arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include "imx28-pinfunc.h"
  14
  15 / {
  16         interrupt-parent = <&icoll>;
  17
  18         aliases {
  19                 ethernet0 = &mac0;
  20                 ethernet1 = &mac1;
  21                 gpio0 = &gpio0;
  22                 gpio1 = &gpio1;
  23                 gpio2 = &gpio2;
  24                 gpio3 = &gpio3;
  25                 gpio4 = &gpio4;
  26                 saif0 = &saif0;
  27                 saif1 = &saif1;
  28                 serial0 = &auart0;
  29                 serial1 = &auart1;
  30                 serial2 = &auart2;
  31                 serial3 = &auart3;
  32                 serial4 = &auart4;
  33                 spi0 = &ssp1;
  34                 spi1 = &ssp2;
  35                 usbphy0 = &usbphy0;
  36                 usbphy1 = &usbphy1;
  37         };
  38
  39         cpus {
  40                 #address-cells = <0>;
  41                 #size-cells = <0>;
  42
  43                 cpu {
  44                         compatible = "arm,arm926ej-s";
  45                         device_type = "cpu";
  46                 };
  47         };
  48
  49         apb@80000000 {
  50                 compatible = "simple-bus";
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53                 reg = <0x80000000 0x80000>;
  54                 ranges;
  55
  56                 apbh@80000000 {
  57                         compatible = "simple-bus";
  58                         #address-cells = <1>;
  59                         #size-cells = <1>;
  60                         reg = <0x80000000 0x3c900>;
  61                         ranges;
  62
  63                         icoll: interrupt-controller@80000000 {
  64                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  65                                 interrupt-controller;
  66                                 #interrupt-cells = <1>;
  67                                 reg = <0x80000000 0x2000>;
  68                         };
  69
  70                         hsadc: hsadc@80002000 {
  71                                 reg = <0x80002000 0x2000>;
  72                                 interrupts = <13>;
  73                                 dmas = <&dma_apbh 12>;
  74                                 dma-names = "rx";
  75                                 status = "disabled";
  76                         };
  77
  78                         dma_apbh: dma-apbh@80004000 {
  79                                 compatible = "fsl,imx28-dma-apbh";
  80                                 reg = <0x80004000 0x2000>;
  81                                 interrupts = <82 83 84 85
  82                                               88 88 88 88
  83                                               88 88 88 88
  84                                               87 86 0 0>;
  85                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  86                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  87                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  88                                                   "hsadc", "lcdif", "empty", "empty";
  89                                 #dma-cells = <1>;
  90                                 dma-channels = <16>;
  91                                 clocks = <&clks 25>;
  92                         };
  93
  94                         perfmon: perfmon@80006000 {
  95                                 reg = <0x80006000 0x800>;
  96                                 interrupts = <27>;
  97                                 status = "disabled";
  98                         };
  99
 100                         gpmi: gpmi-nand@8000c000 {
 101                                 compatible = "fsl,imx28-gpmi-nand";
 102                                 #address-cells = <1>;
 103                                 #size-cells = <1>;
 104                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 105                                 reg-names = "gpmi-nand", "bch";
 106                                 interrupts = <41>;
 107                                 interrupt-names = "bch";
 108                                 clocks = <&clks 50>;
 109                                 clock-names = "gpmi_io";
 110                                 dmas = <&dma_apbh 4>;
 111                                 dma-names = "rx-tx";
 112                                 status = "disabled";
 113                         };
 114
 115                         ssp0: ssp@80010000 {
 116                                 #address-cells = <1>;
 117                                 #size-cells = <0>;
 118                                 reg = <0x80010000 0x2000>;
 119                                 interrupts = <96>;
 120                                 clocks = <&clks 46>;
 121                                 dmas = <&dma_apbh 0>;
 122                                 dma-names = "rx-tx";
 123                                 status = "disabled";
 124                         };
 125
 126                         ssp1: ssp@80012000 {
 127                                 #address-cells = <1>;
 128                                 #size-cells = <0>;
 129                                 reg = <0x80012000 0x2000>;
 130                                 interrupts = <97>;
 131                                 clocks = <&clks 47>;
 132                                 dmas = <&dma_apbh 1>;
 133                                 dma-names = "rx-tx";
 134                                 status = "disabled";
 135                         };
 136
 137                         ssp2: ssp@80014000 {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140                                 reg = <0x80014000 0x2000>;
 141                                 interrupts = <98>;
 142                                 clocks = <&clks 48>;
 143                                 dmas = <&dma_apbh 2>;
 144                                 dma-names = "rx-tx";
 145                                 status = "disabled";
 146                         };
 147
 148                         ssp3: ssp@80016000 {
 149                                 #address-cells = <1>;
 150                                 #size-cells = <0>;
 151                                 reg = <0x80016000 0x2000>;
 152                                 interrupts = <99>;
 153                                 clocks = <&clks 49>;
 154                                 dmas = <&dma_apbh 3>;
 155                                 dma-names = "rx-tx";
 156                                 status = "disabled";
 157                         };
 158
 159                         pinctrl: pinctrl@80018000 {
 160                                 #address-cells = <1>;
 161                                 #size-cells = <0>;
 162                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 163                                 reg = <0x80018000 0x2000>;
 164
 165                                 gpio0: gpio@0 {
 166                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 167                                         interrupts = <127>;
 168                                         gpio-controller;
 169                                         #gpio-cells = <2>;
 170                                         interrupt-controller;
 171                                         #interrupt-cells = <2>;
 172                                 };
 173
 174                                 gpio1: gpio@1 {
 175                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 176                                         interrupts = <126>;
 177                                         gpio-controller;
 178                                         #gpio-cells = <2>;
 179                                         interrupt-controller;
 180                                         #interrupt-cells = <2>;
 181                                 };
 182
 183                                 gpio2: gpio@2 {
 184                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 185                                         interrupts = <125>;
 186                                         gpio-controller;
