2 * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
3 * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
4 * AT91SAM9X25, AT91SAM9X35 SoC
6 * Copyright (C) 2012 Atmel,
7 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
9 * Licensed under GPLv2 or later.
12 /include/ "skeleton.dtsi"
15 model = "Atmel AT91SAM9x5 family SoC";
16 compatible = "atmel,at91sam9x5";
17 interrupt-parent = <&aic>;
33 compatible = "arm,arm926ejs";
38 reg = <0x20000000 0x10000000>;
42 compatible = "simple-bus";
48 compatible = "simple-bus";
53 aic: interrupt-controller@fffff000 {
54 #interrupt-cells = <2>;
55 compatible = "atmel,at91rm9200-aic";
57 reg = <0xfffff000 0x200>;
60 ramc0: ramc@ffffe800 {
61 compatible = "atmel,at91sam9g45-ddramc";
62 reg = <0xffffe800 0x200>;
66 compatible = "atmel,at91rm9200-pmc";
67 reg = <0xfffffc00 0x100>;
71 compatible = "atmel,at91sam9g45-rstc";
72 reg = <0xfffffe00 0x10>;
76 compatible = "atmel,at91sam9x5-shdwc";
77 reg = <0xfffffe10 0x10>;
81 compatible = "atmel,at91sam9260-pit";
82 reg = <0xfffffe30 0xf>;
86 tcb0: timer@f8008000 {
87 compatible = "atmel,at91sam9x5-tcb";
88 reg = <0xf8008000 0x100>;
92 tcb1: timer@f800c000 {
93 compatible = "atmel,at91sam9x5-tcb";
94 reg = <0xf800c000 0x100>;
98 dma0: dma-controller@ffffec00 {
99 compatible = "atmel,at91sam9g45-dma";
100 reg = <0xffffec00 0x200>;
104 dma1: dma-controller@ffffee00 {
105 compatible = "atmel,at91sam9g45-dma";
106 reg = <0xffffee00 0x200>;
110 pioA: gpio@fffff400 {
111 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
112 reg = <0xfffff400 0x100>;
116 interrupt-controller;
119 pioB: gpio@fffff600 {
120 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
121 reg = <0xfffff600 0x100>;
125 interrupt-controller;
128 pioC: gpio@fffff800 {
129 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
130 reg = <0xfffff800 0x100>;
134 interrupt-controller;
137 pioD: gpio@fffffa00 {
138 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
139 reg = <0xfffffa00 0x100>;
143 interrupt-controller;
146 dbgu: serial@fffff200 {
147 compatible = "atmel,at91sam9260-usart";
148 reg = <0xfffff200 0x200>;
153 usart0: serial@f801c000 {
154 compatible = "atmel,at91sam9260-usart";
155 reg = <0xf801c000 0x200>;
162 usart1: serial@f8020000 {
163 compatible = "atmel,at91sam9260-usart";
164 reg = <0xf8020000 0x200>;
171 usart2: serial@f8024000 {
172 compatible = "atmel,at91sam9260-usart";
173 reg = <0xf8024000 0x200>;
180 macb0: ethernet@f802c000 {
181 compatible = "cdns,at32ap7000-macb", "cdns,macb";
182 reg = <0xf802c000 0x100>;
187 macb1: ethernet@f8030000 {
188 compatible = "cdns,at32ap7000-macb", "cdns,macb";
189 reg = <0xf8030000 0x100>;
195 compatible = "atmel,at91sam9260-adc";
196 reg = <0xf804c000 0x100>;
198 atmel,adc-use-external;
199 atmel,adc-channels-used = <0xffff>;
200 atmel,adc-vref = <3300>;
201 atmel,adc-num-channels = <12>;
202 atmel,adc-startup-time = <40>;
203 atmel,adc-channel-base = <0x50>;
204 atmel,adc-drdy-mask = <0x1000000>;
205 atmel,adc-status-register = <0x30>;
206 atmel,adc-trigger-register = <0xc0>;
209 trigger-name = "external-rising";
210 trigger-value = <0x1>;
215 trigger-name = "external-falling";
216 trigger-value = <0x2>;
221 trigger-name = "external-any";
222 trigger-value = <0x3>;
227 trigger-name = "continuous";
228 trigger-value = <0x6>;
233 nand0: nand@40000000 {
234 compatible = "atmel,at91rm9200-nand";
235 #address-cells = <1>;
237 reg = <0x40000000 0x10000000
239 atmel,nand-addr-offset = <21>;
240 atmel,nand-cmd-offset = <22>;
248 usb0: ohci@00600000 {
249 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
250 reg = <0x00600000 0x100000>;
255 usb1: ehci@00700000 {
256 compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
257 reg = <0x00700000 0x100000>;
264 compatible = "i2c-gpio";
265 gpios = <&pioA 30 0 /* sda */
268 i2c-gpio,sda-open-drain;
269 i2c-gpio,scl-open-drain;
270 i2c-gpio,delay-us = <2>; /* ~100 kHz */
271 #address-cells = <1>;
277 compatible = "i2c-gpio";
278 gpios = <&pioC 0 0 /* sda */
281 i2c-gpio,sda-open-drain;
282 i2c-gpio,scl-open-drain;
283 i2c-gpio,delay-us = <2>; /* ~100 kHz */
284 #address-cells = <1>;
290 compatible = "i2c-gpio";
291 gpios = <&pioB 4 0 /* sda */
294 i2c-gpio,sda-open-drain;
295 i2c-gpio,scl-open-drain;
296 i2c-gpio,delay-us = <2>; /* ~100 kHz */
297 #address-cells = <1>;