arch/arm/boot/dts/armada-xp-mv78260.dtsi

   1 /*
   2  * Device Tree Include file for Marvell Armada XP family SoC
   3  *
   4  * Copyright (C) 2012 Marvell
   5  *
   6  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   7  *
   8  * This file is licensed under the terms of the GNU General Public
   9  * License version 2.  This program is licensed "as is" without any
  10  * warranty of any kind, whether express or implied.
  11  *
  12  * Contains definitions specific to the Armada XP MV78260 SoC that are not
  13  * common to all Armada XP SoCs.
  14  */
  15
  16 #include "armada-xp.dtsi"
  17
  18 / {
  19         model = "Marvell Armada XP MV78260 SoC";
  20         compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
  21
  22         aliases {
  23                 gpio0 = &gpio0;
  24                 gpio1 = &gpio1;
  25                 gpio2 = &gpio2;
  26                 eth3 = &eth3;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 enable-method = "marvell,armada-xp-smp";
  33
  34                 cpu@0 {
  35                         device_type = "cpu";
  36                         compatible = "marvell,sheeva-v7";
  37                         reg = <0>;
  38                         clocks = <&cpuclk 0>;
  39                 };
  40
  41                 cpu@1 {
  42                         device_type = "cpu";
  43                         compatible = "marvell,sheeva-v7";
  44                         reg = <1>;
  45                         clocks = <&cpuclk 1>;
  46                 };
  47         };
  48
  49         soc {
  50                 /*
  51                  * MV78260 has 3 PCIe units Gen2.0: Two units can be
  52                  * configured as x4 or quad x1 lanes. One unit is
  53                  * x4 only.
  54                  */
  55                 pcie-controller {
  56                         compatible = "marvell,armada-xp-pcie";
  57                         status = "disabled";
  58                         device_type = "pci";
  59
  60                         #address-cells = <3>;
  61                         #size-cells = <2>;
  62
  63                         msi-parent = <&mpic>;
  64                         bus-range = <0x00 0xff>;
  65
  66                         ranges =
  67                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
  68                                 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
  69                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
  70                                 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
  71                                 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
  72                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
  73                                 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
  74                                 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
  75                                 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
  76                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
  77                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
  78                                 0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
  79                                 0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
  80                                 0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
  81                                 0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
  82                                 0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
  83                                 0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
  84
  85                                 0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
  86                                 0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
  87                                 0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
  88                                 0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
  89                                 0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
  90                                 0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
  91                                 0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
  92                                 0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
  93
  94                                 0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
  95                                 0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
  96
  97                         pcie@1,0 {
  98                                 device_type = "pci";
  99                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 100                                 reg = <0x0800 0 0 0 0>;
 101                                 #address-cells = <3>;
 102                                 #size-cells = <2>;
 103                                 #interrupt-cells = <1>;
 104                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 105                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 106                                 interrupt-map-mask = <0 0 0 0>;
 107                                 interrupt-map = <0 0 0 0 &mpic 58>;
 108                                 marvell,pcie-port = <0>;
 109                                 marvell,pcie-lane = <0>;
 110                                 clocks = <&gateclk 5>;
 111                                 status = "disabled";
 112                         };
 113
 114                         pcie@2,0 {
 115                                 device_type = "pci";
 116                                 assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 117                                 reg = <0x1000 0 0 0 0>;
 118                                 #address-cells = <3>;
 119                                 #size-cells = <2>;
 120                                 #interrupt-cells = <1>;
 121                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 122                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 123                                 interrupt-map-mask = <0 0 0 0>;
 124                                 interrupt-map = <0 0 0 0 &mpic 59>;
 125                                 marvell,pcie-port = <0>;
 126                                 marvell,pcie-lane = <1>;
 127                                 clocks = <&gateclk 6>;
 128                                 status = "disabled";
 129                         };
 130
 131                         pcie@3,0 {
 132                                 device_type = "pci";
 133                                 assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 134                                 reg = <0x1800 0 0 0 0>;
 135                                 #address-cells = <3>;
 136                                 #size-cells = <2>;
 137                                 #interrupt-cells = <1>;
 138                                 ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 139                                           0x81000000 0 0 0x81000000 0x3 0 1 0>;
 140                                 interrupt-map-mask = <0 0 0 0>;
 141                                 interrupt-map = <0 0 0 0 &mpic 60>;
 142                                 marvell,pcie-port = <0>;
 143                                 marvell,pcie-lane = <2>;
 144                                 clocks = <&gateclk 7>;
 145                                 status = "disabled";
 146                         };
 147
 148                         pcie@4,0 {
 149                                 device_type = "pci";
 150                                 assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 151                                 reg = <0x2000 0 0 0 0>;
 152                                 #address-cells = <3>;
 153                                 #size-cells = <2>;
 154                                 #interrupt-cells = <1>;
 155                                 ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 156                                           0x81000000 0 0 0x81000000 0x4 0 1 0>;