 187                                         #gpio-cells = <2>;
 188                                         interrupt-controller;
 189                                         #interrupt-cells = <2>;
 190                                 };
 191
 192                                 gpio3: gpio@3 {
 193                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 194                                         interrupts = <124>;
 195                                         gpio-controller;
 196                                         #gpio-cells = <2>;
 197                                         interrupt-controller;
 198                                         #interrupt-cells = <2>;
 199                                 };
 200
 201                                 gpio4: gpio@4 {
 202                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 203                                         interrupts = <123>;
 204                                         gpio-controller;
 205                                         #gpio-cells = <2>;
 206                                         interrupt-controller;
 207                                         #interrupt-cells = <2>;
 208                                 };
 209
 210                                 duart_pins_a: duart@0 {
 211                                         reg = <0>;
 212                                         fsl,pinmux-ids = <
 213                                                 MX28_PAD_PWM0__DUART_RX
 214                                                 MX28_PAD_PWM1__DUART_TX
 215                                         >;
 216                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 217                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 218                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 219                                 };
 220
 221                                 duart_pins_b: duart@1 {
 222                                         reg = <1>;
 223                                         fsl,pinmux-ids = <
 224                                                 MX28_PAD_AUART0_CTS__DUART_RX
 225                                                 MX28_PAD_AUART0_RTS__DUART_TX
 226                                         >;
 227                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 228                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 229                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 230                                 };
 231
 232                                 duart_4pins_a: duart-4pins@0 {
 233                                         reg = <0>;
 234                                         fsl,pinmux-ids = <
 235                                                 MX28_PAD_AUART0_CTS__DUART_RX
 236                                                 MX28_PAD_AUART0_RTS__DUART_TX
 237                                                 MX28_PAD_AUART0_RX__DUART_CTS
 238                                                 MX28_PAD_AUART0_TX__DUART_RTS
 239                                         >;
 240                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 241                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 242                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 243                                 };
 244
 245                                 gpmi_pins_a: gpmi-nand@0 {
 246                                         reg = <0>;
 247                                         fsl,pinmux-ids = <
 248                                                 MX28_PAD_GPMI_D00__GPMI_D0
 249                                                 MX28_PAD_GPMI_D01__GPMI_D1
 250                                                 MX28_PAD_GPMI_D02__GPMI_D2
 251                                                 MX28_PAD_GPMI_D03__GPMI_D3
 252                                                 MX28_PAD_GPMI_D04__GPMI_D4
 253                                                 MX28_PAD_GPMI_D05__GPMI_D5
 254                                                 MX28_PAD_GPMI_D06__GPMI_D6
 255                                                 MX28_PAD_GPMI_D07__GPMI_D7
 256                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
 257                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
 258                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 259                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 260                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
 261                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
 262                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 263                                         >;
 264                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 265                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 266                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 267                                 };
 268
 269                                 gpmi_status_cfg: gpmi-status-cfg {
 270                                         fsl,pinmux-ids = <
 271                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 272                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 273                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 274                                         >;
 275                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 276                                 };
 277
 278                                 auart0_pins_a: auart0@0 {
 279                                         reg = <0>;
 280                                         fsl,pinmux-ids = <
 281                                                 MX28_PAD_AUART0_RX__AUART0_RX
 282                                                 MX28_PAD_AUART0_TX__AUART0_TX
 283                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
 284                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
 285                                         >;
 286                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 287                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 288                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 289                                 };
 290
 291                                 auart0_2pins_a: auart0-2pins@0 {
 292                                         reg = <0>;
 293                                         fsl,pinmux-ids = <
 294                                                 MX28_PAD_AUART0_RX__AUART0_RX
 295                                                 MX28_PAD_AUART0_TX__AUART0_TX
 296                                         >;
 297                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 298                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 299                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 300                                 };
 301
 302                                 auart1_pins_a: auart1@0 {
 303                                         reg = <0>;
 304                                         fsl,pinmux-ids = <
 305                                                 MX28_PAD_AUART1_RX__AUART1_RX
 306                                                 MX28_PAD_AUART1_TX__AUART1_TX
 307                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
 308                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
 309                                         >;
 310                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 311                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 312                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 313                                 };
 314
 315                                 auart1_2pins_a: auart1-2pins@0 {
 316                                         reg = <0>;
 317                                         fsl,pinmux-ids = <
 318                                                 MX28_PAD_AUART1_RX__AUART1_RX
