arch/arm/boot/dts/am437x-sk-evm.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /* AM437x SK EVM */
  10
  11 /dts-v1/;
  12
  13 #include "am4372.dtsi"
  14 #include <dt-bindings/pinctrl/am43xx.h>
  15 #include <dt-bindings/pwm/pwm.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/input/input.h>
  18
  19 / {
  20         model = "TI AM437x SK EVM";
  21         compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
  22
  23         aliases {
  24                 display0 = &lcd0;
  25         };
  26
  27         backlight {
  28                 compatible = "pwm-backlight";
  29                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
  30                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
  31                 default-brightness-level = <8>;
  32         };
  33
  34         sound {
  35                 compatible = "ti,da830-evm-audio";
  36                 ti,model = "AM437x-SK-EVM";
  37                 ti,audio-codec = <&tlv320aic3106>;
  38                 ti,mcasp-controller = <&mcasp1>;
  39                 ti,codec-clock-rate = <24000000>;
  40                 ti,audio-routing =
  41                         "Headphone Jack",       "HPLOUT",
  42                         "Headphone Jack",       "HPROUT";
  43         };
  44
  45         matrix_keypad: matrix_keypad@0 {
  46                 compatible = "gpio-matrix-keypad";
  47
  48                 pinctrl-names = "default";
  49                 pinctrl-0 = <&matrix_keypad_pins>;
  50
  51                 debounce-delay-ms = <5>;
  52                 col-scan-delay-us = <1500>;
  53
  54                 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH          /* Bank5, pin5 */
  55                                 &gpio5 6 GPIO_ACTIVE_HIGH>;     /* Bank5, pin6 */
  56
  57                 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH         /* Bank5, pin13 */
  58                                 &gpio5 4 GPIO_ACTIVE_HIGH>;     /* Bank5, pin4 */
  59
  60                 linux,keymap = <
  61                                 MATRIX_KEY(0, 0, KEY_DOWN)
  62                                 MATRIX_KEY(0, 1, KEY_RIGHT)
  63                                 MATRIX_KEY(1, 0, KEY_LEFT)
  64                                 MATRIX_KEY(1, 1, KEY_UP)
  65                         >;
  66         };
  67
  68         leds {
  69                 compatible = "gpio-leds";
  70
  71                 pinctrl-names = "default";
  72                 pinctrl-0 = <&leds_pins>;
  73
  74                 led@0 {
  75                         label = "am437x-sk:red:heartbeat";
  76                         gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 0 */
  77                         linux,default-trigger = "heartbeat";
  78                         default-state = "off";
  79                 };
  80
  81                 led@1 {
  82                         label = "am437x-sk:green:mmc1";
  83                         gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 1 */
  84                         linux,default-trigger = "mmc0";
  85                         default-state = "off";
  86                 };
  87
  88                 led@2 {
  89                         label = "am437x-sk:blue:cpu0";
  90                         gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 2 */
  91                         linux,default-trigger = "cpu0";
  92                         default-state = "off";
  93                 };
  94
  95                 led@3 {
  96                         label = "am437x-sk:blue:usr3";
  97                         gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 3 */
  98                         default-state = "off";
  99                 };
 100         };
 101
 102         lcd0: display {
 103                 compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
 104                 label = "lcd";
 105
 106                 pinctrl-names = "default";
 107                 pinctrl-0 = <&lcd_pins>;
 108
 109                 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 110
 111                 panel-timing {
 112                         clock-frequency = <9000000>;
 113                         hactive = <480>;
 114                         vactive = <272>;
 115                         hfront-porch = <2>;
 116                         hback-porch = <2>;
 117                         hsync-len = <41>;
 118                         vfront-porch = <2>;
 119                         vback-porch = <2>;
 120                         vsync-len = <10>;
 121                         hsync-active = <0>;
 122                         vsync-active = <0>;
 123                         de-active = <1>;
 124                         pixelclk-active = <1>;
 125                 };
 126
 127                 port {
 128                         lcd_in: endpoint {
 129                                 remote-endpoint = <&dpi_out>;
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &am43xx_pinmux {
 136         matrix_keypad_pins: matrix_keypad_pins {
 137                 pinctrl-single,pins = <
 138                         0x24c (PIN_OUTPUT | MUX_MODE7)  /* gpio5_13.gpio5_13 */
 139                         0x250 (PIN_OUTPUT | MUX_MODE7)  /* spi4_sclk.gpio5_4 */
 140                         0x254 (PIN_INPUT | MUX_MODE7)   /* spi4_d0.gpio5_5 */
 141                         0x258 (PIN_INPUT | MUX_MODE7)   /* spi4_d1.gpio5_5 */
 142                 >;
 143         };
 144
 145         leds_pins: leds_pins {
 146                 pinctrl-single,pins = <
 147                         0x228 (PIN_OUTPUT | MUX_MODE7)  /* uart3_rxd.gpio5_2 */
 148                         0x22c (PIN_OUTPUT | MUX_MODE7)  /* uart3_txd.gpio5_3 */
