1 CDSChecker: A Model Checker for C11 and C++11 Atomics
2 =====================================================
4 Copyright © 2013 Regents of the University of California. All rights reserved.
6 CDSChecker is distributed under the GPL v2. See the LICENSE file for details.
12 CDSChecker is a model checker for C11/C++11 which exhaustively explores the
13 behaviors of code under the C/C++ memory model. It uses partial order reduction
14 as well as a few other novel techniques to eliminate time spent on redundant
15 execution behaviors and to significantly shrink the state space. The model
16 checking algorithm is described in more detail in this paper (published in
19 > <http://demsky.eecs.uci.edu/publications/c11modelcheck.pdf>
21 It is designed to support unit tests on concurrent data structure written using
24 CDSChecker is constructed as a dynamically-linked shared library which
25 implements the C and C++ atomic types and portions of the other thread-support
26 libraries of C/C++ (e.g., std::atomic, std::mutex, etc.). Notably, we only
27 support the C version of threads (i.e., `thrd_t` and similar, from `<threads.h>`),
28 because C++ threads require features which are only available to a C++11
29 compiler (and we want to support others, at least for now).
31 CDSChecker should compile on Linux and Mac OSX with no dependencies and has been
32 tested with LLVM (clang/clang++) and GCC. It likely can be ported to other \*NIX
33 flavors. We have not attempted to port to Windows.
39 If you haven't done so already, you may download CDSChecker using
40 [git](http://git-scm.com/) (for those without git, snapshots can be found at the
43 git clone git://demsky.eecs.uci.edu/model-checker.git
45 Get the benchmarks (not required; distributed separately):
48 git clone git://demsky.eecs.uci.edu/model-checker-benchmarks.git benchmarks
50 Compile the model checker:
54 Compile the benchmarks:
58 Run a simple example (the `run.sh` script does some very minimal processing for
61 ./run.sh test/userprog.o
63 To see the help message on how to run CDSChecker, execute:
73 > Controls the liveness of the memory system. Note that multithreaded programs
74 > often rely on memory liveness for termination, so this parameter is
75 > necessary for such programs.
77 > Liveness is controlled by `num`: the number of times a load is allowed to
78 > see the same store when a newer store exists---one that is ordered later in
79 > the modification order.
83 > Turns on CHESS-like yield-based fairness support (requires `thrd_yield()`
84 > instrumentation in test program).
88 > Turns on alternative fairness support (less desirable than `-y`).
92 > Verbose: show all executions and not just buggy ones.
96 > Constrain how long we will run to wait for a future value past when it is
101 > Value to provide to atomics loads from uninitialized memory locations. The
102 > default is 0, but this may cause some programs to throw exceptions
103 > (segfault) before the model checker prints a trace.
117 Many simple tests are located in the `tests/` directory. You may also want to
118 try the larger benchmarks (distributed separately), which can be placed under
119 the `benchmarks/` directory. After building CDSChecker, you can build and run
120 the benchmarks as follows:
125 > # run barrier test with fairness/memory liveness
126 > ./run.sh barrier/barrier -y -m 2
128 > # Linux reader/write lock test with fairness/memory liveness
129 > ./run.sh linuxrwlocks/linuxrwlocks -y -m 2
131 > # run all benchmarks and provide timing results
135 Running your own code
136 ---------------------
138 You likely want to test your own code, not just our simple tests. To do so, you
139 need to perform a few steps.
141 First, because CDSChecker executes your program dozens (if not hundreds or
142 thousands) of times, you will have the most success if your code is written as a
143 unit test and not as a full-blown program.
145 Second, because CDSChecker must be able to manage your program for you, your
146 program should declare its main entry point as `user_main(int, char**)` rather
147 than `main(int, char**)`.
149 Third, test programs should use the standard C11/C++11 library headers
150 (`<atomic>`/`<stdatomic.h>`, `<mutex>`, `<condition_variable>`, `<thread.h>`).