 319                                                 MX28_PAD_AUART1_TX__AUART1_TX
 320                                         >;
 321                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 322                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 323                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 324                                 };
 325
 326                                 auart2_2pins_a: auart2-2pins@0 {
 327                                         reg = <0>;
 328                                         fsl,pinmux-ids = <
 329                                                 MX28_PAD_SSP2_SCK__AUART2_RX
 330                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
 331                                         >;
 332                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 333                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 334                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 335                                 };
 336
 337                                 auart2_2pins_b: auart2-2pins@1 {
 338                                         reg = <1>;
 339                                         fsl,pinmux-ids = <
 340                                                 MX28_PAD_AUART2_RX__AUART2_RX
 341                                                 MX28_PAD_AUART2_TX__AUART2_TX
 342                                         >;
 343                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 344                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 345                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 346                                 };
 347
 348                                 auart2_pins_a: auart2-pins@0 {
 349                                         reg = <0>;
 350                                         fsl,pinmux-ids = <
 351                                                 MX28_PAD_AUART2_RX__AUART2_RX
 352                                                 MX28_PAD_AUART2_TX__AUART2_TX
 353                                                 MX28_PAD_AUART2_CTS__AUART2_CTS
 354                                                 MX28_PAD_AUART2_RTS__AUART2_RTS
 355                                         >;
 356                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 357                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 358                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 359                                 };
 360
 361                                 auart3_pins_a: auart3@0 {
 362                                         reg = <0>;
 363                                         fsl,pinmux-ids = <
 364                                                 MX28_PAD_AUART3_RX__AUART3_RX
 365                                                 MX28_PAD_AUART3_TX__AUART3_TX
 366                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
 367                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
 368                                         >;
 369                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 370                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 371                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 372                                 };
 373
 374                                 auart3_2pins_a: auart3-2pins@0 {
 375                                         reg = <0>;
 376                                         fsl,pinmux-ids = <
 377                                                 MX28_PAD_SSP2_MISO__AUART3_RX
 378                                                 MX28_PAD_SSP2_SS0__AUART3_TX
 379                                         >;
 380                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 381                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 382                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 383                                 };
 384
 385                                 auart3_2pins_b: auart3-2pins@1 {
 386                                         reg = <1>;
 387                                         fsl,pinmux-ids = <
 388                                                 MX28_PAD_AUART3_RX__AUART3_RX
 389                                                 MX28_PAD_AUART3_TX__AUART3_TX
 390                                         >;
 391                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 392                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 393                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 394                                 };
 395
 396                                 auart4_2pins_a: auart4@0 {
 397                                         reg = <0>;
 398                                         fsl,pinmux-ids = <
 399                                                 MX28_PAD_SSP3_SCK__AUART4_TX
 400                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
 401                                         >;
 402                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 403                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 404                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 405                                 };
 406
 407                                 mac0_pins_a: mac0@0 {
 408                                         reg = <0>;
 409                                         fsl,pinmux-ids = <
 410                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 411                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 412                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 413                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 414                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 415                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 416                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 417                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 418                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 419                                         >;
 420                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 421                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 422                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 423                                 };
 424
 425                                 mac1_pins_a: mac1@0 {
 426                                         reg = <0>;
 427                                         fsl,pinmux-ids = <
 428                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
 429                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
 430                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
 431                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
 432                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
 433                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
 434                                         >;
 435                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 436                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 437                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 438                                 };
 439
 440                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 441                                         reg = <0>;
 442                                         fsl,pinmux-ids = <
 443                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 444                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 445                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 446                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 447                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
 448                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
 449                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
 450                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