 149                         0x230 (PIN_OUTPUT | MUX_MODE7)  /* uart3_ctsn.gpio5_0 */
 150                         0x234 (PIN_OUTPUT | MUX_MODE7)  /* uart3_rtsn.gpio5_1 */
 151                 >;
 152         };
 153
 154         i2c0_pins: i2c0_pins {
 155                 pinctrl-single,pins = <
 156                         0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 157                         0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 158                 >;
 159         };
 160
 161         i2c1_pins: i2c1_pins {
 162                 pinctrl-single,pins = <
 163                         0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 164                         0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 165                 >;
 166         };
 167
 168         mmc1_pins: pinmux_mmc1_pins {
 169                 pinctrl-single,pins = <
 170                         0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
 171                         0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
 172                         0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
 173                         0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
 174                         0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
 175                         0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
 176                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 177                 >;
 178         };
 179
 180         ecap0_pins: backlight_pins {
 181                 pinctrl-single,pins = <
 182                         0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 183                 >;
 184         };
 185
 186         edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 187                 pinctrl-single,pins = <
 188                         0x74 (PIN_INPUT | MUX_MODE7)    /* gpmc_wpn.gpio0_31 */
 189                         0x78 (PIN_OUTPUT | MUX_MODE7)   /* gpmc_be1n.gpio1_28 */
 190                 >;
 191         };
 192
 193         cpsw_default: cpsw_default {
 194                 pinctrl-single,pins = <
 195                         /* Slave 1 */
 196                         0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
 197                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
 198                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
 199                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
 200                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
 201                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
 202                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxclk.rmii1_rclk */
 203                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxdv.rgmii1_rctl */
 204                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd0 */
 205                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd1 */
 206                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd2 */
 207                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd3 */
 208
 209                         /* Slave 2 */
 210                         0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a6.rgmii2_tclk */
 211                         0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a0.rgmii2_tctl */
 212                         0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a5.rgmii2_td0 */
 213                         0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a4.rgmii2_td1 */
 214                         0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a3.rgmii2_td2 */
 215                         0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a2.rgmii2_td3 */
 216                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a7.rgmii2_rclk */
 217                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a1.rgmii2_rtcl */
 218                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a11.rgmii2_rd0 */
 219                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a10.rgmii2_rd1 */
 220                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a9.rgmii2_rd2 */
 221                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a8.rgmii2_rd3 */
 222                 >;
 223         };
 224
 225         cpsw_sleep: cpsw_sleep {
 226                 pinctrl-single,pins = <
 227                         /* Slave 1 reset value */
 228                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 229                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 230                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 231                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 232                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 233                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 234                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 235                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 236                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 237                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 238                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 239                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 240
 241                         /* Slave 2 reset value */
