1 Rockchip specific extensions to the Synopsys Designware MIPI DSI
2 ================================
5 - #address-cells: Should be <1>.
6 - #size-cells: Should be <0>.
7 - compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
8 or "rockchip,rk3368-mipi-dsi", "snps,dw-mipi-dsi".
9 or "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi".
10 - reg: Represent the physical address range of the controller.
11 - interrupts: Represent the controller's interrupt to the CPU(s).
12 - clocks, clock-names: Phandles to the controller's APB clock(pclk) as
14 - rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
15 - ports: contain a port node with endpoint definitions as defined in [2].
16 For vopb,set the reg = <0> and set the reg = <1> for vopl.
19 - clocks, clock-names: phandle to the mipi dsi phy config clock, name should be
20 "phy_cfg".phandle to the mipi dsi phy reference clock, name should be 'ref'.
21 - phys: phandle to third party MIPI PHY node
22 - phy-names: the string "mipi_dphy" when is found in a node, along with "phys"
23 attribute, provides phandle to MIPI PHY node
24 - resets : phandle to the reset of MIPI DSI APB Clock.
25 - reset-names : should be "apb".
27 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
28 [2] Documentation/devicetree/bindings/media/video-interfaces.txt
29 [3] Documentation/devicetree/bindings/reset/reset.txt
35 mipi_dsi: mipi@ff960000 {
38 compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
39 reg = <0xff960000 0x4000>;
40 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
41 clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>,
42 <&cru SCLK_DPHY_TX0_CFG>;
43 clock-names = "ref", "pclk", "phy_cfg";
44 rockchip,grf = <&grf>;
55 mipi_in_vopb: endpoint@0 {
57 remote-endpoint = <&vopb_out_mipi>;
59 mipi_in_vopl: endpoint@1 {
61 remote-endpoint = <&vopl_out_mipi>;
67 compatible ="boe,tv080wum-nl0";
70 enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
71 pinctrl-names = "default";
72 pinctrl-0 = <&lcd_en>;
73 backlight = <&backlight>;
80 mipi_dsi_host: mipi-dsi-host@ff960000 {
81 compatible = "rockchip,rk3368-mipi-dsi";
83 phy-names = "mipi_dphy";
84 resets = <&cru SRST_MIPIDSI0>;
97 mipi_in_vop: endpoint@0 {
99 remote-endpoint = <&vop_out_mipi>;
105 compatible = "simple-panel-dsi";