 451                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 452                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 453                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 454                                         >;
 455                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 456                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 457                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 458                                 };
 459
 460                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 461                                         reg = <0>;
 462                                         fsl,pinmux-ids = <
 463                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 464                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 465                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 466                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 467                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 468                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 469                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 470                                         >;
 471                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 472                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 473                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 474                                 };
 475
 476                                 mmc0_cd_cfg: mmc0-cd-cfg {
 477                                         fsl,pinmux-ids = <
 478                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 479                                         >;
 480                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 481                                 };
 482
 483                                 mmc0_sck_cfg: mmc0-sck-cfg {
 484                                         fsl,pinmux-ids = <
 485                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 486                                         >;
 487                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 488                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 489                                 };
 490
 491                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
 492                                         reg = <0>;
 493                                         fsl,pinmux-ids = <
 494                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
 495                                                 MX28_PAD_SSP1_SCK__SSP2_D1
 496                                                 MX28_PAD_SSP1_CMD__SSP2_D2
 497                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
 498                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
 499                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 500                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 501                                         >;
 502                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 503                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 504                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 505                                 };
 506
 507                                 mmc2_cd_cfg: mmc2-cd-cfg {
 508                                         fsl,pinmux-ids = <
 509                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 510                                         >;
 511                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 512                                 };
 513
 514                                 mmc2_sck_cfg: mmc2-sck-cfg {
 515                                         fsl,pinmux-ids = <
 516                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 517                                         >;
 518                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 519                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 520                                 };
 521
 522                                 i2c0_pins_a: i2c0@0 {
 523                                         reg = <0>;
 524                                         fsl,pinmux-ids = <
 525                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
 526                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
 527                                         >;
 528                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 529                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 530                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 531                                 };
 532
 533                                 i2c0_pins_b: i2c0@1 {
 534                                         reg = <1>;
 535                                         fsl,pinmux-ids = <
 536                                                 MX28_PAD_AUART0_RX__I2C0_SCL
 537                                                 MX28_PAD_AUART0_TX__I2C0_SDA
 538                                         >;
 539                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 540                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 541                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 542                                 };
 543
 544                                 i2c1_pins_a: i2c1@0 {
 545                                         reg = <0>;
 546                                         fsl,pinmux-ids = <
 547                                                 MX28_PAD_PWM0__I2C1_SCL
 548                                                 MX28_PAD_PWM1__I2C1_SDA
 549                                         >;
 550                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 551                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 552                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 553                                 };
 554
 555                                 saif0_pins_a: saif0@0 {
 556                                         reg = <0>;
 557                                         fsl,pinmux-ids = <
 558                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
 559                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 560                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 561                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 562                                         >;
 563                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 564                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 565                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 566                                 };
 567
 568                                 saif0_pins_b: saif0@1 {
 569                                         reg = <1>;
 570                                         fsl,pinmux-ids = <
 571                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 572                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 573                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 574                                         >;
 575                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 576                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 577                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 578                                 };
 579
 580                                 saif1_pins_a: saif1@0 {
 581                                         reg = <0>;
 582                                         fsl,pinmux-ids = <
 583                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 584                                         >;
 585                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 586                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 587                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 588                                 };