 242                         0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 243                         0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 244                         0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 245                         0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 246                         0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 247                         0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 248                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 249                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 250                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 251                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 252                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 253                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 254                 >;
 255         };
 256
 257         davinci_mdio_default: davinci_mdio_default {
 258                 pinctrl-single,pins = <
 259                         /* MDIO */
 260                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 261                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 262                 >;
 263         };
 264
 265         davinci_mdio_sleep: davinci_mdio_sleep {
 266                 pinctrl-single,pins = <
 267                         /* MDIO reset value */
 268                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 269                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 270                 >;
 271         };
 272
 273         dss_pins: dss_pins {
 274                 pinctrl-single,pins = <
 275                         0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1)   /* gpmc ad 8 -> DSS DATA 23 */
 276                         0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 277                         0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 278                         0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
 279                         0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 280                         0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 281                         0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 282                         0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1)   /* gpmc ad 15 -> DSS DATA 16 */
 283                         0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS DATA 0 */
 284                         0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 285                         0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 286                         0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
 287                         0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 288                         0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 289                         0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 290                         0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
 291                         0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 292                         0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 293                         0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 294                         0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
 295                         0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 296                         0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 297                         0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 298                         0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS DATA 15 */
 299                         0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS VSYNC */
 300                         0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS HSYNC */
 301                         0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS PCLK */
 302                         0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* DSS AC BIAS EN */
 303
 304                 >;
 305         };
 306
 307         qspi_pins: qspi_pins {
 308                 pinctrl-single,pins = <
 309                         0x7c (PIN_OUTPUT | MUX_MODE3)   /* gpmc_csn0.qspi_csn */
 310                         0x88 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_csn3.qspi_clk */
 311                         0x90 (PIN_INPUT | MUX_MODE3)    /* gpmc_advn_ale.qspi_d0 */
 312                         0x94 (PIN_INPUT | MUX_MODE3)    /* gpmc_oen_ren.qspi_d1 */
 313                         0x98 (PIN_INPUT | MUX_MODE3)    /* gpmc_wen.qspi_d2 */
 314                         0x9c (PIN_INPUT | MUX_MODE3)    /* gpmc_be0n_cle.qspi_d3 */
 315                 >;
 316         };
 317
 318         mcasp1_pins: mcasp1_pins {
 319                 pinctrl-single,pins = <
 320                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* mii1_crs.mcasp1_aclkx */
 321                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* mii1_rxerr.mcasp1_fsx */
 322                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 323                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* rmii1_ref_clk.mcasp1_axr3 */
 324                 >;
 325         };
 326
 327         lcd_pins: lcd_pins {
 328                 pinctrl-single,pins = <
 329                         0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 330                 >;
 331         };
 332 };
 333
 334 &i2c0 {
 335         status = "okay";
 336         pinctrl-names = "default";
 337         pinctrl-0 = <&i2c0_pins>;
 338         clock-frequency = <400000>;
 339
 340         tps@24 {
 341                 compatible = "ti,tps65218";
 342                 reg = <0x24>;
 343                 interrupt-parent = <&gic>;