 157                                 interrupt-map-mask = <0 0 0 0>;
 158                                 interrupt-map = <0 0 0 0 &mpic 61>;
 159                                 marvell,pcie-port = <0>;
 160                                 marvell,pcie-lane = <3>;
 161                                 clocks = <&gateclk 8>;
 162                                 status = "disabled";
 163                         };
 164
 165                         pcie@5,0 {
 166                                 device_type = "pci";
 167                                 assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 168                                 reg = <0x2800 0 0 0 0>;
 169                                 #address-cells = <3>;
 170                                 #size-cells = <2>;
 171                                 #interrupt-cells = <1>;
 172                                 ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 173                                           0x81000000 0 0 0x81000000 0x5 0 1 0>;
 174                                 interrupt-map-mask = <0 0 0 0>;
 175                                 interrupt-map = <0 0 0 0 &mpic 62>;
 176                                 marvell,pcie-port = <1>;
 177                                 marvell,pcie-lane = <0>;
 178                                 clocks = <&gateclk 9>;
 179                                 status = "disabled";
 180                         };
 181
 182                         pcie@6,0 {
 183                                 device_type = "pci";
 184                                 assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
 185                                 reg = <0x3000 0 0 0 0>;
 186                                 #address-cells = <3>;
 187                                 #size-cells = <2>;
 188                                 #interrupt-cells = <1>;
 189                                 ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 190                                           0x81000000 0 0 0x81000000 0x6 0 1 0>;
 191                                 interrupt-map-mask = <0 0 0 0>;
 192                                 interrupt-map = <0 0 0 0 &mpic 63>;
 193                                 marvell,pcie-port = <1>;
 194                                 marvell,pcie-lane = <1>;
 195                                 clocks = <&gateclk 10>;
 196                                 status = "disabled";
 197                         };
 198
 199                         pcie@7,0 {
 200                                 device_type = "pci";
 201                                 assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
 202                                 reg = <0x3800 0 0 0 0>;
 203                                 #address-cells = <3>;
 204                                 #size-cells = <2>;
 205                                 #interrupt-cells = <1>;
 206                                 ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 207                                           0x81000000 0 0 0x81000000 0x7 0 1 0>;
 208                                 interrupt-map-mask = <0 0 0 0>;
 209                                 interrupt-map = <0 0 0 0 &mpic 64>;
 210                                 marvell,pcie-port = <1>;
 211                                 marvell,pcie-lane = <2>;
 212                                 clocks = <&gateclk 11>;
 213                                 status = "disabled";
 214                         };
 215
 216                         pcie@8,0 {
 217                                 device_type = "pci";
 218                                 assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
 219                                 reg = <0x4000 0 0 0 0>;
 220                                 #address-cells = <3>;
 221                                 #size-cells = <2>;
 222                                 #interrupt-cells = <1>;
 223                                 ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 224                                           0x81000000 0 0 0x81000000 0x8 0 1 0>;
 225                                 interrupt-map-mask = <0 0 0 0>;
 226                                 interrupt-map = <0 0 0 0 &mpic 65>;
 227                                 marvell,pcie-port = <1>;
 228                                 marvell,pcie-lane = <3>;
 229                                 clocks = <&gateclk 12>;
 230                                 status = "disabled";
 231                         };
 232
 233                         pcie@9,0 {
 234                                 device_type = "pci";
 235                                 assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
 236                                 reg = <0x4800 0 0 0 0>;
 237                                 #address-cells = <3>;
 238                                 #size-cells = <2>;
 239                                 #interrupt-cells = <1>;
 240                                 ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 241                                           0x81000000 0 0 0x81000000 0x9 0 1 0>;
 242                                 interrupt-map-mask = <0 0 0 0>;
 243                                 interrupt-map = <0 0 0 0 &mpic 99>;
 244                                 marvell,pcie-port = <2>;
 245                                 marvell,pcie-lane = <0>;
 246                                 clocks = <&gateclk 26>;
 247                                 status = "disabled";
 248                         };
 249                 };
 250
 251                 internal-regs {
 252                         pinctrl {
 253                                 compatible = "marvell,mv78260-pinctrl";
 254                                 reg = <0x18000 0x38>;
 255
 256                                 sdio_pins: sdio-pins {
 257                                         marvell,pins = "mpp30", "mpp31", "mpp32",
 258                                                        "mpp33", "mpp34", "mpp35";
 259                                         marvell,function = "sd0";
 260                                 };
 261                         };
 262
 263                         gpio0: gpio@18100 {
 264                                 compatible = "marvell,orion-gpio";
 265                                 reg = <0x18100 0x40>;
 266                                 ngpios = <32>;
 267                                 gpio-controller;
 268                                 #gpio-cells = <2>;
 269                                 interrupt-controller;
 270                                 #interrupt-cells = <2>;
 271                                 interrupts = <82>, <83>, <84>, <85>;
 272                         };
 273
 274                         gpio1: gpio@18140 {
 275                                 compatible = "marvell,orion-gpio";
 276                                 reg = <0x18140 0x40>;
 277                                 ngpios = <32>;
 278                                 gpio-controller;
 279                                 #gpio-cells = <2>;
 280                                 interrupt-controller;
 281                                 #interrupt-cells = <2>;
 282                                 interrupts = <87>, <88>, <89>, <90>;
 283                         };
 284
 285                         gpio2: gpio@18180 {
 286                                 compatible = "marvell,orion-gpio";
 287                                 reg = <0x18180 0x40>;
 288                                 ngpios = <3>;
 289                                 gpio-controller;
 290                                 #gpio-cells = <2>;
 291                                 interrupt-controller;
 292                                 #interrupt-cells = <2>;
 293                                 interrupts = <91>;
 294                         };
 295
 296                         eth3: ethernet@34000 {
 297                                 compatible = "marvell,armada-370-neta";
 298                                 reg = <0x34000 0x4000>;
 299                                 interrupts = <14>;
 300                                 clocks = <&gateclk 1>;
 301                                 status = "disabled";
 302                         };
 303                 };
 304         };
 305 };