 589
 590                                 pwm0_pins_a: pwm0@0 {
 591                                         reg = <0>;
 592                                         fsl,pinmux-ids = <
 593                                                 MX28_PAD_PWM0__PWM_0
 594                                         >;
 595                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 596                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 597                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 598                                 };
 599
 600                                 pwm2_pins_a: pwm2@0 {
 601                                         reg = <0>;
 602                                         fsl,pinmux-ids = <
 603                                                 MX28_PAD_PWM2__PWM_2
 604                                         >;
 605                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 606                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 607                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 608                                 };
 609
 610                                 pwm3_pins_a: pwm3@0 {
 611                                         reg = <0>;
 612                                         fsl,pinmux-ids = <
 613                                                 MX28_PAD_PWM3__PWM_3
 614                                         >;
 615                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 616                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 617                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 618                                 };
 619
 620                                 pwm3_pins_b: pwm3@1 {
 621                                         reg = <1>;
 622                                         fsl,pinmux-ids = <
 623                                                 MX28_PAD_SAIF0_MCLK__PWM_3
 624                                         >;
 625                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 626                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 627                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 628                                 };
 629
 630                                 pwm4_pins_a: pwm4@0 {
 631                                         reg = <0>;
 632                                         fsl,pinmux-ids = <
 633                                                 MX28_PAD_PWM4__PWM_4
 634                                         >;
 635                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 636                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 637                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 638                                 };
 639
 640                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 641                                         reg = <0>;
 642                                         fsl,pinmux-ids = <
 643                                                 MX28_PAD_LCD_D00__LCD_D0
 644                                                 MX28_PAD_LCD_D01__LCD_D1
 645                                                 MX28_PAD_LCD_D02__LCD_D2
 646                                                 MX28_PAD_LCD_D03__LCD_D3
 647                                                 MX28_PAD_LCD_D04__LCD_D4
 648                                                 MX28_PAD_LCD_D05__LCD_D5
 649                                                 MX28_PAD_LCD_D06__LCD_D6
 650                                                 MX28_PAD_LCD_D07__LCD_D7
 651                                                 MX28_PAD_LCD_D08__LCD_D8
 652                                                 MX28_PAD_LCD_D09__LCD_D9
 653                                                 MX28_PAD_LCD_D10__LCD_D10
 654                                                 MX28_PAD_LCD_D11__LCD_D11
 655                                                 MX28_PAD_LCD_D12__LCD_D12
 656                                                 MX28_PAD_LCD_D13__LCD_D13
 657                                                 MX28_PAD_LCD_D14__LCD_D14
 658                                                 MX28_PAD_LCD_D15__LCD_D15
 659                                                 MX28_PAD_LCD_D16__LCD_D16
 660                                                 MX28_PAD_LCD_D17__LCD_D17
 661                                                 MX28_PAD_LCD_D18__LCD_D18
 662                                                 MX28_PAD_LCD_D19__LCD_D19
 663                                                 MX28_PAD_LCD_D20__LCD_D20
 664                                                 MX28_PAD_LCD_D21__LCD_D21
 665                                                 MX28_PAD_LCD_D22__LCD_D22
 666                                                 MX28_PAD_LCD_D23__LCD_D23
 667                                         >;
 668                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 669                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 670                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 671                                 };
 672
 673                                 lcdif_18bit_pins_a: lcdif-18bit@0 {
 674                                         reg = <0>;
 675                                         fsl,pinmux-ids = <
 676                                                 MX28_PAD_LCD_D00__LCD_D0
 677                                                 MX28_PAD_LCD_D01__LCD_D1
 678                                                 MX28_PAD_LCD_D02__LCD_D2
 679                                                 MX28_PAD_LCD_D03__LCD_D3
 680                                                 MX28_PAD_LCD_D04__LCD_D4
 681                                                 MX28_PAD_LCD_D05__LCD_D5
 682                                                 MX28_PAD_LCD_D06__LCD_D6
 683                                                 MX28_PAD_LCD_D07__LCD_D7
 684                                                 MX28_PAD_LCD_D08__LCD_D8
 685                                                 MX28_PAD_LCD_D09__LCD_D9
 686                                                 MX28_PAD_LCD_D10__LCD_D10
 687                                                 MX28_PAD_LCD_D11__LCD_D11
 688                                                 MX28_PAD_LCD_D12__LCD_D12
 689                                                 MX28_PAD_LCD_D13__LCD_D13
 690                                                 MX28_PAD_LCD_D14__LCD_D14
 691                                                 MX28_PAD_LCD_D15__LCD_D15
 692                                                 MX28_PAD_LCD_D16__LCD_D16
 693                                                 MX28_PAD_LCD_D17__LCD_D17
 694                                         >;
 695                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 696                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 697                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 698                                 };
 699
 700                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 701                                         reg = <0>;
 702                                         fsl,pinmux-ids = <
 703                                                 MX28_PAD_LCD_D00__LCD_D0
 704                                                 MX28_PAD_LCD_D01__LCD_D1
 705                                                 MX28_PAD_LCD_D02__LCD_D2
 706                                                 MX28_PAD_LCD_D03__LCD_D3
 707                                                 MX28_PAD_LCD_D04__LCD_D4
 708                                                 MX28_PAD_LCD_D05__LCD_D5
 709                                                 MX28_PAD_LCD_D06__LCD_D6
 710                                                 MX28_PAD_LCD_D07__LCD_D7
 711                                                 MX28_PAD_LCD_D08__LCD_D8
 712                                                 MX28_PAD_LCD_D09__LCD_D9
