arch/arm/boot/dts/imx23.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 serial0 = &auart0;
  22                 serial1 = &auart1;
  23         };
  24
  25         cpus {
  26                 cpu@0 {
  27                         compatible = "arm,arm926ejs";
  28                 };
  29         };
  30
  31         apb@80000000 {
  32                 compatible = "simple-bus";
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35                 reg = <0x80000000 0x80000>;
  36                 ranges;
  37
  38                 apbh@80000000 {
  39                         compatible = "simple-bus";
  40                         #address-cells = <1>;
  41                         #size-cells = <1>;
  42                         reg = <0x80000000 0x40000>;
  43                         ranges;
  44
  45                         icoll: interrupt-controller@80000000 {
  46                                 compatible = "fsl,imx23-icoll", "fsl,icoll";
  47                                 interrupt-controller;
  48                                 #interrupt-cells = <1>;
  49                                 reg = <0x80000000 0x2000>;
  50                         };
  51
  52                         dma-apbh@80004000 {
  53                                 compatible = "fsl,imx23-dma-apbh";
  54                                 reg = <0x80004000 0x2000>;
  55                                 clocks = <&clks 15>;
  56                         };
  57
  58                         ecc@80008000 {
  59                                 reg = <0x80008000 0x2000>;
  60                                 status = "disabled";
  61                         };
  62
  63                         gpmi-nand@8000c000 {
  64                                 compatible = "fsl,imx23-gpmi-nand";
  65                                 #address-cells = <1>;
  66                                 #size-cells = <1>;
  67                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
  68                                 reg-names = "gpmi-nand", "bch";
  69                                 interrupts = <13>, <56>;
  70                                 interrupt-names = "gpmi-dma", "bch";
  71                                 clocks = <&clks 34>;
  72                                 clock-names = "gpmi_io";
  73                                 fsl,gpmi-dma-channel = <4>;
  74                                 status = "disabled";
  75                         };
  76
  77                         ssp0: ssp@80010000 {
  78                                 reg = <0x80010000 0x2000>;
  79                                 interrupts = <15 14>;
  80                                 clocks = <&clks 33>;
  81                                 fsl,ssp-dma-channel = <1>;
  82                                 status = "disabled";
  83                         };
  84
  85                         etm@80014000 {
  86                                 reg = <0x80014000 0x2000>;
  87                                 status = "disabled";
  88                         };
  89
  90                         pinctrl@80018000 {
  91                                 #address-cells = <1>;
  92                                 #size-cells = <0>;
  93                                 compatible = "fsl,imx23-pinctrl", "simple-bus";
  94                                 reg = <0x80018000 0x2000>;
  95
  96                                 gpio0: gpio@0 {
  97                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
  98                                         interrupts = <16>;
  99                                         gpio-controller;
 100                                         #gpio-cells = <2>;
 101                                         interrupt-controller;
 102                                         #interrupt-cells = <2>;
 103                                 };
 104
 105                                 gpio1: gpio@1 {
 106                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
 107                                         interrupts = <17>;
 108                                         gpio-controller;
 109                                         #gpio-cells = <2>;
 110                                         interrupt-controller;
 111                                         #interrupt-cells = <2>;
 112                                 };
 113
 114                                 gpio2: gpio@2 {
 115                                         compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
 116                                         interrupts = <18>;
 117                                         gpio-controller;
 118                                         #gpio-cells = <2>;
 119                                         interrupt-controller;
 120                                         #interrupt-cells = <2>;
 121                                 };
 122
 123                                 duart_pins_a: duart@0 {
 124                                         reg = <0>;
 125                                         fsl,pinmux-ids = <
 126                                                 0x11a2 /* MX23_PAD_PWM0__DUART_RX */
 127                                                 0x11b2 /* MX23_PAD_PWM1__DUART_TX */
 128                                         >;
 129                                         fsl,drive-strength = <0>;
 130                                         fsl,voltage = <1>;
 131                                         fsl,pull-up = <0>;
 132                                 };
 133
 134                                 auart0_pins_a: auart0@0 {
 135                                         reg = <0>;
 136                                         fsl,pinmux-ids = <
 137                                                 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
 138                                                 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
 139                                                 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
 140                                                 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
 141                                         >;
 142                                         fsl,drive-strength = <0>;
 143                                         fsl,voltage = <1>;
 144                                         fsl,pull-up = <0>;
 145                                 };
 146
 147                                 auart0_2pins_a: auart0-2pins@0 {
 148                                         reg = <0>;
 149                                         fsl,pinmux-ids = <
 150                                                 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
 151                                                 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
 152                                         >;
 153                                         fsl,drive-strength = <0>;
 154                                         fsl,voltage = <1>;
 155                                         fsl,pull-up = <0>;
 156                                 };
 157
 158                                 gpmi_pins_a: gpmi-nand@0 {
 159                                         reg = <0>;
 160                                         fsl,pinmux-ids = <
 161                                                 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
 162                                                 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
 163                                                 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
 164                                                 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
 165                                                 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
 166                                                 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
 167                                                 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
 168                                                 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
 169                                                 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
 170                                                 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
 171                                                 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
