2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
14 /include/ "imx6q.dtsi"
17 model = "Freescale i.MX6 Quad SABRE Lite Board";
18 compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
21 reg = <0x10000000 0x40000000>;
25 aips-bus@02000000 { /* AIPS1 */
27 ecspi@02008000 { /* eCSPI1 */
28 fsl,spi-num-chipselects = <1>;
29 cs-gpios = <&gpio3 19 0>;
30 pinctrl-names = "default";
31 pinctrl-0 = <&pinctrl_ecspi1_1>;
35 compatible = "sst,sst25vf016b";
36 spi-max-frequency = <20000000>;
42 fsl,mode = "i2s-slave";
48 pinctrl-names = "default";
49 pinctrl-0 = <&pinctrl_hog>;
54 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
55 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
56 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
57 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
58 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
59 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
60 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
61 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
68 aips-bus@02100000 { /* AIPS2 */
69 usb@02184000 { /* USB OTG */
70 vbus-supply = <®_usb_otg_vbus>;
71 pinctrl-names = "default";
72 pinctrl-0 = <&pinctrl_usbotg_1>;
77 usb@02184200 { /* USB1 */
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_enet_1>;
85 phy-reset-gpios = <&gpio3 23 0>;
89 usdhc@02198000 { /* uSDHC3 */
90 pinctrl-names = "default";
91 pinctrl-0 = <&pinctrl_usdhc3_2>;
92 cd-gpios = <&gpio7 0 0>;
93 wp-gpios = <&gpio7 1 0>;
94 vmmc-supply = <®_3p3v>;
98 usdhc@0219c000 { /* uSDHC4 */
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_usdhc4_2>;
101 cd-gpios = <&gpio2 6 0>;
102 wp-gpios = <&gpio2 7 0>;
103 vmmc-supply = <®_3p3v>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_audmux_1>;
113 uart2: serial@021e8000 {
115 pinctrl-names = "default";
116 pinctrl-0 = <&pinctrl_uart2_1>;
119 i2c@021a0000 { /* I2C1 */
121 clock-frequency = <100000>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_i2c1_1>;
126 compatible = "fsl,sgtl5000";
128 clocks = <&clks 169>;
129 VDDA-supply = <®_2p5v>;
130 VDDIO-supply = <®_3p3v>;
137 compatible = "simple-bus";
140 compatible = "regulator-fixed";
141 regulator-name = "2P5V";
142 regulator-min-microvolt = <2500000>;
143 regulator-max-microvolt = <2500000>;
148 compatible = "regulator-fixed";
149 regulator-name = "3P3V";
150 regulator-min-microvolt = <3300000>;
151 regulator-max-microvolt = <3300000>;
155 reg_usb_otg_vbus: usb_otg_vbus {
156 compatible = "regulator-fixed";
157 regulator-name = "usb_otg_vbus";
158 regulator-min-microvolt = <5000000>;
159 regulator-max-microvolt = <5000000>;
160 gpio = <&gpio3 22 0>;
166 compatible = "fsl,imx6q-sabrelite-sgtl5000",
167 "fsl,imx-audio-sgtl5000";
168 model = "imx6q-sabrelite-sgtl5000";
169 ssi-controller = <&ssi1>;
170 audio-codec = <&codec>;
172 "MIC_IN", "Mic Jack",
173 "Mic Jack", "Mic Bias",
174 "Headphone Jack", "HP_OUT";