2 * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
4 * Copyright (C) 2011 Atmel,
5 * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
6 * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8 * Licensed under GPLv2 or later.
11 /include/ "skeleton.dtsi"
14 model = "Atmel AT91SAM9260 family SoC";
15 compatible = "atmel,at91sam9260";
16 interrupt-parent = <&aic>;
34 compatible = "arm,arm926ejs";
39 reg = <0x20000000 0x04000000>;
43 compatible = "simple-bus";
49 compatible = "simple-bus";
54 aic: interrupt-controller@fffff000 {
55 #interrupt-cells = <2>;
56 compatible = "atmel,at91rm9200-aic";
58 reg = <0xfffff000 0x200>;
61 ramc0: ramc@ffffea00 {
62 compatible = "atmel,at91sam9260-sdramc";
63 reg = <0xffffea00 0x200>;
67 compatible = "atmel,at91rm9200-pmc";
68 reg = <0xfffffc00 0x100>;
72 compatible = "atmel,at91sam9260-rstc";
73 reg = <0xfffffd00 0x10>;
77 compatible = "atmel,at91sam9260-shdwc";
78 reg = <0xfffffd10 0x10>;
82 compatible = "atmel,at91sam9260-pit";
83 reg = <0xfffffd30 0xf>;
87 tcb0: timer@fffa0000 {
88 compatible = "atmel,at91rm9200-tcb";
89 reg = <0xfffa0000 0x100>;
90 interrupts = <17 4 18 4 19 4>;
93 tcb1: timer@fffdc000 {
94 compatible = "atmel,at91rm9200-tcb";
95 reg = <0xfffdc000 0x100>;
96 interrupts = <26 4 27 4 28 4>;
100 compatible = "atmel,at91rm9200-gpio";
101 reg = <0xfffff400 0x100>;
105 interrupt-controller;
108 pioB: gpio@fffff600 {
109 compatible = "atmel,at91rm9200-gpio";
110 reg = <0xfffff600 0x100>;
114 interrupt-controller;
117 pioC: gpio@fffff800 {
118 compatible = "atmel,at91rm9200-gpio";
119 reg = <0xfffff800 0x100>;
123 interrupt-controller;
126 dbgu: serial@fffff200 {
127 compatible = "atmel,at91sam9260-usart";
128 reg = <0xfffff200 0x200>;
133 usart0: serial@fffb0000 {
134 compatible = "atmel,at91sam9260-usart";
135 reg = <0xfffb0000 0x200>;
142 usart1: serial@fffb4000 {
143 compatible = "atmel,at91sam9260-usart";
144 reg = <0xfffb4000 0x200>;
151 usart2: serial@fffb8000 {
152 compatible = "atmel,at91sam9260-usart";
153 reg = <0xfffb8000 0x200>;
160 usart3: serial@fffd0000 {
161 compatible = "atmel,at91sam9260-usart";
162 reg = <0xfffd0000 0x200>;
169 usart4: serial@fffd4000 {
170 compatible = "atmel,at91sam9260-usart";
171 reg = <0xfffd4000 0x200>;
178 usart5: serial@fffd8000 {
179 compatible = "atmel,at91sam9260-usart";
180 reg = <0xfffd8000 0x200>;
187 macb0: ethernet@fffc4000 {
188 compatible = "cdns,at32ap7000-macb", "cdns,macb";
189 reg = <0xfffc4000 0x100>;
194 usb1: gadget@fffa4000 {
195 compatible = "atmel,at91rm9200-udc";
196 reg = <0xfffa4000 0x4000>;
202 compatible = "atmel,at91sam9260-adc";
203 reg = <0xfffe0000 0x100>;
205 atmel,adc-use-external-triggers;
206 atmel,adc-channels-used = <0xf>;
207 atmel,adc-vref = <3300>;
208 atmel,adc-num-channels = <4>;
209 atmel,adc-startup-time = <15>;
210 atmel,adc-channel-base = <0x30>;
211 atmel,adc-drdy-mask = <0x10000>;
212 atmel,adc-status-register = <0x1c>;
213 atmel,adc-trigger-register = <0x04>;
216 trigger-name = "timer-counter-0";
217 trigger-value = <0x1>;
220 trigger-name = "timer-counter-1";
221 trigger-value = <0x3>;
225 trigger-name = "timer-counter-2";
226 trigger-value = <0x5>;
230 trigger-name = "external";
231 trigger-value = <0x13>;
237 nand0: nand@40000000 {
238 compatible = "atmel,at91rm9200-nand";
239 #address-cells = <1>;
241 reg = <0x40000000 0x10000000
244 atmel,nand-addr-offset = <21>;
245 atmel,nand-cmd-offset = <22>;
253 usb0: ohci@00500000 {
254 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
255 reg = <0x00500000 0x100000>;
262 compatible = "i2c-gpio";
263 gpios = <&pioA 23 0 /* sda */
266 i2c-gpio,sda-open-drain;
267 i2c-gpio,scl-open-drain;
268 i2c-gpio,delay-us = <2>; /* ~100 kHz */
269 #address-cells = <1>;