2 * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6 * Licensed under GPLv2 only.
9 /include/ "skeleton.dtsi"
12 model = "Atmel AT91SAM9263 family SoC";
13 compatible = "atmel,at91sam9263";
14 interrupt-parent = <&aic>;
36 compatible = "arm,arm926ej-s";
42 reg = <0x20000000 0x08000000>;
46 compatible = "simple-bus";
52 compatible = "simple-bus";
57 aic: interrupt-controller@fffff000 {
58 #interrupt-cells = <3>;
59 compatible = "atmel,at91rm9200-aic";
61 reg = <0xfffff000 0x200>;
62 atmel,external-irqs = <30 31>;
66 compatible = "atmel,at91rm9200-pmc";
67 reg = <0xfffffc00 0x100>;
71 compatible = "atmel,at91sam9260-sdramc";
72 reg = <0xffffe200 0x200
77 compatible = "atmel,at91sam9260-pit";
78 reg = <0xfffffd30 0xf>;
82 tcb0: timer@fff7c000 {
83 compatible = "atmel,at91rm9200-tcb";
84 reg = <0xfff7c000 0x100>;
85 interrupts = <19 4 0>;
89 compatible = "atmel,at91sam9260-rstc";
90 reg = <0xfffffd00 0x10>;
94 compatible = "atmel,at91sam9260-shdwc";
95 reg = <0xfffffd10 0x10>;
101 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
102 ranges = <0xfffff200 0xfffff200 0xa00>;
106 0xfffffffb 0xffffe07f /* pioA */
107 0x0007ffff 0x39072fff /* pioB */
108 0xffffffff 0x3ffffff8 /* pioC */
109 0xfffffbff 0xffffffff /* pioD */
110 0xffe00fff 0xfbfcff00 /* pioE */
113 /* shared pinctrl settings */
115 pinctrl_dbgu: dbgu-0 {
117 <2 30 0x1 0x0 /* PC30 periph A */
118 2 31 0x1 0x1>; /* PC31 periph with pullup */
123 pinctrl_usart0: usart0-0 {
125 <0 26 0x1 0x1 /* PA26 periph A with pullup */
126 0 27 0x1 0x0>; /* PA27 periph A */
129 pinctrl_usart0_rts: usart0_rts-0 {
131 <0 28 0x1 0x0>; /* PA28 periph A */
134 pinctrl_usart0_cts: usart0_cts-0 {
136 <0 29 0x1 0x0>; /* PA29 periph A */
141 pinctrl_usart1: usart1-0 {
143 <3 0 0x1 0x1 /* PD0 periph A with pullup */
144 3 1 0x1 0x0>; /* PD1 periph A */
147 pinctrl_usart1_rts: usart1_rts-0 {
149 <3 7 0x2 0x0>; /* PD7 periph B */
152 pinctrl_usart1_cts: usart1_cts-0 {
154 <3 8 0x2 0x0>; /* PD8 periph B */
159 pinctrl_usart2: usart2-0 {
161 <3 2 0x1 0x1 /* PD2 periph A with pullup */
162 3 3 0x1 0x0>; /* PD3 periph A */
165 pinctrl_usart2_rts: usart2_rts-0 {
167 <3 5 0x2 0x0>; /* PD5 periph B */
170 pinctrl_usart2_cts: usart2_cts-0 {
172 <4 6 0x2 0x0>; /* PD6 periph B */
177 pinctrl_nand: nand-0 {
179 <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/
180 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */
185 pinctrl_macb_rmii: macb_rmii-0 {
187 <2 25 0x2 0x0 /* PC25 periph B */
188 4 21 0x1 0x0 /* PE21 periph A */
189 4 23 0x1 0x0 /* PE23 periph A */
190 4 24 0x1 0x0 /* PE24 periph A */
191 4 25 0x1 0x0 /* PE25 periph A */
192 4 26 0x1 0x0 /* PE26 periph A */
193 4 27 0x1 0x0 /* PE27 periph A */
194 4 28 0x1 0x0 /* PE28 periph A */
195 4 29 0x1 0x0 /* PE29 periph A */
196 4 30 0x1 0x0>; /* PE30 periph A */
199 pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
201 <2 20 0x2 0x0 /* PC20 periph B */
202 2 21 0x2 0x0 /* PC21 periph B */
203 2 22 0x2 0x0 /* PC22 periph B */
204 2 23 0x2 0x0 /* PC23 periph B */
205 2 24 0x2 0x0 /* PC24 periph B */
206 2 25 0x2 0x0 /* PC25 periph B */
207 2 27 0x2 0x0 /* PC27 periph B */
208 4 22 0x2 0x0>; /* PE22 periph B */