 713                                                 MX28_PAD_LCD_D10__LCD_D10
 714                                                 MX28_PAD_LCD_D11__LCD_D11
 715                                                 MX28_PAD_LCD_D12__LCD_D12
 716                                                 MX28_PAD_LCD_D13__LCD_D13
 717                                                 MX28_PAD_LCD_D14__LCD_D14
 718                                                 MX28_PAD_LCD_D15__LCD_D15
 719                                         >;
 720                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 721                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 722                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 723                                 };
 724
 725                                 lcdif_sync_pins_a: lcdif-sync@0 {
 726                                         reg = <0>;
 727                                         fsl,pinmux-ids = <
 728                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
 729                                                 MX28_PAD_LCD_CS__LCD_ENABLE
 730                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
 731                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 732                                         >;
 733                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 734                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 735                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 736                                 };
 737
 738                                 can0_pins_a: can0@0 {
 739                                         reg = <0>;
 740                                         fsl,pinmux-ids = <
 741                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
 742                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
 743                                         >;
 744                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 745                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 746                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 747                                 };
 748
 749                                 can1_pins_a: can1@0 {
 750                                         reg = <0>;
 751                                         fsl,pinmux-ids = <
 752                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
 753                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
 754                                         >;
 755                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 756                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 757                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 758                                 };
 759
 760                                 spi2_pins_a: spi2@0 {
 761                                         reg = <0>;
 762                                         fsl,pinmux-ids = <
 763                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 764                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 765                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 766                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 767                                         >;
 768                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 769                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 770                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 771                                 };
 772
 773                                 spi3_pins_a: spi3@0 {
 774                                         reg = <0>;
 775                                         fsl,pinmux-ids = <
 776                                                 MX28_PAD_AUART2_RX__SSP3_D4
 777                                                 MX28_PAD_AUART2_TX__SSP3_D5
 778                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 779                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 780                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 781                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 782                                         >;
 783                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 784                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 785                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 786                                 };
 787
 788                                 usb0_pins_a: usb0@0 {
 789                                         reg = <0>;
 790                                         fsl,pinmux-ids = <
 791                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 792                                         >;
 793                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 794                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 795                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 796                                 };
 797
 798                                 usb0_pins_b: usb0@1 {
 799                                         reg = <1>;
 800                                         fsl,pinmux-ids = <
 801                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 802                                         >;
 803                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 804                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 805                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 806                                 };
 807
 808                                 usb1_pins_a: usb1@0 {
 809                                         reg = <0>;
 810                                         fsl,pinmux-ids = <
 811                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 812                                         >;
 813                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 814                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 815                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 816                                 };
 817
 818                                 usb0_id_pins_a: usb0id@0 {
 819                                         reg = <0>;
 820                                         fsl,pinmux-ids = <
 821                                                 MX28_PAD_AUART1_RTS__USB0_ID
 822                                         >;
 823                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 824                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 825                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 826                                 };
 827
 828                                 usb0_id_pins_b: usb0id1@0 {
 829                                         reg = <0>;
 830                                         fsl,pinmux-ids = <
 831                                                 MX28_PAD_PWM2__USB0_ID
 832                                         >;
 833                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 834                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 835                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 836                                 };
 837
 838                         };
 839
 840                         digctl: digctl@8001c000 {
 841                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 842                                 reg = <0x8001c000 0x2000>;
 843                                 interrupts = <89>;
 844                                 status = "disabled";
 845                         };
 846
 847                         etm: etm@80022000 {
 848                                 reg = <0x80022000 0x2000>;
 849                                 status = "disabled";
 850                         };
 851
 852                         dma_apbx: dma-apbx@80024000 {
 853                                 compatible = "fsl,imx28-dma-apbx";
 854                                 reg = <0x80024000 0x2000>;