 172                                                 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
 173                                                 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
 174                                                 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
 175                                                 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
 176                                                 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
 177                                                 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
 178                                         >;
 179                                         fsl,drive-strength = <0>;
 180                                         fsl,voltage = <1>;
 181                                         fsl,pull-up = <0>;
 182                                 };
 183
 184                                 gpmi_pins_fixup: gpmi-pins-fixup {
 185                                         fsl,pinmux-ids = <
 186                                                 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
 187                                                 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
 188                                                 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
 189                                         >;
 190                                         fsl,drive-strength = <2>;
 191                                 };
 192
 193                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 194                                         reg = <0>;
 195                                         fsl,pinmux-ids = <
 196                                                 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
 197                                                 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
 198                                                 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 199                                                 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 200                                                 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
 201                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 202                                         >;
 203                                         fsl,drive-strength = <1>;
 204                                         fsl,voltage = <1>;
 205                                         fsl,pull-up = <1>;
 206                                 };
 207
 208                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 209                                         reg = <0>;
 210                                         fsl,pinmux-ids = <
 211                                                 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
 212                                                 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
 213                                                 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 214                                                 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 215                                                 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
 216                                                 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
 217                                                 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
 218                                                 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
 219                                                 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
 220                                                 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 221                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 222                                         >;
 223                                         fsl,drive-strength = <1>;
 224                                         fsl,voltage = <1>;
 225                                         fsl,pull-up = <1>;
 226                                 };
 227
 228                                 mmc0_pins_fixup: mmc0-pins-fixup {
 229                                         fsl,pinmux-ids = <
 230                                                 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 231                                                 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 232                                         >;
 233                                         fsl,pull-up = <0>;
 234                                 };
 235
 236                                 pwm2_pins_a: pwm2@0 {
 237                                         reg = <0>;
 238                                         fsl,pinmux-ids = <
 239                                                 0x11c0 /* MX23_PAD_PWM2__PWM2 */
 240                                         >;
 241                                         fsl,drive-strength = <0>;
 242                                         fsl,voltage = <1>;
 243                                         fsl,pull-up = <0>;
 244                                 };
 245
 246                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 247                                         reg = <0>;
 248                                         fsl,pinmux-ids = <
 249                                                 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
 250                                                 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
 251                                                 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
 252                                                 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
 253                                                 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
 254                                                 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
 255                                                 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
 256                                                 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
 257                                                 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
 258                                                 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
 259                                                 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
 260                                                 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
 261                                                 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
 262                                                 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
 263                                                 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
 264                                                 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
 265                                                 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
 266                                                 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
 267                                                 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
 268                                                 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
 269                                                 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
 270                                                 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
 271                                                 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
 272                                                 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
 273                                                 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
 274                                                 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
 275                                                 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
 276                                                 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
