Merge branch 'for-linville' of git://github.com/kvalo/ath
[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / animeo_ip.dts
1 /*
2  * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
3  *
4  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5  *
6  * Licensed under GPLv2 only.
7  */
8
9 /dts-v1/;
10 #include "at91sam9260.dtsi"
11
12 / {
13         model = "Somfy Animeo IP";
14         compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
15
16         aliases {
17                 serial0 = &usart1;
18                 serial1 = &usart2;
19                 serial2 = &usart0;
20                 serial3 = &dbgu;
21                 serial4 = &usart3;
22                 serial5 = &uart0;
23                 serial6 = &uart1;
24         };
25
26         chosen {
27                 linux,stdout-path = &usart2;
28         };
29
30         memory {
31                 reg = <0x20000000 0x4000000>;
32         };
33
34         clocks {
35                 #address-cells = <1>;
36                 #size-cells = <1>;
37                 ranges;
38
39                 main_clock: clock@0 {
40                         compatible = "atmel,osc", "fixed-clock";
41                         clock-frequency = <18432000>;
42                 };
43         };
44
45         ahb {
46                 apb {
47                         usart0: serial@fffb0000 {
48                                 pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
49                                 linux,rs485-enabled-at-boot-time;
50                                 status = "okay";
51                         };
52
53                         usart1: serial@fffb4000 {
54                                 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
55                                 linux,rs485-enabled-at-boot-time;
56                                 status = "okay";
57                         };
58
59                         usart2: serial@fffb8000 {
60                                 pinctrl-0 = <&pinctrl_usart2>;
61                                 status = "okay";
62                         };
63
64                         macb0: ethernet@fffc4000 {
65                                 pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
66                                 phy-mode = "mii";
67                                 status = "okay";
68                         };
69
70                         mmc0: mmc@fffa8000 {
71                                 pinctrl-0 = <&pinctrl_mmc0_clk
72                                              &pinctrl_mmc0_slot1_cmd_dat0
73                                              &pinctrl_mmc0_slot1_dat1_3>;
74                                 status = "okay";
75
76                                 slot@1 {
77                                         reg = <1>;
78                                         bus-width = <4>;
79                                 };
80                         };
81
82                         watchdog@fffffd40 {
83                                 status = "okay";
84                         };
85                 };
86
87                 nand0: nand@40000000 {
88                         nand-bus-width = <8>;
89                         nand-ecc-mode = "soft";
90                         nand-on-flash-bbt;
91                         status = "okay";
92
93                         barebox@0 {
94                                 label = "barebox";
95                                 reg = <0x0 0x58000>;
96                         };
97
98                         u_boot_env@58000 {
99                                 label = "u_boot_env";
100                                 reg = <0x58000 0x8000>;
101                         };
102
103                         ubi@60000 {
104                                 label = "ubi";
105                                 reg = <0x60000 0x1FA0000>;
106                         };
107                 };
108
109                 usb0: ohci@00500000 {
110                         num-ports = <2>;
111                         atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
112                         status = "okay";
113                 };
114         };
115
116         leds {
117                 compatible = "gpio-leds";
118
119                 power_green {
120                         label = "power_green";
121                         gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
122                         linux,default-trigger = "heartbeat";
123                 };
124
125                 power_red {
126                         label = "power_red";
127                         gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
128                 };
129
130                 tx_green {
131                         label = "tx_green";
132                         gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
133                 };
134
135                 tx_red {
136                         label = "tx_red";
137                         gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
138                 };
139         };
140
141         gpio_keys {
142                 compatible = "gpio-keys";
143                 #address-cells = <1>;
144                 #size-cells = <0>;
145
146                 keyswitch_in {
147                         label = "keyswitch_in";
148                         gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
149                         linux,code = <28>;
150                         gpio-key,wakeup;
151                 };
152
153                 error_in {
154                         label = "error_in";
155                         gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
156                         linux,code = <29>;
157                         gpio-key,wakeup;
158                 };
159
160                 btn {
161                         label = "btn";
162                         gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
163                         linux,code = <31>;
164                         gpio-key,wakeup;
165                 };
166         };
167 };