 344                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 345                 interrupt-controller;
 346                 #interrupt-cells = <2>;
 347
 348                 dcdc1: regulator-dcdc1 {
 349                         compatible = "ti,tps65218-dcdc1";
 350                         /* VDD_CORE limits min of OPP50 and max of OPP100 */
 351                         regulator-name = "vdd_core";
 352                         regulator-min-microvolt = <912000>;
 353                         regulator-max-microvolt = <1144000>;
 354                         regulator-boot-on;
 355                         regulator-always-on;
 356                 };
 357
 358                 dcdc2: regulator-dcdc2 {
 359                         compatible = "ti,tps65218-dcdc2";
 360                         /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 361                         regulator-name = "vdd_mpu";
 362                         regulator-min-microvolt = <912000>;
 363                         regulator-max-microvolt = <1378000>;
 364                         regulator-boot-on;
 365                         regulator-always-on;
 366                 };
 367
 368                 dcdc3: regulator-dcdc3 {
 369                         compatible = "ti,tps65218-dcdc3";
 370                         regulator-name = "vdds_ddr";
 371                         regulator-min-microvolt = <1500000>;
 372                         regulator-max-microvolt = <1500000>;
 373                         regulator-boot-on;
 374                         regulator-always-on;
 375                 };
 376
 377                 dcdc4: regulator-dcdc4 {
 378                         compatible = "ti,tps65218-dcdc4";
 379                         regulator-name = "v3_3d";
 380                         regulator-min-microvolt = <3300000>;
 381                         regulator-max-microvolt = <3300000>;
 382                         regulator-boot-on;
 383                         regulator-always-on;
 384                 };
 385
 386                 ldo1: regulator-ldo1 {
 387                         compatible = "ti,tps65218-ldo1";
 388                         regulator-name = "v1_8d";
 389                         regulator-min-microvolt = <1800000>;
 390                         regulator-max-microvolt = <1800000>;
 391                         regulator-boot-on;
 392                         regulator-always-on;
 393                 };
 394
 395         };
 396
 397         at24@50 {
 398                 compatible = "at24,24c256";
 399                 pagesize = <64>;
 400                 reg = <0x50>;
 401         };
 402 };
 403
 404 &i2c1 {
 405         status = "okay";
 406         pinctrl-names = "default";
 407         pinctrl-0 = <&i2c1_pins>;
 408         clock-frequency = <400000>;
 409
 410         edt-ft5306@38 {
 411                 status = "okay";
 412                 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
 413                 pinctrl-names = "default";
 414                 pinctrl-0 = <&edt_ft5306_ts_pins>;
 415
 416                 reg = <0x38>;
 417                 interrupt-parent = <&gpio0>;
 418                 interrupts = <31 0>;
 419
 420                 wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 421
 422                 touchscreen-size-x = <480>;
 423                 touchscreen-size-y = <272>;
 424         };
 425
 426         tlv320aic3106: tlv320aic3106@1b {
 427                 compatible = "ti,tlv320aic3106";
 428                 reg = <0x1b>;
 429                 status = "okay";
 430
 431                 /* Regulators */
 432                 AVDD-supply = <&dcdc4>;
 433                 IOVDD-supply = <&dcdc4>;
 434                 DRVDD-supply = <&dcdc4>;
 435                 DVDD-supply = <&ldo1>;
 436         };
 437
 438         lis331dlh@18 {
 439                 compatible = "st,lis331dlh";
 440                 reg = <0x18>;
 441                 status = "okay";
 442
 443                 Vdd-supply = <&dcdc4>;
 444                 Vdd_IO-supply = <&dcdc4>;
 445                 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
 446         };
 447 };
 448
 449 &epwmss0 {
 450         status = "okay";
 451 };
 452
 453 &ecap0 {
 454         status = "okay";
 455         pinctrl-names = "default";
 456         pinctrl-0 = <&ecap0_pins>;
 457 };
 458
 459 &gpio0 {
 460         status = "okay";
 461 };
 462
 463 &gpio1 {
 464         status = "okay";
 465 };
 466
 467 &gpio5 {
 468         status = "okay";
 469 };
 470
 471 &mmc1 {
 472         status = "okay";
 473         pinctrl-names = "default";
 474         pinctrl-0 = <&mmc1_pins>;
 475
 476         vmmc-supply = <&dcdc4>;
 477         bus-width = <4>;
 478         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 479 };
 480
 481 &usb2_phy1 {
 482         status = "okay";
 483 };
 484
 485 &usb1 {
 486         dr_mode = "peripheral";
 487         status = "okay";
 488 };
 489
 490 &usb2_phy2 {
 491         status = "okay";
 492 };
 493
 494 &usb2 {
 495         dr_mode = "host";
 496         status = "okay";
 497 };
 498
 499 &qspi {
 500         status = "okay";
 501         pinctrl-names = "default";
 502         pinctrl-0 = <&qspi_pins>;
 503
 504         spi-max-frequency = <48000000>;
 505         m25p80@0 {
 506                 compatible = "mx66l51235l";
 507                 spi-max-frequency = <48000000>;
 508                 reg = <0>;
 509                 spi-cpol;
 510                 spi-cpha;
 511                 spi-tx-bus-width = <1>;
 512                 spi-rx-bus-width = <4>;
 513                 #address-cells = <1>;
 514                 #size-cells = <1>;
 515
 516                 /* MTD partition table.