151 As of now, we only support C11 thread syntax (`thrd_t`, etc. from
154 Test programs may also use our included happens-before race detector by
155 including <librace.h> and utilizing the appropriate functions
156 (`store_{8,16,32,64}()` and `load_{8,16,32,64}()`) for loading/storing data from/to
157 non-atomic shared memory.
159 CDSChecker can also check boolean assertions in your test programs. Just
160 include `<model-assert.h>` and use the `MODEL_ASSERT()` macro in your test program.
161 CDSChecker will report a bug in any possible execution in which the argument to
162 `MODEL_ASSERT()` evaluates to false (that is, 0).
164 Test programs should be compiled against our shared library (libmodel.so) using
165 the headers in the `include/` directory. Then the shared library must be made
166 available to the dynamic linker, using the `LD_LIBRARY_PATH` environment
167 variable, for instance.
170 Reading an execution trace
171 --------------------------
173 When CDSChecker detects a bug in your program (or when run with the `--verbose`
174 flag), it prints the output of the program run (STDOUT) along with some summary
175 trace information for the execution in question. The trace is given as a
176 sequence of lines, where each line represents an operation in the execution
177 trace. These lines are ordered by the order in which they were run by CDSChecker
178 (i.e., the "execution order"), which does not necessarily align with the "order"
179 of the values observed (i.e., the modification order or the reads-from
182 The following list describes each of the columns in the execution trace output:
184 * \#: The sequence number within the execution. That is, sequence number "9"
185 means the operation was the 9th operation executed by CDSChecker. Note that
186 this represents the execution order, not necessarily any other order (e.g.,
187 modification order or reads-from).
189 * t: The thread number
191 * Action type: The type of operation performed
193 * MO: The memory-order for this operation (i.e., `memory_order_XXX`, where `XXX` is
194 `relaxed`, `release`, `acquire`, `rel_acq`, or `seq_cst`)
196 * Location: The memory location on which this operation is operating. This is
197 well-defined for atomic write/read/RMW, but other operations are subject to
198 CDSChecker implementation details.
200 * Value: For reads/writes/RMW, the value returned by the operation. Note that
201 for RMW, this is the value that is *read*, not the value that was *written*.
202 For other operations, 'value' may have some CDSChecker-internal meaning, or
203 it may simply be a don't-care (such as `0xdeadbeef`).
205 * Rf: For reads, the sequence number of the operation from which it reads.
206 [Note: If the execution is a partial, infeasible trace (labeled INFEASIBLE),
207 as printed during `--verbose` execution, reads may not be resolved and so may
208 have Rf=? or Rf=Px, where x is a promised future value.]
210 * CV: The clock vector, encapsulating the happens-before relation (see our
211 paper, or the C/C++ memory model itself). We use a Lamport-style clock vector
212 similar to [1]. The "clock" is just the sequence number (#). The clock vector
213 can be read as follows:
215 Each entry is indexed as CV[i], where
217 i = 0, 1, 2, ..., <number of threads>
219 So for any thread i, we say CV[i] is the sequence number of the most recent
220 operation in thread i such that operation i happens-before this operation.