213 pinctrl_mmc0_clk: mmc0_clk-0 {
215 <0 12 0x1 0x0>; /* PA12 periph A */
218 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
220 <0 1 0x1 0x1 /* PA1 periph A with pullup */
221 0 0 0x1 0x1>; /* PA0 periph A with pullup */
224 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
226 <0 3 0x1 0x1 /* PA3 periph A with pullup */
227 0 4 0x1 0x1 /* PA4 periph A with pullup */
228 0 5 0x1 0x1>; /* PA5 periph A with pullup */
231 pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
233 <0 16 0x1 0x1 /* PA16 periph A with pullup */
234 0 17 0x1 0x1>; /* PA17 periph A with pullup */
237 pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
239 <0 18 0x1 0x1 /* PA18 periph A with pullup */
240 0 19 0x1 0x1 /* PA19 periph A with pullup */
241 0 20 0x1 0x1>; /* PA20 periph A with pullup */
246 pinctrl_mmc1_clk: mmc1_clk-0 {
248 <0 6 0x1 0x0>; /* PA6 periph A */
251 pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
253 <0 7 0x1 0x1 /* PA7 periph A with pullup */
254 0 8 0x1 0x1>; /* PA8 periph A with pullup */
257 pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
259 <0 9 0x1 0x1 /* PA9 periph A with pullup */
260 0 10 0x1 0x1 /* PA10 periph A with pullup */
261 0 11 0x1 0x1>; /* PA11 periph A with pullup */
264 pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
266 <0 21 0x1 0x1 /* PA21 periph A with pullup */
267 0 22 0x1 0x1>; /* PA22 periph A with pullup */
270 pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
272 <0 23 0x1 0x1 /* PA23 periph A with pullup */
273 0 24 0x1 0x1 /* PA24 periph A with pullup */
274 0 25 0x1 0x1>; /* PA25 periph A with pullup */
279 pinctrl_ssc0_tx: ssc0_tx-0 {
281 <1 0 0x2 0x0 /* PB0 periph B */
282 1 1 0x2 0x0 /* PB1 periph B */
283 1 2 0x2 0x0>; /* PB2 periph B */
286 pinctrl_ssc0_rx: ssc0_rx-0 {
288 <1 3 0x2 0x0 /* PB3 periph B */
289 1 4 0x2 0x0 /* PB4 periph B */
290 1 5 0x2 0x0>; /* PB5 periph B */
295 pinctrl_ssc1_tx: ssc1_tx-0 {
297 <1 6 0x1 0x0 /* PB6 periph A */
298 1 7 0x1 0x0 /* PB7 periph A */
299 1 8 0x1 0x0>; /* PB8 periph A */
302 pinctrl_ssc1_rx: ssc1_rx-0 {
304 <1 9 0x1 0x0 /* PB9 periph A */
305 1 10 0x1 0x0 /* PB10 periph A */
306 1 11 0x1 0x0>; /* PB11 periph A */
311 pinctrl_spi0: spi0-0 {
313 <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */
314 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */
315 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */
320 pinctrl_spi1: spi1-0 {
322 <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */
323 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */
324 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */
328 pioA: gpio@fffff200 {
329 compatible = "atmel,at91rm9200-gpio";
330 reg = <0xfffff200 0x200>;
331 interrupts = <2 4 1>;
334 interrupt-controller;
335 #interrupt-cells = <2>;
338 pioB: gpio@fffff400 {
339 compatible = "atmel,at91rm9200-gpio";
340 reg = <0xfffff400 0x200>;
341 interrupts = <3 4 1>;
344 interrupt-controller;
345 #interrupt-cells = <2>;
348 pioC: gpio@fffff600 {
349 compatible = "atmel,at91rm9200-gpio";
350 reg = <0xfffff600 0x200>;
351 interrupts = <4 4 1>;
354 interrupt-controller;
355 #interrupt-cells = <2>;
358 pioD: gpio@fffff800 {
359 compatible = "atmel,at91rm9200-gpio";
