755 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
756 clocks = <&clks IMX6SX_CLK_USBOH3>;
757 fsl,usbphy = <&usbphy2>;
758 fsl,usbmisc = <&usbmisc 1>;
763 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
764 reg = <0x02184400 0x200>;
765 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
766 clocks = <&clks IMX6SX_CLK_USBOH3>;
767 fsl,usbmisc = <&usbmisc 2>;
769 fsl,anatop = <&anatop>;
773 usbmisc: usbmisc@02184800 {
775 compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
776 reg = <0x02184800 0x200>;
777 clocks = <&clks IMX6SX_CLK_USBOH3>;
780 fec1: ethernet@02188000 {
781 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
782 reg = <0x02188000 0x4000>;
783 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
784 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
785 clocks = <&clks IMX6SX_CLK_ENET>,
786 <&clks IMX6SX_CLK_ENET_AHB>,
787 <&clks IMX6SX_CLK_ENET_PTP>,
788 <&clks IMX6SX_CLK_ENET_REF>,
789 <&clks IMX6SX_CLK_ENET_PTP>;
790 clock-names = "ipg", "ahb", "ptp",
791 "enet_clk_ref", "enet_out";
792 fsl,num-tx-queues=<3>;
793 fsl,num-rx-queues=<3>;
798 reg = <0x0218c000 0x4000>;
799 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
800 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
801 <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
802 clocks = <&clks IMX6SX_CLK_MLB>;
806 usdhc1: usdhc@02190000 {
807 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
808 reg = <0x02190000 0x4000>;
809 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
810 clocks = <&clks IMX6SX_CLK_USDHC1>,
811 <&clks IMX6SX_CLK_USDHC1>,
812 <&clks IMX6SX_CLK_USDHC1>;
813 clock-names = "ipg", "ahb", "per";
818 usdhc2: usdhc@02194000 {
819 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
820 reg = <0x02194000 0x4000>;
821 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
822 clocks = <&clks IMX6SX_CLK_USDHC2>,
823 <&clks IMX6SX_CLK_USDHC2>,
824 <&clks IMX6SX_CLK_USDHC2>;
825 clock-names = "ipg", "ahb", "per";
830 usdhc3: usdhc@02198000 {
831 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
832 reg = <0x02198000 0x4000>;
833 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
834 clocks = <&clks IMX6SX_CLK_USDHC3>,
835 <&clks IMX6SX_CLK_USDHC3>,
836 <&clks IMX6SX_CLK_USDHC3>;
837 clock-names = "ipg", "ahb", "per";
842 usdhc4: usdhc@0219c000 {
843 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
844 reg = <0x0219c000 0x4000>;
845 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
846 clocks = <&clks IMX6SX_CLK_USDHC4>,
847 <&clks IMX6SX_CLK_USDHC4>,
848 <&clks IMX6SX_CLK_USDHC4>;
849 clock-names = "ipg", "ahb", "per";
855 #address-cells = <1>;
857 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
858 reg = <0x021a0000 0x4000>;
859 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
860 clocks = <&clks IMX6SX_CLK_I2C1>;
865 #address-cells = <1>;
867 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
868 reg = <0x021a4000 0x4000>;
869 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
870 clocks = <&clks IMX6SX_CLK_I2C2>;
875 #address-cells = <1>;
877 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
878 reg = <0x021a8000 0x4000>;
879 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
880 clocks = <&clks IMX6SX_CLK_I2C3>;
884 mmdc: mmdc@021b0000 {
885 compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
886 reg = <0x021b0000 0x4000>;
889 fec2: ethernet@021b4000 {
890 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
891 reg = <0x021b4000 0x4000>;
892 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
893 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
894 clocks = <&clks IMX6SX_CLK_ENET>,
895 <&clks IMX6SX_CLK_ENET_AHB>,
896 <&clks IMX6SX_CLK_ENET_PTP>,
897 <&clks IMX6SX_CLK_ENET2_REF_125M>,
898 <&clks IMX6SX_CLK_ENET_PTP>;
899 clock-names = "ipg", "ahb", "ptp",
900 "enet_clk_ref", "enet_out";
904 weim: weim@021b8000 {
905 compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
906 reg = <0x021b8000 0x4000>;
907 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
908 clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
911 ocotp: ocotp@021bc000 {
912 compatible = "fsl,imx6sx-ocotp", "syscon";
913 reg = <0x021bc000 0x4000>;
914 clocks = <&clks IMX6SX_CLK_OCOTP>;
918 compatible = "fsl,imx6sx-sai";
919 reg = <0x021d4000 0x4000>;
920 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
921 clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
922 <&clks IMX6SX_CLK_SAI1>,
923 <&clks 0>, <&clks 0>;