 855                                 interrupts = <78 79 66 0
 856                                               80 81 68 69
 857                                               70 71 72 73
 858                                               74 75 76 77>;
 859                                 interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
 860                                                   "saif0", "saif1", "i2c0", "i2c1",
 861                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 862                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 863                                 #dma-cells = <1>;
 864                                 dma-channels = <16>;
 865                                 clocks = <&clks 26>;
 866                         };
 867
 868                         dcp: dcp@80028000 {
 869                                 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 870                                 reg = <0x80028000 0x2000>;
 871                                 interrupts = <52 53 54>;
 872                                 status = "okay";
 873                         };
 874
 875                         pxp: pxp@8002a000 {
 876                                 reg = <0x8002a000 0x2000>;
 877                                 interrupts = <39>;
 878                                 status = "disabled";
 879                         };
 880
 881                         ocotp: ocotp@8002c000 {
 882                                 compatible = "fsl,ocotp";
 883                                 reg = <0x8002c000 0x2000>;
 884                                 status = "disabled";
 885                         };
 886
 887                         axi-ahb@8002e000 {
 888                                 reg = <0x8002e000 0x2000>;
 889                                 status = "disabled";
 890                         };
 891
 892                         lcdif: lcdif@80030000 {
 893                                 compatible = "fsl,imx28-lcdif";
 894                                 reg = <0x80030000 0x2000>;
 895                                 interrupts = <38>;
 896                                 clocks = <&clks 55>;
 897                                 dmas = <&dma_apbh 13>;
 898                                 dma-names = "rx";
 899                                 status = "disabled";
 900                         };
 901
 902                         can0: can@80032000 {
 903                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 904                                 reg = <0x80032000 0x2000>;
 905                                 interrupts = <8>;
 906                                 clocks = <&clks 58>, <&clks 58>;
 907                                 clock-names = "ipg", "per";
 908                                 status = "disabled";
 909                         };
 910
 911                         can1: can@80034000 {
 912                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 913                                 reg = <0x80034000 0x2000>;
 914                                 interrupts = <9>;
 915                                 clocks = <&clks 59>, <&clks 59>;
 916                                 clock-names = "ipg", "per";
 917                                 status = "disabled";
 918                         };
 919
 920                         simdbg: simdbg@8003c000 {
 921                                 reg = <0x8003c000 0x200>;
 922                                 status = "disabled";
 923                         };
 924
 925                         simgpmisel: simgpmisel@8003c200 {
 926                                 reg = <0x8003c200 0x100>;
 927                                 status = "disabled";
 928                         };
 929
 930                         simsspsel: simsspsel@8003c300 {
 931                                 reg = <0x8003c300 0x100>;
 932                                 status = "disabled";
 933                         };
 934
 935                         simmemsel: simmemsel@8003c400 {
 936                                 reg = <0x8003c400 0x100>;
 937                                 status = "disabled";
 938                         };
 939
 940                         gpiomon: gpiomon@8003c500 {
 941                                 reg = <0x8003c500 0x100>;
 942                                 status = "disabled";
 943                         };
 944
 945                         simenet: simenet@8003c700 {
 946                                 reg = <0x8003c700 0x100>;
 947                                 status = "disabled";
 948                         };
 949
 950                         armjtag: armjtag@8003c800 {
 951                                 reg = <0x8003c800 0x100>;
 952                                 status = "disabled";
 953                         };
 954                 };
 955
 956                 apbx@80040000 {
 957                         compatible = "simple-bus";
 958                         #address-cells = <1>;
 959                         #size-cells = <1>;
 960                         reg = <0x80040000 0x40000>;
 961                         ranges;
 962
 963                         clks: clkctrl@80040000 {
 964                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 965                                 reg = <0x80040000 0x2000>;
 966                                 #clock-cells = <1>;
 967                         };
 968
 969                         saif0: saif@80042000 {
 970                                 compatible = "fsl,imx28-saif";
 971                                 reg = <0x80042000 0x2000>;
 972                                 interrupts = <59>;
 973                                 #clock-cells = <0>;
 974                                 clocks = <&clks 53>;
 975                                 dmas = <&dma_apbx 4>;
 976                                 dma-names = "rx-tx";
 977                                 status = "disabled";
 978                         };
 979
 980                         power: power@80044000 {
 981                                 reg = <0x80044000 0x2000>;
 982                                 status = "disabled";
 983                         };
 984
 985                         saif1: saif@80046000 {
 986                                 compatible = "fsl,imx28-saif";
 987                                 reg = <0x80046000 0x2000>;
 988                                 interrupts = <58>;
 989                                 clocks = <&clks 54>;
 990                                 dmas = <&dma_apbx 5>;
 991                                 dma-names = "rx-tx";
 992                                 status = "disabled";
 993                         };
 994
 995                         lradc: lradc@80050000 {
 996                                 compatible = "fsl,imx28-lradc";
 997                                 reg = <0x80050000 0x2000>;
 998                                 interrupts = <10 14 15 16 17 18 19
 999                                                 20 21 22 23 24 25>;
1000                                 status = "disabled";
1001                                 clocks = <&clks 41>;
1002                                 #io-channel-cells = <1>;
1003                         };
1004
1005                         spdif: spdif@80054000 {
1006                                 reg = <0x80054000 0x2000>;
1007                                 interrupts = <45>;
1008                                 dmas = <&dma_apbx 2>;
1009                                 dma-names = "tx";
1010                                 status = "disabled";
1011                         };
1012
1013                         mxs_rtc: rtc@80056000 {
1014                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1015                                 reg = <0x80056000 0x2000>;
1016                                 interrupts = <29>;
1017                         };
1018
1019                         i2c0: i2c@80058000 {
1020                                 #address-cells = <1>;
1021                                 #size-cells = <0>;
1022                                 compatible = "fsl,imx28-i2c";
