1 * TI Highspeed MMC host controller for OMAP
3 The Highspeed MMC Host Controller on TI OMAP family
4 provides an interface for MMC, SD, and SDIO types of memory cards.
6 This file documents differences between the core properties described
7 by mmc.txt and the properties used by the omap_hsmmc driver.
11 Should be "ti,omap2-hsmmc", for OMAP2 controllers
12 Should be "ti,omap3-hsmmc", for OMAP3 controllers
13 Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0
14 Should be "ti,omap4-hsmmc", for OMAP4 controllers
15 - ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
18 ti,dual-volt: boolean, supports dual voltage cards
19 <supply-name>-supply: phandle to the regulator device tree node
20 "supply-name" examples are "vmmc", "vmmc_aux" etc
21 ti,non-removable: non-removable slot (like eMMC)
22 ti,needs-special-reset: Requires a special softreset sequence
23 ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
24 dmas: List of DMA specifiers with the controller specific format
25 as described in the generic DMA client binding. A tx and rx
26 specifier is required.
27 dma-names: List of DMA request names. These strings correspond
28 1:1 with the DMA specifiers listed in dmas. The string naming is
29 to be "rx" and "tx" for RX and TX DMA requests, respectively.
33 [hwmod populated DMA resources]
35 mmc1: mmc@0x4809c000 {
36 compatible = "ti,omap4-hsmmc";
37 reg = <0x4809c000 0x400>;
41 vmmc-supply = <&vmmc>; /* phandle to regulator node */
45 [generic DMA request binding]
47 mmc1: mmc@0x4809c000 {
48 compatible = "ti,omap4-hsmmc";
49 reg = <0x4809c000 0x400>;
53 vmmc-supply = <&vmmc>; /* phandle to regulator node */
57 dma-names = "tx", "rx";