2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "dra74x.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
15 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
18 device_type = "memory";
19 reg = <0x80000000 0x60000000>; /* 1536 MB */
22 mmc2_3v3: fixedregulator-mmc2 {
23 compatible = "regulator-fixed";
24 regulator-name = "mmc2_3v3";
25 regulator-min-microvolt = <3300000>;
26 regulator-max-microvolt = <3300000>;
29 vtt_fixed: fixedregulator-vtt {
30 compatible = "regulator-fixed";
31 regulator-name = "vtt_fixed";
32 regulator-min-microvolt = <1350000>;
33 regulator-max-microvolt = <1350000>;
37 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
42 pinctrl-names = "default";
43 pinctrl-0 = <&vtt_pin>;
45 vtt_pin: pinmux_vtt_pin {
46 pinctrl-single,pins = <
47 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
51 i2c1_pins: pinmux_i2c1_pins {
52 pinctrl-single,pins = <
53 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
54 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
58 i2c2_pins: pinmux_i2c2_pins {
59 pinctrl-single,pins = <
60 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
61 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
65 i2c3_pins: pinmux_i2c3_pins {
66 pinctrl-single,pins = <
67 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
68 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
72 mcspi1_pins: pinmux_mcspi1_pins {
73 pinctrl-single,pins = <
74 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
75 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
76 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
77 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
78 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
79 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
83 mcspi2_pins: pinmux_mcspi2_pins {
84 pinctrl-single,pins = <
85 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
86 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
87 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
88 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
92 uart1_pins: pinmux_uart1_pins {
93 pinctrl-single,pins = <
94 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
95 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
96 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
97 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
101 uart2_pins: pinmux_uart2_pins {
102 pinctrl-single,pins = <
103 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
104 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
105 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
106 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
110 uart3_pins: pinmux_uart3_pins {
111 pinctrl-single,pins = <
112 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
113 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
117 qspi1_pins: pinmux_qspi1_pins {
118 pinctrl-single,pins = <
119 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
120 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
121 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
122 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
123 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
124 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
125 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
126 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
127 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
128 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
132 usb1_pins: pinmux_usb1_pins {
133 pinctrl-single,pins = <
134 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
138 usb2_pins: pinmux_usb2_pins {
139 pinctrl-single,pins = <
140 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
144 nand_flash_x16: nand_flash_x16 {
145 /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
146 * So NAND flash requires following switch settings:
147 * SW5.9 (GPMC_WPN) = LOW
148 * SW5.1 (NAND_BOOTn) = HIGH */
149 pinctrl-single,pins = <
150 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
151 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
152 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
153 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
154 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
155 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
156 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
157 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
158 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
159 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
160 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
161 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
162 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
163 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
164 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
165 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
166 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
167 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
168 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
169 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
170 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
171 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
178 pinctrl-names = "default";
179 pinctrl-0 = <&i2c1_pins>;
180 clock-frequency = <400000>;
182 tps659038: tps659038@58 {
183 compatible = "ti,tps659038";
187 compatible = "ti,tps659038-pmic";
190 smps123_reg: smps123 {
192 regulator-name = "smps123";
193 regulator-min-microvolt = < 850000>;
194 regulator-max-microvolt = <1250000>;
201 regulator-name = "smps45";
202 regulator-min-microvolt = < 850000>;
203 regulator-max-microvolt = <1150000>;
208 /* VDD_GPU - over VDD_SMPS6 */
209 regulator-name = "smps6";
210 regulator-min-microvolt = <850000>;
211 regulator-max-microvolt = <12500000>;
217 regulator-name = "smps7";
218 regulator-min-microvolt = <850000>;
219 regulator-max-microvolt = <1030000>;
226 regulator-name = "smps8";
227 regulator-min-microvolt = < 850000>;
228 regulator-max-microvolt = <1250000>;
234 regulator-name = "smps9";
235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvolt = <1800000>;
242 /* LDO1_OUT --> SDIO */
243 regulator-name = "ldo1";
244 regulator-min-microvolt = <1800000>;
245 regulator-max-microvolt = <3300000>;
251 /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
252 regulator-name = "ldo2";
253 regulator-min-microvolt = <3300000>;
254 regulator-max-microvolt = <3300000>;
260 regulator-name = "ldo3";
261 regulator-min-microvolt = <1800000>;
262 regulator-max-microvolt = <1800000>;
269 regulator-name = "ldo9";
270 regulator-min-microvolt = <1050000>;
271 regulator-max-microvolt = <1050000>;
277 regulator-name = "ldoln";
278 regulator-min-microvolt = <1800000>;
279 regulator-max-microvolt = <1800000>;
285 /* VDDA_3V_USB: VDDA_USBHS33 */
286 regulator-name = "ldousb";
287 regulator-min-microvolt = <3300000>;
288 regulator-max-microvolt = <3300000>;
298 pinctrl-names = "default";
299 pinctrl-0 = <&i2c2_pins>;
300 clock-frequency = <400000>;
305 pinctrl-names = "default";
306 pinctrl-0 = <&i2c3_pins>;
307 clock-frequency = <400000>;
312 pinctrl-names = "default";
313 pinctrl-0 = <&mcspi1_pins>;
318 pinctrl-names = "default";
319 pinctrl-0 = <&mcspi2_pins>;
324 pinctrl-names = "default";
325 pinctrl-0 = <&uart1_pins>;
326 interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
327 <&dra7_pmx_core 0x3e0>;
332 pinctrl-names = "default";
333 pinctrl-0 = <&uart2_pins>;
338 pinctrl-names = "default";
339 pinctrl-0 = <&uart3_pins>;
344 vmmc-supply = <&ldo1_reg>;
350 vmmc-supply = <&mmc2_3v3>;
355 cpu0-supply = <&smps123_reg>;
360 pinctrl-names = "default";
361 pinctrl-0 = <&qspi1_pins>;
363 spi-max-frequency = <48000000>;
365 compatible = "s25fl256s1";
366 spi-max-frequency = <48000000>;
368 spi-tx-bus-width = <1>;
369 spi-rx-bus-width = <4>;
372 #address-cells = <1>;
375 /* MTD partition table.