221 Notably, thread 0 is reserved as a dummy thread for certain CDSChecker
224 See the following example trace:
227 ------------------------------------------------------------------------------------
228 # t Action type MO Location Value Rf CV
229 ------------------------------------------------------------------------------------
230 1 1 thread start seq_cst 0x7f68ff11e7c0 0xdeadbeef ( 0, 1)
231 2 1 init atomic relaxed 0x601068 0 ( 0, 2)
232 3 1 init atomic relaxed 0x60106c 0 ( 0, 3)
233 4 1 thread create seq_cst 0x7f68fe51c710 0x7f68fe51c6e0 ( 0, 4)
234 5 2 thread start seq_cst 0x7f68ff11ebc0 0xdeadbeef ( 0, 4, 5)
235 6 2 atomic read relaxed 0x60106c 0 3 ( 0, 4, 6)
236 7 1 thread create seq_cst 0x7f68fe51c720 0x7f68fe51c6e0 ( 0, 7)
237 8 3 thread start seq_cst 0x7f68ff11efc0 0xdeadbeef ( 0, 7, 0, 8)
238 9 2 atomic write relaxed 0x601068 0 ( 0, 4, 9)
239 10 3 atomic read relaxed 0x601068 0 2 ( 0, 7, 0, 10)
240 11 2 thread finish seq_cst 0x7f68ff11ebc0 0xdeadbeef ( 0, 4, 11)
241 12 3 atomic write relaxed 0x60106c 0x2a ( 0, 7, 0, 12)
242 13 1 thread join seq_cst 0x7f68ff11ebc0 0x2 ( 0, 13, 11)
243 14 3 thread finish seq_cst 0x7f68ff11efc0 0xdeadbeef ( 0, 7, 0, 14)
244 15 1 thread join seq_cst 0x7f68ff11efc0 0x3 ( 0, 15, 11, 14)
245 16 1 thread finish seq_cst 0x7f68ff11e7c0 0xdeadbeef ( 0, 16, 11, 14)
247 ------------------------------------------------------------------------------------
250 Now consider, for example, operation 10:
252 This is the 10th operation in the execution order. It is an atomic read-relaxed
253 operation performed by thread 3 at memory address `0x601068`. It reads the value
254 "0", which was written by the 2nd operation in the execution order. Its clock
255 vector consists of the following values:
257 CV[0] = 0, CV[1] = 7, CV[2] = 0, CV[3] = 10
260 Other Notes and Pitfalls
261 ------------------------
263 * Deadlock detection: CDSChecker can detect deadlocks. For instance, try the
264 following test program.
266 > ./run.sh test/deadlock.o
268 Deadlock detection currently detects when a thread is about to step into a
269 deadlock, without actually including the final step in the trace. But you can
270 examine the program to see the next step.
272 * CDSChecker has to speculatively explore many execution behaviors due to the
273 relaxed memory model, and many of these turn out to be infeasible (that is,
274 they cannot be legally produced by the memory model). CDSChecker discards
275 these executions as soon as it identifies them (see the "Number of infeasible
276 executions" statistic); however, the speculation can occasionally cause
277 CDSChecker to hit unexpected parts of the unit test program (causing a
278 division by 0, for instance). In such programs, you might consider running
279 CDSChecker with the `-u num` option.
281 * Related to the previous point, CDSChecker may report more than one bug for a
282 particular candidate execution. This is because some bugs may not be
283 reportable until CDSChecker has explored more of the program, and in the
284 time between initial discovery and final assessment of the bug, CDSChecker may
285 discover another bug.
287 * Data races may be reported as multiple bugs, one for each byte-address of the
288 data race in question. See, for example, this run:
290 $ ./run.sh test/releaseseq.o
292 Bug report: 4 bugs detected
293 [BUG] Data race detected @ address 0x601078:
294 Access 1: write in thread 2 @ clock 4
295 Access 2: read in thread 3 @ clock 9
296 [BUG] Data race detected @ address 0x601079:
297 Access 1: write in thread 2 @ clock 4
298 Access 2: read in thread 3 @ clock 9
299 [BUG] Data race detected @ address 0x60107a:
300 Access 1: write in thread 2 @ clock 4
301 Access 2: read in thread 3 @ clock 9
302 [BUG] Data race detected @ address 0x60107b:
303 Access 1: write in thread 2 @ clock 4
304 Access 2: read in thread 3 @ clock 9
310 The CDSChecker project page:
312 > <http://demsky.eecs.uci.edu/c11modelchecker.php>
314 The CDSChecker source and accompanying benchmarks on Gitweb:
316 > <http://demsky.eecs.uci.edu/git/?p=model-checker.git>
318 > <http://demsky.eecs.uci.edu/git/?p=model-checker-benchmarks.git>
324 Please feel free to contact us for more information. Bug reports are welcome,
325 and we are happy to hear from our users. We are also very interested to know if
326 CDSChecker catches bugs in your programs.
328 Contact Brian Norris at <banorris@uci.edu> or Brian Demsky at <bdemsky@uci.edu>.
334 [1] L. Lamport. Time, clocks, and the ordering of events in a distributed
335 system. CACM, 21(7):558-565, July 1978.