 277                                         >;
 278                                         fsl,drive-strength = <0>;
 279                                         fsl,voltage = <1>;
 280                                         fsl,pull-up = <0>;
 281                                 };
 282                         };
 283
 284                         digctl@8001c000 {
 285                                 reg = <0x8001c000 2000>;
 286                                 status = "disabled";
 287                         };
 288
 289                         emi@80020000 {
 290                                 reg = <0x80020000 0x2000>;
 291                                 status = "disabled";
 292                         };
 293
 294                         dma-apbx@80024000 {
 295                                 compatible = "fsl,imx23-dma-apbx";
 296                                 reg = <0x80024000 0x2000>;
 297                                 clocks = <&clks 16>;
 298                         };
 299
 300                         dcp@80028000 {
 301                                 reg = <0x80028000 0x2000>;
 302                                 status = "disabled";
 303                         };
 304
 305                         pxp@8002a000 {
 306                                 reg = <0x8002a000 0x2000>;
 307                                 status = "disabled";
 308                         };
 309
 310                         ocotp@8002c000 {
 311                                 reg = <0x8002c000 0x2000>;
 312                                 status = "disabled";
 313                         };
 314
 315                         axi-ahb@8002e000 {
 316                                 reg = <0x8002e000 0x2000>;
 317                                 status = "disabled";
 318                         };
 319
 320                         lcdif@80030000 {
 321                                 compatible = "fsl,imx23-lcdif";
 322                                 reg = <0x80030000 2000>;
 323                                 interrupts = <46 45>;
 324                                 clocks = <&clks 38>;
 325                                 status = "disabled";
 326                         };
 327
 328                         ssp1: ssp@80034000 {
 329                                 reg = <0x80034000 0x2000>;
 330                                 interrupts = <2 20>;
 331                                 clocks = <&clks 33>;
 332                                 fsl,ssp-dma-channel = <2>;
 333                                 status = "disabled";
 334                         };
 335
 336                         tvenc@80038000 {
 337                                 reg = <0x80038000 0x2000>;
 338                                 status = "disabled";
 339                         };
 340                 };
 341
 342                 apbx@80040000 {
 343                         compatible = "simple-bus";
 344                         #address-cells = <1>;
 345                         #size-cells = <1>;
 346                         reg = <0x80040000 0x40000>;
 347                         ranges;
 348
 349                         clks: clkctrl@80040000 {
 350                                 compatible = "fsl,imx23-clkctrl";
 351                                 reg = <0x80040000 0x2000>;
 352                                 #clock-cells = <1>;
 353                         };
 354
 355                         saif0: saif@80042000 {
 356                                 reg = <0x80042000 0x2000>;
 357                                 status = "disabled";
 358                         };
 359
 360                         power@80044000 {
 361                                 reg = <0x80044000 0x2000>;
 362                                 status = "disabled";
 363                         };
 364
 365                         saif1: saif@80046000 {
 366                                 reg = <0x80046000 0x2000>;
 367                                 status = "disabled";
 368                         };
 369
 370                         audio-out@80048000 {
 371                                 reg = <0x80048000 0x2000>;
 372                                 status = "disabled";
 373                         };
 374
 375                         audio-in@8004c000 {
 376                                 reg = <0x8004c000 0x2000>;
 377                                 status = "disabled";
 378                         };
 379
 380                         lradc@80050000 {
 381                                 reg = <0x80050000 0x2000>;
 382                                 status = "disabled";
 383                         };
 384
 385                         spdif@80054000 {
 386                                 reg = <0x80054000 2000>;
 387                                 status = "disabled";
 388                         };
 389
 390                         i2c@80058000 {
 391                                 reg = <0x80058000 0x2000>;
 392                                 status = "disabled";
 393                         };
 394
 395                         rtc@8005c000 {
 396                                 compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
 397                                 reg = <0x8005c000 0x2000>;
 398                                 interrupts = <22>;
 399                         };
 400
 401                         pwm: pwm@80064000 {
 402                                 compatible = "fsl,imx23-pwm";
 403                                 reg = <0x80064000 0x2000>;
 404                                 clocks = <&clks 30>;
 405                                 #pwm-cells = <2>;
 406                                 fsl,pwm-number = <5>;
 407                                 status = "disabled";
 408                         };
 409
 410                         timrot@80068000 {
 411                                 compatible = "fsl,imx23-timrot", "fsl,timrot";
 412                                 reg = <0x80068000 0x2000>;
 413                                 interrupts = <28 29 30 31>;
 414                         };
 415
 416                         auart0: serial@8006c000 {
 417                                 compatible = "fsl,imx23-auart";
 418                                 reg = <0x8006c000 0x2000>;
 419                                 interrupts = <24 25 23>;
 420                                 clocks = <&clks 32>;
 421                                 status = "disabled";
 422                         };
 423
 424                         auart1: serial@8006e000 {
 425                                 compatible = "fsl,imx23-auart";
 426                                 reg = <0x8006e000 0x2000>;
 427                                 interrupts = <59 60 58>;
 428                                 clocks = <&clks 32>;
 429                                 status = "disabled";
 430                         };
 431
 432                         duart: serial@80070000 {
 433                                 compatible = "arm,pl011", "arm,primecell";
 434                                 reg = <0x80070000 0x2000>;
 435                                 interrupts = <0>;
 436                                 clocks = <&clks 32>, <&clks 16>;
 437                                 clock-names = "uart", "apb_pclk";
 438                                 status = "disabled";
 439                         };
 440
 441                         usbphy0: usbphy@8007c000 {
 442                                 compatible = "fsl,imx23-usbphy";
 443                                 reg = <0x8007c000 0x2000>;
 444                                 clocks = <&clks 41>;
 445                                 status = "disabled";
 446                         };
 447                 };
 448         };
 449
 450         ahb@80080000 {
 451                 compatible = "simple-bus";
 452                 #address-cells = <1>;
 453                 #size-cells = <1>;
 454                 reg = <0x80080000 0x80000>;
 455                 ranges;
 456
 457                 usb0: usb@80080000 {
 458                         compatible = "fsl,imx23-usb", "fsl,imx27-usb";
 459                         reg = <0x80080000 0x40000>;
 460                         interrupts = <11>;
 461                         fsl,usbphy = <&usbphy0>;
 462                         clocks = <&clks 40>;
 463                         status = "disabled";
 464                 };
 465         };
 466 };