376 * The ROM checks the first four physical blocks
377 * for a valid file to boot and the flash here is
382 reg = <0x00000000 0x000010000>;
385 label = "QSPI.SPL.backup1";
386 reg = <0x00010000 0x00010000>;
389 label = "QSPI.SPL.backup2";
390 reg = <0x00020000 0x00010000>;
393 label = "QSPI.SPL.backup3";
394 reg = <0x00030000 0x00010000>;
397 label = "QSPI.u-boot";
398 reg = <0x00040000 0x00100000>;
401 label = "QSPI.u-boot-spl-os";
402 reg = <0x00140000 0x00010000>;
405 label = "QSPI.u-boot-env";
406 reg = <0x00150000 0x00010000>;
409 label = "QSPI.u-boot-env.backup1";
410 reg = <0x00160000 0x0010000>;
413 label = "QSPI.kernel";
414 reg = <0x00170000 0x0800000>;
417 label = "QSPI.file-system";
418 reg = <0x00970000 0x01690000>;
424 dr_mode = "peripheral";
425 pinctrl-names = "default";
426 pinctrl-0 = <&usb1_pins>;
431 pinctrl-names = "default";
432 pinctrl-0 = <&usb2_pins>;
441 pinctrl-names = "default";
442 pinctrl-0 = <&nand_flash_x16>;
443 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
445 reg = <0 0 4>; /* device IO registers */
446 ti,nand-ecc-opt = "bch8";
448 nand-bus-width = <16>;
449 gpmc,device-width = <2>;
450 gpmc,sync-clk-ps = <0>;
452 gpmc,cs-rd-off-ns = <80>;
453 gpmc,cs-wr-off-ns = <80>;
454 gpmc,adv-on-ns = <0>;
455 gpmc,adv-rd-off-ns = <60>;
456 gpmc,adv-wr-off-ns = <60>;
457 gpmc,we-on-ns = <10>;
458 gpmc,we-off-ns = <50>;
460 gpmc,oe-off-ns = <40>;
461 gpmc,access-ns = <40>;
462 gpmc,wr-access-ns = <80>;
463 gpmc,rd-cycle-ns = <80>;
464 gpmc,wr-cycle-ns = <80>;
465 gpmc,bus-turnaround-ns = <0>;
466 gpmc,cycle2cycle-delay-ns = <0>;
467 gpmc,clk-activation-ns = <0>;
468 gpmc,wait-monitoring-ns = <0>;
469 gpmc,wr-data-mux-bus-ns = <0>;
470 /* MTD partition table */
471 /* All SPL-* partitions are sized to minimal length
472 * which can be independently programmable. For
473 * NAND flash this is equal to size of erase-block */
474 #address-cells = <1>;
478 reg = <0x00000000 0x000020000>;
481 label = "NAND.SPL.backup1";
482 reg = <0x00020000 0x00020000>;
485 label = "NAND.SPL.backup2";
486 reg = <0x00040000 0x00020000>;
489 label = "NAND.SPL.backup3";
490 reg = <0x00060000 0x00020000>;
493 label = "NAND.u-boot-spl-os";
494 reg = <0x00080000 0x00040000>;
497 label = "NAND.u-boot";
498 reg = <0x000c0000 0x00100000>;
501 label = "NAND.u-boot-env";
502 reg = <0x001c0000 0x00020000>;
505 label = "NAND.u-boot-env.backup1";
506 reg = <0x001e0000 0x00020000>;
509 label = "NAND.kernel";
510 reg = <0x00200000 0x00800000>;
513 label = "NAND.file-system";
514 reg = <0x00a00000 0x0f600000>;
520 phy-supply = <&ldousb_reg>;
524 phy-supply = <&ldousb_reg>;