360 reg = <0xfffff800 0x200>;
361 interrupts = <4 4 1>;
364 interrupt-controller;
365 #interrupt-cells = <2>;
368 pioE: gpio@fffffa00 {
369 compatible = "atmel,at91rm9200-gpio";
370 reg = <0xfffffa00 0x200>;
371 interrupts = <4 4 1>;
374 interrupt-controller;
375 #interrupt-cells = <2>;
379 dbgu: serial@ffffee00 {
380 compatible = "atmel,at91sam9260-usart";
381 reg = <0xffffee00 0x200>;
382 interrupts = <1 4 7>;
383 pinctrl-names = "default";
384 pinctrl-0 = <&pinctrl_dbgu>;
388 usart0: serial@fff8c000 {
389 compatible = "atmel,at91sam9260-usart";
390 reg = <0xfff8c000 0x200>;
391 interrupts = <7 4 5>;
394 pinctrl-names = "default";
395 pinctrl-0 = <&pinctrl_usart0>;
399 usart1: serial@fff90000 {
400 compatible = "atmel,at91sam9260-usart";
401 reg = <0xfff90000 0x200>;
402 interrupts = <8 4 5>;
405 pinctrl-names = "default";
406 pinctrl-0 = <&pinctrl_usart1>;
410 usart2: serial@fff94000 {
411 compatible = "atmel,at91sam9260-usart";
412 reg = <0xfff94000 0x200>;
413 interrupts = <9 4 5>;
416 pinctrl-names = "default";
417 pinctrl-0 = <&pinctrl_usart2>;
422 compatible = "atmel,at91rm9200-ssc";
423 reg = <0xfff98000 0x4000>;
424 interrupts = <16 4 5>;
425 pinctrl-names = "default";
426 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
431 compatible = "atmel,at91rm9200-ssc";
432 reg = <0xfff9c000 0x4000>;
433 interrupts = <17 4 5>;
434 pinctrl-names = "default";
435 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
439 macb0: ethernet@fffbc000 {
440 compatible = "cdns,at32ap7000-macb", "cdns,macb";
441 reg = <0xfffbc000 0x100>;
442 interrupts = <21 4 3>;
443 pinctrl-names = "default";
444 pinctrl-0 = <&pinctrl_macb_rmii>;
448 usb1: gadget@fff78000 {
449 compatible = "atmel,at91rm9200-udc";
450 reg = <0xfff78000 0x4000>;
451 interrupts = <24 4 2>;
456 compatible = "atmel,at91sam9263-i2c";
457 reg = <0xfff88000 0x100>;
458 interrupts = <13 4 6>;
459 #address-cells = <1>;
465 compatible = "atmel,hsmci";
466 reg = <0xfff80000 0x600>;
467 interrupts = <10 4 0>;
468 #address-cells = <1>;
474 compatible = "atmel,hsmci";
475 reg = <0xfff84000 0x600>;
476 interrupts = <11 4 0>;
477 #address-cells = <1>;
483 compatible = "atmel,at91sam9260-wdt";
484 reg = <0xfffffd40 0x10>;
489 #address-cells = <1>;
491 compatible = "atmel,at91rm9200-spi";
492 reg = <0xfffa4000 0x200>;
493 interrupts = <14 4 3>;
494 pinctrl-names = "default";
495 pinctrl-0 = <&pinctrl_spi0>;
500 #address-cells = <1>;
502 compatible = "atmel,at91rm9200-spi";
503 reg = <0xfffa8000 0x200>;
504 interrupts = <15 4 3>;
505 pinctrl-names = "default";
506 pinctrl-0 = <&pinctrl_spi1>;
511 nand0: nand@40000000 {
512 compatible = "atmel,at91rm9200-nand";
513 #address-cells = <1>;
515 reg = <0x40000000 0x10000000
518 atmel,nand-addr-offset = <21>;
519 atmel,nand-cmd-offset = <22>;
520 pinctrl-names = "default";
521 pinctrl-0 = <&pinctrl_nand>;
529 usb0: ohci@00a00000 {
530 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
531 reg = <0x00a00000 0x100000>;
532 interrupts = <29 4 2>;
538 compatible = "i2c-gpio";
539 gpios = <&pioB 4 0 /* sda */
542 i2c-gpio,sda-open-drain;
543 i2c-gpio,scl-open-drain;
544 i2c-gpio,delay-us = <2>; /* ~100 kHz */
545 #address-cells = <1>;