924 clock-names = "bus", "mclk1", "mclk2", "mclk3";
925 dma-names = "rx", "tx";
926 dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
927 dma-source = <&gpr 0 15 0 16>;
931 audmux: audmux@021d8000 {
932 compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
933 reg = <0x021d8000 0x4000>;
938 compatible = "fsl,imx6sx-sai";
939 reg = <0x021dc000 0x4000>;
940 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
941 clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
942 <&clks IMX6SX_CLK_SAI2>,
943 <&clks 0>, <&clks 0>;
944 clock-names = "bus", "mclk1", "mclk2", "mclk3";
945 dma-names = "rx", "tx";
946 dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
947 dma-source = <&gpr 0 17 0 18>;
951 qspi1: qspi@021e0000 {
952 #address-cells = <1>;
954 compatible = "fsl,imx6sx-qspi";
955 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
956 reg-names = "QuadSPI", "QuadSPI-memory";
957 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
958 clocks = <&clks IMX6SX_CLK_QSPI1>,
959 <&clks IMX6SX_CLK_QSPI1>;
960 clock-names = "qspi_en", "qspi";
964 qspi2: qspi@021e4000 {
965 #address-cells = <1>;
967 compatible = "fsl,imx6sx-qspi";
968 reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
969 reg-names = "QuadSPI", "QuadSPI-memory";
970 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
971 clocks = <&clks IMX6SX_CLK_QSPI2>,
972 <&clks IMX6SX_CLK_QSPI2>;
973 clock-names = "qspi_en", "qspi";
977 uart2: serial@021e8000 {
978 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
979 reg = <0x021e8000 0x4000>;
980 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
981 clocks = <&clks IMX6SX_CLK_UART_IPG>,
982 <&clks IMX6SX_CLK_UART_SERIAL>;
983 clock-names = "ipg", "per";
984 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
985 dma-names = "rx", "tx";
989 uart3: serial@021ec000 {
990 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
991 reg = <0x021ec000 0x4000>;
992 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
993 clocks = <&clks IMX6SX_CLK_UART_IPG>,
994 <&clks IMX6SX_CLK_UART_SERIAL>;
995 clock-names = "ipg", "per";
996 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
997 dma-names = "rx", "tx";
1001 uart4: serial@021f0000 {
1002 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1003 reg = <0x021f0000 0x4000>;
1004 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1005 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1006 <&clks IMX6SX_CLK_UART_SERIAL>;
1007 clock-names = "ipg", "per";
1008 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1009 dma-names = "rx", "tx";
1010 status = "disabled";
1013 uart5: serial@021f4000 {
1014 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1015 reg = <0x021f4000 0x4000>;
1016 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1017 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1018 <&clks IMX6SX_CLK_UART_SERIAL>;
1019 clock-names = "ipg", "per";
1020 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1021 dma-names = "rx", "tx";
1022 status = "disabled";
1025 i2c4: i2c@021f8000 {
1026 #address-cells = <1>;
1028 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
1029 reg = <0x021f8000 0x4000>;
1030 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1031 clocks = <&clks IMX6SX_CLK_I2C4>;
1032 status = "disabled";
1036 aips3: aips-bus@02200000 {
1037 compatible = "fsl,aips-bus", "simple-bus";
1038 #address-cells = <1>;
1040 reg = <0x02200000 0x100000>;
1044 compatible = "fsl,spba-bus", "simple-bus";
1045 #address-cells = <1>;
1047 reg = <0x02240000 0x40000>;
1050 csi1: csi@02214000 {
1051 reg = <0x02214000 0x4000>;
1052 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1053 clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1054 <&clks IMX6SX_CLK_CSI>,
1055 <&clks IMX6SX_CLK_DCIC1>;
1056 clock-names = "disp-axi", "csi_mclk", "dcic";
1057 status = "disabled";
1061 reg = <0x02218000 0x4000>;
1062 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1063 clocks = <&clks IMX6SX_CLK_PXP_AXI>,
1064 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1065 clock-names = "pxp-axi", "disp-axi";
1066 status = "disabled";
1069 csi2: csi@0221c000 {
1070 reg = <0x0221c000 0x4000>;
1071 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1072 clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1073 <&clks IMX6SX_CLK_CSI>,
1074 <&clks IMX6SX_CLK_DCIC2>;
1075 clock-names = "disp-axi", "csi_mclk", "dcic";
1076 status = "disabled";
1079 lcdif1: lcdif@02220000 {
