2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
13 #include "am4372.dtsi"
14 #include <dt-bindings/pinctrl/am43xx.h>
15 #include <dt-bindings/pwm/pwm.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/input/input.h>
20 model = "TI AM437x SK EVM";
21 compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
28 compatible = "pwm-backlight";
29 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
30 brightness-levels = <0 51 53 56 62 75 101 152 255>;
31 default-brightness-level = <8>;
35 compatible = "ti,da830-evm-audio";
36 ti,model = "AM437x-SK-EVM";
37 ti,audio-codec = <&tlv320aic3106>;
38 ti,mcasp-controller = <&mcasp1>;
39 ti,codec-clock-rate = <24000000>;
41 "Headphone Jack", "HPLOUT",
42 "Headphone Jack", "HPROUT";
45 matrix_keypad: matrix_keypad@0 {
46 compatible = "gpio-matrix-keypad";
48 pinctrl-names = "default";
49 pinctrl-0 = <&matrix_keypad_pins>;
51 debounce-delay-ms = <5>;
52 col-scan-delay-us = <1500>;
54 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
55 &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
57 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
58 &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */
61 MATRIX_KEY(0, 0, KEY_DOWN)
62 MATRIX_KEY(0, 1, KEY_RIGHT)
63 MATRIX_KEY(1, 0, KEY_LEFT)
64 MATRIX_KEY(1, 1, KEY_UP)
69 compatible = "gpio-leds";
71 pinctrl-names = "default";
72 pinctrl-0 = <&leds_pins>;
75 label = "am437x-sk:red:heartbeat";
76 gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
77 linux,default-trigger = "heartbeat";
78 default-state = "off";
82 label = "am437x-sk:green:mmc1";
83 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
84 linux,default-trigger = "mmc0";
85 default-state = "off";
89 label = "am437x-sk:blue:cpu0";
90 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
91 linux,default-trigger = "cpu0";
92 default-state = "off";
96 label = "am437x-sk:blue:usr3";
97 gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
98 default-state = "off";
103 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
106 pinctrl-names = "default";
107 pinctrl-0 = <&lcd_pins>;
109 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
112 clock-frequency = <9000000>;
124 pixelclk-active = <1>;
129 remote-endpoint = <&dpi_out>;
136 matrix_keypad_pins: matrix_keypad_pins {
137 pinctrl-single,pins = <
138 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
139 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
140 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
141 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
145 leds_pins: leds_pins {
146 pinctrl-single,pins = <
147 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
148 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
149 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
150 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
154 i2c0_pins: i2c0_pins {
155 pinctrl-single,pins = <
156 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
157 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
161 i2c1_pins: i2c1_pins {
162 pinctrl-single,pins = <
163 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
164 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
168 mmc1_pins: pinmux_mmc1_pins {
169 pinctrl-single,pins = <
170 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
174 ecap0_pins: backlight_pins {
175 pinctrl-single,pins = <
176 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
180 edt_ft5306_ts_pins: edt_ft5306_ts_pins {
181 pinctrl-single,pins = <
182 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
183 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
187 cpsw_default: cpsw_default {
188 pinctrl-single,pins = <
190 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
191 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
192 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
193 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
194 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
195 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
196 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
197 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
198 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
199 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
200 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
201 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
204 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
205 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
206 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
207 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
208 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
209 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
210 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
211 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
212 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
213 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
214 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
215 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
219 cpsw_sleep: cpsw_sleep {
220 pinctrl-single,pins = <
221 /* Slave 1 reset value */
222 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
223 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
224 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
225 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
226 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
227 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
228 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
229 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
230 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
231 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
232 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
233 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
235 /* Slave 2 reset value */
236 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
237 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
238 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
239 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
240 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
241 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
242 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
243 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
244 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
245 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
246 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