 517                  * The ROM checks the first 512KiB
 518                  * for a valid file to boot(XIP).
 519                  */
 520                 partition@0 {
 521                         label = "QSPI.U_BOOT";
 522                         reg = <0x00000000 0x000080000>;
 523                 };
 524                 partition@1 {
 525                         label = "QSPI.U_BOOT.backup";
 526                         reg = <0x00080000 0x00080000>;
 527                 };
 528                 partition@2 {
 529                         label = "QSPI.U-BOOT-SPL_OS";
 530                         reg = <0x00100000 0x00010000>;
 531                 };
 532                 partition@3 {
 533                         label = "QSPI.U_BOOT_ENV";
 534                         reg = <0x00110000 0x00010000>;
 535                 };
 536                 partition@4 {
 537                         label = "QSPI.U-BOOT-ENV.backup";
 538                         reg = <0x00120000 0x00010000>;
 539                 };
 540                 partition@5 {
 541                         label = "QSPI.KERNEL";
 542                         reg = <0x00130000 0x0800000>;
 543                 };
 544                 partition@6 {
 545                         label = "QSPI.FILESYSTEM";
 546                         reg = <0x00930000 0x36D0000>;
 547                 };
 548         };
 549 };
 550
 551 &mac {
 552         pinctrl-names = "default", "sleep";
 553         pinctrl-0 = <&cpsw_default>;
 554         pinctrl-1 = <&cpsw_sleep>;
 555         dual_emac = <1>;
 556         status = "okay";
 557 };
 558
 559 &davinci_mdio {
 560         pinctrl-names = "default", "sleep";
 561         pinctrl-0 = <&davinci_mdio_default>;
 562         pinctrl-1 = <&davinci_mdio_sleep>;
 563         status = "okay";
 564 };
 565
 566 &cpsw_emac0 {
 567         phy_id = <&davinci_mdio>, <4>;
 568         phy-mode = "rgmii";
 569         dual_emac_res_vlan = <1>;
 570 };
 571
 572 &cpsw_emac1 {
 573         phy_id = <&davinci_mdio>, <5>;
 574         phy-mode = "rgmii";
 575         dual_emac_res_vlan = <2>;
 576 };
 577
 578 &elm {
 579         status = "okay";
 580 };
 581
 582 &mcasp1 {
 583         pinctrl-names = "default";
 584         pinctrl-0 = <&mcasp1_pins>;
 585
 586         status = "okay";
 587
 588         op-mode = <0>;
 589         tdm-slots = <2>;
 590         serial-dir = <
 591                 0 0 1 2
 592         >;
 593
 594         tx-num-evt = <1>;
 595         rx-num-evt = <1>;
 596 };
 597
 598 &dss {
 599         status = "okay";
 600
 601         pinctrl-names = "default";
 602         pinctrl-0 = <&dss_pins>;
 603
 604         port {
 605                 dpi_out: endpoint@0 {
 606                         remote-endpoint = <&lcd_in>;
 607                         data-lines = <24>;
 608                 };
 609         };
 610 };
 611
 612 &rtc {
 613         status = "okay";
 614 };
 615
 616 &wdt {
 617         status = "okay";
 618 };
 619
 620 &cpu {
 621         cpu0-supply = <&dcdc2>;
 622 };