1080 compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
1081 reg = <0x02220000 0x4000>;
1082 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1083 clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
1084 <&clks IMX6SX_CLK_LCDIF_APB>,
1085 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1086 clock-names = "pix", "axi", "disp_axi";
1087 status = "disabled";
1090 lcdif2: lcdif@02224000 {
1091 compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
1092 reg = <0x02224000 0x4000>;
1093 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1094 clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
1095 <&clks IMX6SX_CLK_LCDIF_APB>,
1096 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1097 clock-names = "pix", "axi", "disp_axi";
1098 status = "disabled";
1101 vadc: vadc@02228000 {
1102 reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
1103 reg-names = "vadc-vafe", "vadc-vdec";
1104 clocks = <&clks IMX6SX_CLK_VADC>,
1105 <&clks IMX6SX_CLK_CSI>;
1106 clock-names = "vadc", "csi";
1107 status = "disabled";
1111 adc1: adc@02280000 {
1112 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1113 reg = <0x02280000 0x4000>;
1114 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1115 clocks = <&clks IMX6SX_CLK_IPG>;
1116 clock-names = "adc";
1117 status = "disabled";
1120 adc2: adc@02284000 {
1121 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1122 reg = <0x02284000 0x4000>;
1123 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1124 clocks = <&clks IMX6SX_CLK_IPG>;
1125 clock-names = "adc";
1126 status = "disabled";
1129 wdog3: wdog@02288000 {
1130 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
1131 reg = <0x02288000 0x4000>;
1132 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1133 clocks = <&clks IMX6SX_CLK_DUMMY>;
1134 status = "disabled";
1137 ecspi5: ecspi@0228c000 {
1138 #address-cells = <1>;
1140 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
1141 reg = <0x0228c000 0x4000>;
1142 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1143 clocks = <&clks IMX6SX_CLK_ECSPI5>,
1144 <&clks IMX6SX_CLK_ECSPI5>;
1145 clock-names = "ipg", "per";
1146 status = "disabled";
1149 uart6: serial@022a0000 {
1150 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1151 reg = <0x022a0000 0x4000>;
1152 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1153 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1154 <&clks IMX6SX_CLK_UART_SERIAL>;
1155 clock-names = "ipg", "per";
1156 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
1157 dma-names = "rx", "tx";
1158 status = "disabled";
1161 pwm5: pwm@022a4000 {
1162 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1163 reg = <0x022a4000 0x4000>;
1164 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
1165 clocks = <&clks IMX6SX_CLK_PWM5>,
1166 <&clks IMX6SX_CLK_PWM5>;
1167 clock-names = "ipg", "per";
1171 pwm6: pwm@022a8000 {
1172 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1173 reg = <0x022a8000 0x4000>;
1174 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1175 clocks = <&clks IMX6SX_CLK_PWM6>,
1176 <&clks IMX6SX_CLK_PWM6>;
1177 clock-names = "ipg", "per";
1181 pwm7: pwm@022ac000 {
1182 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1183 reg = <0x022ac000 0x4000>;
1184 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1185 clocks = <&clks IMX6SX_CLK_PWM7>,
1186 <&clks IMX6SX_CLK_PWM7>;
1187 clock-names = "ipg", "per";
1191 pwm8: pwm@0022b0000 {
1192 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1193 reg = <0x0022b0000 0x4000>;
1194 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1195 clocks = <&clks IMX6SX_CLK_PWM8>,
1196 <&clks IMX6SX_CLK_PWM8>;
1197 clock-names = "ipg", "per";
1202 pcie: pcie@0x08000000 {
1203 compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
1204 reg = <0x08ffc000 0x4000>; /* DBI */
1205 #address-cells = <3>;
1207 device_type = "pci";
1208 /* configuration space */
1209 ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
1210 /* downstream I/O */
1211 0x81000000 0 0 0x08f80000 0 0x00010000
1212 /* non-prefetchable memory */
1213 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
1215 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1216 clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
1217 <&clks IMX6SX_CLK_PCIE_AXI>,
1218 <&clks IMX6SX_CLK_LVDS1_OUT>,
1219 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1220 clock-names = "pcie_ref_125m", "pcie_axi",
1221 "lvds_gate", "display_axi";
1222 status = "disabled";