1023                                 reg = <0x80058000 0x2000>;
1024                                 interrupts = <111>;
1025                                 clock-frequency = <100000>;
1026                                 dmas = <&dma_apbx 6>;
1027                                 dma-names = "rx-tx";
1028                                 status = "disabled";
1029                         };
1030
1031                         i2c1: i2c@8005a000 {
1032                                 #address-cells = <1>;
1033                                 #size-cells = <0>;
1034                                 compatible = "fsl,imx28-i2c";
1035                                 reg = <0x8005a000 0x2000>;
1036                                 interrupts = <110>;
1037                                 clock-frequency = <100000>;
1038                                 dmas = <&dma_apbx 7>;
1039                                 dma-names = "rx-tx";
1040                                 status = "disabled";
1041                         };
1042
1043                         pwm: pwm@80064000 {
1044                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1045                                 reg = <0x80064000 0x2000>;
1046                                 clocks = <&clks 44>;
1047                                 #pwm-cells = <2>;
1048                                 fsl,pwm-number = <8>;
1049                                 status = "disabled";
1050                         };
1051
1052                         timer: timrot@80068000 {
1053                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
1054                                 reg = <0x80068000 0x2000>;
1055                                 interrupts = <48 49 50 51>;
1056                                 clocks = <&clks 26>;
1057                         };
1058
1059                         auart0: serial@8006a000 {
1060                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1061                                 reg = <0x8006a000 0x2000>;
1062                                 interrupts = <112>;
1063                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1064                                 dma-names = "rx", "tx";
1065                                 clocks = <&clks 45>;
1066                                 status = "disabled";
1067                         };
1068
1069                         auart1: serial@8006c000 {
1070                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1071                                 reg = <0x8006c000 0x2000>;
1072                                 interrupts = <113>;
1073                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1074                                 dma-names = "rx", "tx";
1075                                 clocks = <&clks 45>;
1076                                 status = "disabled";
1077                         };
1078
1079                         auart2: serial@8006e000 {
1080                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1081                                 reg = <0x8006e000 0x2000>;
1082                                 interrupts = <114>;
1083                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1084                                 dma-names = "rx", "tx";
1085                                 clocks = <&clks 45>;
1086                                 status = "disabled";
1087                         };
1088
1089                         auart3: serial@80070000 {
1090                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1091                                 reg = <0x80070000 0x2000>;
1092                                 interrupts = <115>;
1093                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1094                                 dma-names = "rx", "tx";
1095                                 clocks = <&clks 45>;
1096                                 status = "disabled";
1097                         };
1098
1099                         auart4: serial@80072000 {
1100                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1101                                 reg = <0x80072000 0x2000>;
1102                                 interrupts = <116>;
1103                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1104                                 dma-names = "rx", "tx";
1105                                 clocks = <&clks 45>;
1106                                 status = "disabled";
1107                         };
1108
1109                         duart: serial@80074000 {
1110                                 compatible = "arm,pl011", "arm,primecell";
1111                                 reg = <0x80074000 0x1000>;
1112                                 interrupts = <47>;
1113                                 clocks = <&clks 45>, <&clks 26>;
1114                                 clock-names = "uart", "apb_pclk";
1115                                 status = "disabled";
1116                         };
1117
1118                         usbphy0: usbphy@8007c000 {
1119                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1120                                 reg = <0x8007c000 0x2000>;
1121                                 clocks = <&clks 62>;
1122                                 status = "disabled";
1123                         };
1124
1125                         usbphy1: usbphy@8007e000 {
1126                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1127                                 reg = <0x8007e000 0x2000>;
1128                                 clocks = <&clks 63>;
1129                                 status = "disabled";
1130                         };
1131                 };
1132         };
1133
1134         ahb@80080000 {
1135                 compatible = "simple-bus";
1136                 #address-cells = <1>;
1137                 #size-cells = <1>;
1138                 reg = <0x80080000 0x80000>;
1139                 ranges;
1140
1141                 usb0: usb@80080000 {
1142                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1143                         reg = <0x80080000 0x10000>;
1144                         interrupts = <93>;
1145                         clocks = <&clks 60>;
1146                         fsl,usbphy = <&usbphy0>;
1147                         status = "disabled";
1148                 };
1149
1150                 usb1: usb@80090000 {
1151                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1152                         reg = <0x80090000 0x10000>;
1153                         interrupts = <92>;
1154                         clocks = <&clks 61>;
1155                         fsl,usbphy = <&usbphy1>;
1156                         status = "disabled";
1157                 };
1158
1159                 dflpt: dflpt@800c0000 {
1160                         reg = <0x800c0000 0x10000>;
1161                         status = "disabled";
1162                 };
1163
1164                 mac0: ethernet@800f0000 {
1165                         compatible = "fsl,imx28-fec";
1166                         reg = <0x800f0000 0x4000>;
1167                         interrupts = <101>;
1168                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1169                         clock-names = "ipg", "ahb", "enet_out";
1170                         status = "disabled";
1171                 };
1172
1173                 mac1: ethernet@800f4000 {
1174                         compatible = "fsl,imx28-fec";
1175                         reg = <0x800f4000 0x4000>;
1176                         interrupts = <102>;
1177                         clocks = <&clks 57>, <&clks 57>;
1178                         clock-names = "ipg", "ahb";
1179                         status = "disabled";
1180                 };
1181
1182                 etn_switch: switch@800f8000 {
1183                         reg = <0x800f8000 0x8000>;
1184                         status = "disabled";
1185                 };
1186         };
1187
1188         iio_hwmon {
1189                 compatible = "iio-hwmon";
1190                 io-channels = <&lradc 8>;
1191         };
1192 };