247 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
251 davinci_mdio_default: davinci_mdio_default {
252 pinctrl-single,pins = <
254 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
255 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
259 davinci_mdio_sleep: davinci_mdio_sleep {
260 pinctrl-single,pins = <
261 /* MDIO reset value */
262 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
263 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
268 pinctrl-single,pins = <
269 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
270 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
271 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
272 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
273 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
274 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
275 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
276 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
277 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
278 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
279 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
280 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
281 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
282 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
283 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
284 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
285 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
286 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
287 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
288 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
289 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
290 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
291 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
292 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
293 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
294 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
295 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
296 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
301 qspi_pins: qspi_pins {
302 pinctrl-single,pins = <
303 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
304 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
305 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
306 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
307 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
308 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
312 mcasp1_pins: mcasp1_pins {
313 pinctrl-single,pins = <
314 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
315 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
316 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
317 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
322 pinctrl-single,pins = <
323 /* GPIO 5_8 to select LCD / HDMI */
324 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
331 pinctrl-names = "default";
332 pinctrl-0 = <&i2c0_pins>;
333 clock-frequency = <400000>;
336 compatible = "ti,tps65218";
338 interrupt-parent = <&gic>;
339 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
340 interrupt-controller;
341 #interrupt-cells = <2>;
343 dcdc1: regulator-dcdc1 {
344 compatible = "ti,tps65218-dcdc1";
345 /* VDD_CORE limits min of OPP50 and max of OPP100 */
346 regulator-name = "vdd_core";
347 regulator-min-microvolt = <912000>;
348 regulator-max-microvolt = <1144000>;
353 dcdc2: regulator-dcdc2 {
354 compatible = "ti,tps65218-dcdc2";
355 /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
356 regulator-name = "vdd_mpu";
357 regulator-min-microvolt = <912000>;
358 regulator-max-microvolt = <1378000>;
363 dcdc3: regulator-dcdc3 {
364 compatible = "ti,tps65218-dcdc3";
365 regulator-name = "vdds_ddr";
366 regulator-min-microvolt = <1350000>;
367 regulator-max-microvolt = <1350000>;
372 dcdc4: regulator-dcdc4 {
373 compatible = "ti,tps65218-dcdc4";
374 regulator-name = "v3_3d";
375 regulator-min-microvolt = <3300000>;
376 regulator-max-microvolt = <3300000>;
381 ldo1: regulator-ldo1 {
382 compatible = "ti,tps65218-ldo1";
383 regulator-name = "v1_8d";
384 regulator-min-microvolt = <1800000>;
385 regulator-max-microvolt = <1800000>;
393 compatible = "at24,24c256";
401 pinctrl-names = "default";
402 pinctrl-0 = <&i2c1_pins>;
403 clock-frequency = <400000>;
407 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
408 pinctrl-names = "default";
409 pinctrl-0 = <&edt_ft5306_ts_pins>;
412 interrupt-parent = <&gpio0>;
415 wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
417 touchscreen-size-x = <480>;
418 touchscreen-size-y = <272>;
421 tlv320aic3106: tlv320aic3106@1b {
422 compatible = "ti,tlv320aic3106";
427 AVDD-supply = <&dcdc4>;
428 IOVDD-supply = <&dcdc4>;
429 DRVDD-supply = <&dcdc4>;
430 DVDD-supply = <&ldo1>;
434 compatible = "st,lis331dlh";
438 Vdd-supply = <&dcdc4>;
439 Vdd_IO-supply = <&dcdc4>;
440 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
450 pinctrl-names = "default";
451 pinctrl-0 = <&ecap0_pins>;
468 pinctrl-names = "default";
469 pinctrl-0 = <&mmc1_pins>;
471 vmmc-supply = <&dcdc4>;
473 cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
481 dr_mode = "peripheral";
496 pinctrl-names = "default";
497 pinctrl-0 = <&qspi_pins>;
499 spi-max-frequency = <48000000>;
501 compatible = "mx66l51235l";
502 spi-max-frequency = <48000000>;
506 spi-tx-bus-width = <1>;
507 spi-rx-bus-width = <4>;
508 #address-cells = <1>;
511 /* MTD partition table.
512 * The ROM checks the first 512KiB
513 * for a valid file to boot(XIP).
516 label = "QSPI.U_BOOT";
517 reg = <0x00000000 0x000080000>;
520 label = "QSPI.U_BOOT.backup";
521 reg = <0x00080000 0x00080000>;
524 label = "QSPI.U-BOOT-SPL_OS";
525 reg = <0x00100000 0x00010000>;
528 label = "QSPI.U_BOOT_ENV";
529 reg = <0x00110000 0x00010000>;
532 label = "QSPI.U-BOOT-ENV.backup";
533 reg = <0x00120000 0x00010000>;
536 label = "QSPI.KERNEL";
537 reg = <0x00130000 0x0800000>;
540 label = "QSPI.FILESYSTEM";
541 reg = <0x00930000 0x36D0000>;
547 pinctrl-names = "default", "sleep";
548 pinctrl-0 = <&cpsw_default>;
549 pinctrl-1 = <&cpsw_sleep>;
555 pinctrl-names = "default", "sleep";
556 pinctrl-0 = <&davinci_mdio_default>;
557 pinctrl-1 = <&davinci_mdio_sleep>;
562 phy_id = <&davinci_mdio>, <4>;
564 dual_emac_res_vlan = <1>;
568 phy_id = <&davinci_mdio>, <5>;
570 dual_emac_res_vlan = <2>;
578 pinctrl-names = "default";
579 pinctrl-0 = <&mcasp1_pins>;
596 pinctrl-names = "default";
597 pinctrl-0 = <&dss_pins>;
600 dpi_out: endpoint@0 {
601 remote-endpoint = <&lcd_in>;